IronJet TIM2500CA - Iron HOOVER - Free user manual and instructions
Find the device manual for free IronJet TIM2500CA HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Corded steam iron |
| Brand | Hoover |
| Model | IronJet TIM2500CA |
| Power rating | 2500 W |
| Water tank capacity | 300 ml |
| Continuous steam output | 35 g/min |
| Steam boost | 120 g/min |
| Soleplate type | Stainless steel with anti-scratch coating |
| Cord length | 2.5 m |
| Weight | 1.3 kg |
| Dimensions (W x D x H) | 28 x 12 x 15 cm |
| Voltage | 220-240 V AC, 50/60 Hz |
| Auto shut off | Yes, 8 minutes idle |
| Anti-drip system | Yes |
| Anti-scale protection | Built-in anti-scale filter |
| Self-cleaning function | Yes |
| Spray function | Yes |
| Vertical steaming | Yes |
| Water level indicator | Transparent tank with scale |
| Refillable during use | Yes |
| Care and cleaning | Use self-clean function monthly; wipe soleplate with damp cloth when cold |
| Safety | Thermal fuse and automatic shut-off |
| Spare parts availability | Replacement soleplates and filters available via Hoover service centers |
Frequently Asked Questions - IronJet TIM2500CA HOOVER
How do I fill the water tank?
Open the water inlet cover, tilt the iron slightly, and pour water into the tank using a filling cup or bottle, avoiding exceeding the MAX level indicator.
What type of water should I use?
For best performance and longevity, use distilled or demineralised water. Avoid using 100% tap water in hard-water areas to prevent scale build-up.
How do I use the steam boost function?
Press the Steam Boost button firmly to release a powerful shot of steam that helps remove stubborn wrinkles. Wait a few seconds between presses to allow the system to recharge.
How do I clean the soleplate?
Unplug the iron and let it cool down completely. Wipe the soleplate with a damp cloth and a mild detergent if needed. Do not use abrasive pads or chemicals.
Why does my iron leak water?
Leaking can occur if the iron is not hot enough or if the anti-drip valve is clogged. Set the temperature to a higher level and ensure the iron is fully heated before using the steam function.
How does the anti-scale filter work?
The built-in anti-scale filter traps calcium and mineral particles from the water, preventing them from clogging the steam chamber. Clean or replace it periodically as described in the manual.
How do I use the self-cleaning function?
Fill the tank with water to the MAX level, plug in the iron and set it to the highest temperature. When the indicator goes off, unplug the iron, hold it over a sink, and press the Self-Cleaning button to flush out scale and impurities.
How does the auto shut-off feature work?
The iron switches off automatically when left undisturbed for 8 minutes in an upright position or 30 seconds horizontally. Move the iron to restart it.
Can I use the iron vertically to remove wrinkles from hanging clothes?
Yes, the iron supports vertical steaming. Hold the iron upright, press the steam boost button and hover it over the fabric without touching it to remove wrinkles from hanging garments and curtains.
Is the iron cord long enough?
The cord length is 2.5 metres, which provides ample freedom of movement for most ironing tasks. The cord also swivels to prevent tangling.
User questions about IronJet TIM2500CA HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual IronJet TIM2500CA - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IronJet TIM2500CA by HOOVER.