HG00896A - Uncategorized Livarno Lux - Free user manual and instructions

Brand	Livarno Lux
Model	HG00896A
Product Type	LED Desk Lamp
Dimensions (L x W x H)	45 x 15 x 10 cm
Weight	0.8 kg
Power Supply	5V DC, 1A (USB cable included)
Power Consumption	5 W
Number of LEDs	30
Brightness Levels	3 levels (low, medium, high)
Color Temperature	3000K (warm) / 5000K (cool)
Adjustable Arm	Yes, flexible gooseneck
Timer Function	1 hour auto-off timer
Material	Aluminum, ABS plastic
Color	Black / White
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use abrasive cleaners.
Safety Precautions	Keep away from water and high humidity. Do not disassemble.
Spare Parts Availability	Contact manufacturer or authorized dealer for replacement parts.
Warranty	2 years

Frequently Asked Questions - HG00896A Livarno Lux

How do I adjust the brightness?

Touch the sensor on the base to cycle through three brightness levels: low, medium, and high.

Can I change the color temperature?

Yes, press and hold the touch sensor for 2 seconds to toggle between warm (3000K) and cool (5000K) light.

Does the lamp have an auto-off timer?

Yes, it has a 1-hour timer. Activate it by double-tapping the sensor; the lamp will turn off automatically after one hour.

Is the lamp USB powered?

Yes, it runs on 5V DC via a USB cable. You can plug it into any standard USB port (computer, adapter, power bank).

Can I use it with a power bank?

Absolutely. Since it requires only 5V/1A, it works perfectly with most power banks for portable use.

How should I clean the lamp?

Use a soft, dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol or abrasive cleaners.

Is this lamp suitable for reading?

Yes, with adjustable brightness and color temperature, it provides eye-friendly lighting ideal for reading, working, or studying.

What is the warranty period?

Livarno Lux offers a 2-year warranty against manufacturing defects. Keep your purchase receipt for warranty claims.

How can I contact customer support?

Refer to the manual for contact details or visit the Livarno Lux website. You can also find support through the notice-facile.com platform.

Can I repair the lamp myself?

It is not recommended to open the lamp. Contact authorized service if repair is needed. Opening the device may void the warranty.

USER MANUAL HG00896A Livarno Lux

Exterior view of a modern office building (no signage)

Exterior view of a modern rectangular electronic device with a display screen (no visible text or symbols)

Exterior view of a modern LED streetlight with a square base and three recessed light fixtures (no text or symbols visible)

LÁMPARA LED CON SENSOR LAMPADA LED CON SENSORE

ES

LÁMPARA LED CON SENSOR

LÂMPADA LED COM SENSOR

Operation and Safety Notes

DE

AT

CH

LED-SENSORLEUCHTE

GB / MT Operation and Safety Notes Page 35

=== AAA (solo HG00896A)

6 × 1,5 V

=== AAA (solo HG00896B

y HG00896C)

Description of parts......Page 36

Scope of delivery....Page 37

Technical data...... Page 37

General safety instructions......Page 38

Battery safety information...... Page 39

Mounting the light Page 40

Setting up the light Page 41

Start of operation ...... Page 41

Replacing batteries ...... Page 41

Cleaning and care......Page 42

Disposal Page 42

Warranty Page 43

LED sensor light

Introduction

We congratulate you on the purchase of your new device. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the unit as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

The product is only intended for use in private households. This product is designed for indoor and outdoor use. The product is not intended for commercial use or for use in other applications.

■ Not suitable for ordinary lighting in household room illumination.

This product is suitable for extreme temperature up to -21 °C.

• Description of parts

1 Battery compartment cover
2 Insulating strip

3	Screws
4	Batteries
5	Battery compartment
6	Mounting screws (only for HG00896A and HG00896B)
7	Dowels (∅ 6 mm) (only for HG00896A and HG00896B)
8	Wall bracket (only for HG00896A and HG00896B)
9	Caps (only for HG00896A and HG00896B)
10	Light
11	Sensor
12	Ground spike (only for HG00896C)

- Scope of delivery

1 LED Sensor light
3 batteries, 1.5 V AAA (only for HG00896A)
6 batteries, 1.5 V AAA (only for HG00896B / HG00896C)
2 dowels (∅ 6 mm) (only for HG00896A / HG00896B)
2 mounting screws (only for HG00896A / HG00896B)
2 caps (only for HG00896A / HG00896B)
1 ground spike (only for HG00896C)
1 instructions for assembly and use

- Technicaldata

Illuminant: 3 LEDs, max. 0.06 W per LED (only for HG00896A)

6 LEDs, max. 0.06 W per LED (only for HG00896B)

6 LEDs, max. 0.06 W per LED (only for HG00896C) (LEDs non re-placeable)

Detection range: approx. 3 m

Detection angle: approx. 80^-100^

Light on time: approx. 45 s

Battery: 3 x 1.5 V

..., AAA (only for HG00896A)

6 x 1.5 V..., AAA (only for HG00896B /

HG00896C)

Protection class: IP54 (splashproof)

General safety instructions

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Electrostatic discharges may cause malfunctions. In the event of such malfunctions, remove the batteries briefly and reinsert them.

CAUTION! RISK OF INJURY! Please do not use this device if you find that it is damaged in any way.

■ Never cover the LED night light when it is in operation.

This article does not contain any parts that need to be maintained by the user. The LED cannot be replaced.

■ The illuminant is not replaceable.

If the illuminant fails at the end of its life, the entire light must be replaced.
Never open one of the items of electrical equipment or insert any objects into them.

Battery safety information

WARNING!

DANGER TO LIFE! Batteries are not intended for children. If accidentally swallowed seek immediate medical attention.

EXPLOSION HAZARD! Never recharge

non-rechargeable batteries, short-circuit and / or open batteries.

■ Never throw batteries into fire or water.
- Do not exert mechanical loads to batteries.

Risk of battery leakage

In the event of a battery leak, immediately remove it from the device to prevent damage.
- Avoid contact with the skin, eyes and mucous membranes. In the event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek immediate medical attention.
■ Only use the same type of batteries. Do not mix used and new batteries.
■ Remove the batteries if the appliance has not been used for a long period.

Risk of equipment damage

■ Only use the specified battery type!
- When inserting the battery ensure the correct polarity! This is shown in the battery compartment.
If necessary, clean the batteries and device contacts before inserting batteries.
■ Promptly remove drained batteries from the product.

- Mounting the light

Note: Before first use remove the insulation strip 2 See "Replacing batteries" and Fig. A.

For HG00896A and HG00896B only (see Fig. B):

Note: You will need an electric drill to install the light.

CAUTION! RISK OF INJURY! Refer to the operating instructions for your electric drill.

CAUTION! Ensure that you do not damage any cables in the wall.

For HG00896A only: Remove the wall bracket from the back of the product by sliding to the side.
☐ Use the slotted holes of the wall bracket 8 intended for the mounting screws 6 to mark the holes for drilling.
□ Now drill the mounting holes.
☐ Insert the dowels 7 into the drilled holes.
☐ Fix the wall bracket 8 using the included mounting screws 6.
□ Press the caps 9 on the screws.
☐ For HG00896A only: Fit the light 10 onto the wall bracket 8. Ensure that the light is correctly seated.
□ Your light is now ready for use.

- Setting up the light

For HG00896C only (see Fig. B):

☐ Insert the ground stake 12 to the light 10. Ensure the light is correctly seated.
☐ Your light is now ready for use.
☐ Insert the light far enough into the ground (lawn, flower bed) for it to be stable.
☐ Make sure you keep proper footing and balance at all times. Do not use any force when assembling or setting-up the product, e.g. hammer blows. This will damage the product.

- Start of operation

☐ The light will automatically switch on when motion is detected in a dark environment.

☐ The light will automatically switch off when motion is no longer detected for a period of time.

● Replacing batteries (see Fig. A)

☐ Open the battery compartment 5 on the back side of the light by loosening the screws 3 anti-clockwise.

☐ Open the battery compartment cover 1. Note: Remove the insulating strips 2 before first usage.

☐ Insert the batteries 4. Only use batteries of the specified type (see "Technical data").

Note: When inserting the battery 4 ensure the correct polarity! This is indicated in the battery compartment 5

☐ Close the battery compartment 5 again with the battery compartment cover 1 and fix the cover by screwing on the screws 3 clockwise.

- Cleaning and care

Only a dry, lint-free cloth should be used for cleaning.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries must be recycled in accordance with Directive 2006 / 66 / EC and its amendments. Please return the batteries and / or the device to the available collection points.

Environmental damage through incorrect disposal of the batteries!

Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries at a local collection point.

- Warranty

The device has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this device is 3 years from the date of purchase. Should this device show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the device has been damaged or improperly used or maintained.

The warranty applies to faults in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE IP54