DS-TPE104 - Système de contrôle d'accès de sécurité Hikvision - Free user manual and instructions
Find the device manual for free DS-TPE104 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Access Control System |
| Brand | Hikvision |
| Model | DS-TPE104 |
| Dimensions (L x H x D) | 120 x 80 x 25 mm |
| Weight | 200 g |
| Power Supply | 12 VDC / PoE (IEEE 802.3af) |
| Power Consumption | ≤ 5 W |
| Reader Type | RFID 13.56 MHz (Mifare) |
| Read Range | Up to 5 cm |
| Communication Interface | RS-485, TCP/IP (RJ45) |
| Number of Users | Up to 10,000 |
| Number of Storage Events | Up to 100,000 |
| Operating Temperature | -20 °C to 60 °C |
| Protection Rating | IP65 |
| Housing Material | Zamak / ABS |
| Main Functions | Badge access control, user management, access schedules, anti-tamper alarm |
| Maintenance and Cleaning | Clean with a soft dry cloth; do not use abrasive products |
| Security | Communication encryption, protection against electrostatic discharge |
| Spare Parts and Repairability | Repair by an approved professional; parts available on request |
| General Information | Manual available in multiple languages at notice-facile.com |
Frequently Asked Questions - DS-TPE104 Hikvision
How to connect the DS-TPE104 to the network?
Connect the RJ45 cable to the PoE port to benefit from power and communication via a single cable, or use a separate 12 VDC power supply.
What types of badges are compatible?
This reader supports RFID 13.56 MHz badges in Mifare format (Classic, Plus, Ultralight).
How to add a new user?
Using the provided management software, log in to the controller's web interface, then add the badge by presenting it to the reader or entering its number manually.
What to do if the device stops responding?
Check the power supply and network connection. If the problem persists, perform a hardware reset by holding the reset button for 5 seconds.
Can passwords be used instead of badges?
Yes, the device allows PIN code entry via the built-in keypad. PIN codes can be combined with a badge for enhanced security.
What is the badge reading range?
The maximum range is approximately 5 cm, depending on badge quality and environment.
Is the device weather-resistant?
Yes, the IP65 protection rating ensures protection against dust and water jets, allowing outdoor installation.
How to reset the administrator password?
Contact Hikvision technical support. A hardware reset may erase all settings, including the password.
Where to download the full manual?
The PDF manual is available for free on notice-facile.com in multiple languages.
Can the DS-TPE104 control a door?
Yes, it can control an electric strike or other actuator via a relay output. Configuration is done in the software.
User questions about DS-TPE104 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Système de contrôle d'accès de sécurité in PDF format for free! Find your manual DS-TPE104 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-TPE104 by Hikvision.