IronFlow TINF2600 011 - Iron HOOVER - Free user manual and instructions
Find the device manual for free IronFlow TINF2600 011 HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Iron |
| Brand | Hoover |
| Model | IronFlow TINF2600 011 |
| Dimensions (L x W x H) | 30 x 15 x 15 cm |
| Weight | 1.5 kg |
| Power supply | 220-240 V ~ 50 Hz, 2400 W |
| Water tank capacity | 300 ml |
| Soleplate type | Ceramic |
| Steam function | Continuous: 30 g/min, steam boost: 150 g/min |
| Spray function | Yes |
| Anti-scale system | Integrated scale collector |
| Auto shut-off | Yes, after 30 seconds horizontally or 8 minutes vertically |
| Cord length | 2.5 m |
| Care and cleaning | Clean the soleplate with a damp cloth; empty the tank after use; use the anti-scale system regularly |
| Safety | Auto shut-off, non-slip base, swivel cord |
| Spare parts and repairability | Water tank, soleplate, buttons: available through Hoover after-sales service |
| Warranty | 2 years |
Frequently Asked Questions - IronFlow TINF2600 011 HOOVER
How do I fill the water tank?
Open the tank cap located at the front of the appliance, fill with tap water up to the max level (300 ml), then close. Do not exceed the MAX mark.
Can I use demineralised water?
Yes, you can use a mixture of 50% tap water and 50% demineralised water to extend the life of the appliance. Using exclusively demineralized water may damage the steam system.
How do I activate the steam function?
Press the continuous steam button under the handle for regular steam. For a powerful steam boost, press the steam boost button above the cord guide.
What if steam stops coming out?
Possible cause: empty tank or scale. Fill the tank and use the integrated anti-scale system. If the problem persists, refer to the manual for cleaning the scale collector.
How do I clean the soleplate?
Let the iron cool down. Wipe the soleplate with a slightly damp soft cloth. Do not use abrasive products or scouring pads to avoid scratching the ceramic surface.
Does the auto shut-off work during ironing?
Yes, the appliance automatically turns off after 30 seconds of inactivity horizontally or after 8 minutes vertically. An audible signal sounds before shut-off.
How do I empty the remaining water?
Unplug the appliance and let it cool. Open the filling cap, tilt the iron over the sink and pour out the water. You can also use the steam function to empty the tank.
The cord gets tangled, what should I do?
The swivel cord allows 360° rotation. If it gets tangled, unwind it completely and let it hang freely. Do not pull sharply on the cord.
How do I descale the iron?
Use the anti-scale system: fill the tank with water, set the steam to maximum and iron over a used cloth for several minutes. Then empty the tank and rinse it.
Where can I find spare parts?
Contact Hoover after-sales service or visit the official website. Available parts include the tank, soleplate and control buttons. Keep the model reference TINF2600 011.
User questions about IronFlow TINF2600 011 HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual IronFlow TINF2600 011 - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IronFlow TINF2600 011 by HOOVER.