IAN 273675 - Hammock CRIVIT - Free user manual and instructions

Product type	Garden hammock
Brand	Crivit
Model	IAN 273675
Main material	Polycotton (65% polyester, 35% cotton)
Dimensions (unfolded)	200 x 150 cm
Maximum supported weight	150 kg
Hammock weight	1.2 kg
Suspension kit included	Yes (polyester ropes and carabiners)
Length of suspension ropes	2 x 3 m
Number of seats	2 seats
Usage	Indoor and outdoor
Care	Hand wash cold, air dry
UV resistance	Yes, UV treatment
Warranty	2 years
Repairability	Spare parts available on request
Safety standards	Conforms to EN 12309 standard

Frequently Asked Questions - IAN 273675 CRIVIT

What are the dimensions of the Crivit IAN 273675 hammock?

The hammock measures 200 cm long and 150 cm wide when unfolded.

What is the maximum weight supported by this hammock?

The hammock supports up to 150 kg (user weight + equipment).

How to install the hammock?

Use the supplied ropes and carabiners to attach it to two solid points (trees, poles). Make sure the anchor points are about 3 to 4 meters apart.

Is the hammock suitable for outdoor use?

Yes, the hammock is treated against UV and can be used outdoors. However, store it away from weather to extend its lifespan.

How to clean the hammock?

Wash the hammock by hand in cold water with mild detergent. Do not use bleach. Air dry it away from direct sunlight.

Are the suspension ropes included?

Yes, the hammock comes with 2 ropes of 3 meters and 2 carabiners.

Can the hammock be used without the supplied ropes?

Yes, you can use your own straps or ropes, provided they are suitable for the supported weight and do not damage the anchor points.

Is the hammock guaranteed?

Yes, the hammock has a 2-year warranty against manufacturing defects.

Where to find spare parts for this hammock?

Spare parts (ropes, carabiners) can be ordered from Crivit customer service quoting the IAN 273675 number.

Can the hammock be used by a child?

Yes, under adult supervision. Make sure the child does not exceed the maximum weight and that the hammock is installed safely.

USER MANUAL IAN 273675 CRIVIT

WATER HAMMOCK

GB IE

WATER HAMMOCK

Instructions for use

FR BE

HAMAC FLOTTANT

Safety instructions 5

Inflating 5

Empty the air 5

Care, storage 6

Disposal 6

Service 6

FR BE

Congratulations! With your purchase you have decided on a high-quality product. Get to know the product before you start to use it. Carefully read the following instructions for use. Use the product only as described and only for the given areas of application. Keep these instructions safe. When passing the product on to a third party, always make sure that the documentation is included.

Scope of delivery

1 x Water hammock 1 x instructions for use

Technical data

Dimensions (inflated): 167.5 x 79 x 22.5cm (L x W x H) Maximum load: 80kg Maximum pressure: 0.03 bar

Intended use

This product is designed for private use by one person of 80kg maximum weight, and is for use on water. The product is not a swimming aid, or a water toy, or a winter sports article, and is only suitable for swimmers! Not suited for children from ages 0-14.

Used symbols

WARNING!

Please take note of the symbols indicated on the product before using the item.

General warning sign

This is not a buoyancy aid

General prohibition sign

General mandatory sign

First read the instructions for use

Do not use with offshore

Do not use with offshore

Not suitable for children 4 years of age

Number of users: / children 0

Only suitable for at swimmers

Device requires

Highest load

Safe distance to shore: 50m

completely

Inflate all air chambers

Safety instructions

CAUTION!

There is a risk of tipping, drifting or drowning if these instructions are not followed. Uneven distribution of load on the article will cause tipping.

WARNING!

Risk of suffocation for children! Do not allow children to play with the packaging material or the product without supervision.

WARNING! MORTAL DANGER!

Will not protect against drowning!

For swimmers only!

CAUTION!

The air chambers can be pushed below the water surface during ascending.

Due to this reason and as well as due to single-sided loading the product can tilt.

Risk of injury!

• Use the device only for its intended purpose.
• The product may only be used by persons who are familiar with the safety information.
• Please take note of the maximum highest load. Exceeding the weight limit can lead to product damages as well as influence the functions negatively.
• Check the product for damages or wear before each use. The product may only be used while in good order and condition! Do not use the product if visual damages can be seen or are suspected.
• Do not use the product anymore if it can no longer constrain air.

Avoiding damage to the product!

• All inflatable products are sensitive to the cold. The product should thus never be unfolded and inflated at temperatures below 15^ !

• If air pressure increases in direct sunlight, it should be adjusted correspondingly by releasing some of the air.

• Please ensure that the product – particularly when it is inflated – is not brought into contact with stones, gravel or sharp objects and that it does not chafe or rub against anything, as damages to the foil could otherwise occur.

• Only insert suitable pump adapters into the safety valves. Otherwise the valves could become damaged.
• Do not inflate too strongly, as this could cause the welded seams to burst open. Seal the valves tightly after inflating.
• Avoid contact with sharp, hot, pointed or dangerous objects.

Inflating

ATTENTION!

• All air chambers must always be completely inflated!
• Avoid excessively inflating the air chambers as this could cause the welded seams to overstretch or even burst open.
• Do not inflate by mouth. Use standard foot pumps or doubleaction hand pumps with the correct adapters to inflate the product.
• Do not inflate the product with compressors or compressed air bottles. This could damage the product.
  • Make sure that the chambers are equally filled with air one after the other.
• Only inflate the chambers enough such that they are still slightly wavy on the inside after being inflated.

Pump up the air chambers in the following order (figure A):

1 - Head section (1)
2 - Bed section (2)

1. Open the valve closure (1) (figure B).

2. Inflate the air chambers.

3. Close the valve closure and push in the valve with light pressure.

Empty the air

1. Pull the valve out.
2. Pinch the valve shaft (2) (figure B) lightly together so that the air can escape.

Care, storage

Always store this product in a dry, clean and deflated state at room temperature. The valves should always be closed when this product is being stored. Only clean using water or soap water; never use any aggressive cleaning agents. When putting this product away for winter storage, do not place any sharp objects on top of it and do not apply talcum powder.

Disposal

Please dispose of the product and packaging in an environmentally friendly manner, separating different materials for recycling as required! Dispose of this item through an authorised disposal company or through your local waste disposal facilities - ask your local authority for information if further guidance is required. Ensure that you comply with all regulations currently in force.

IAN: 273675

GB Service Great Britain

Tel.: [phone]

(£ 0.10/Min.)

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

You can also find spare parts for your product at: www.delta-sport.com, category Service - Lidl Spare Parts Service

WAARSCHUWING! EVENSGEVAAR!