TL-SL1226 - Switch TP-LINK - Free user manual and instructions

Product Type	Unmanaged Rackmount Switch
Model	TL-SL1226
Brand	TP-Link
Ports	24 x 10/100 Mbps RJ45, 2 x Gigabit Combo (RJ45/SFP)
Switching Capacity	8.8 Gbps
MAC Address Table	8K entries
Jumbo Frame	Up to 9K bytes
Dimensions (W x D x H)	440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in)
Weight	Approximately 2.5 kg (5.5 lbs)
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	Up to 20 W
Installation	Desktop or 19-inch rack mountable
Cooling	Fanless (passive cooling)
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x
Flow Control	802.3x full-duplex, backpressure half-duplex
Auto-MDI/MDIX	Yes
Safety	Do not open; keep away from water; disconnect power before cleaning
Cleaning	Disconnect power, wipe with dry cloth
Spare Parts	No user-serviceable parts; contact TP-Link for service

Frequently Asked Questions - TL-SL1226 TP-LINK

How many ports does the TP-Link TL-SL1226 have?

The TL-SL1226 has 24 10/100 Mbps ports and 2 Gigabit combo ports (RJ45 or SFP), totaling 26 ports.

Can I mount the TL-SL1226 on a rack?

Yes, it comes with rack-mount brackets for installation in a standard 19-inch rack. Desktop installation is also possible with included rubber feet.

Is the TP-Link TL-SL1226 a managed switch?

No, it is an unmanaged switch, meaning it works plug-and-play without configuration.

What is the switching capacity of the TL-SL1226?

The switching capacity is 8.8 Gbps, ensuring non-blocking performance.

Does the TL-SL1226 support jumbo frames?

Yes, it supports jumbo frames up to 9K bytes.

How do I clean the TL-SL1226?

Disconnect the power cord and wipe the exterior with a soft, dry cloth. Do not use liquids or spray cleaners.

What should I do if the switch overheats?

Ensure proper ventilation; the switch is fanless. Keep it in a well-ventilated area away from heat sources.

Can I use the TL-SL1226 with a UPS?

Yes, it supports a standard 100-240 VAC power input, so it can be connected to a UPS for backup power.

What are the LED indicators on the TL-SL1226?

Each port has a link/activity LED; there is also a power LED. The combo ports have separate LEDs for copper and fiber.

Is the TL-SL1226 compliant with RoHS?

Yes, TP-Link products are RoHS compliant, ensuring environmental safety.

USER MANUAL TL-SL1226 TP-LINK

Unmanaged Rackmount Switch

CONTENTS

Deutsch....01

English....04

Español....07

Ελληνικά....10

Français....13

Italiano....16

Português....19

Suomi....22

Nederlands....25

Svenska....28

Norsk....31

Dansk....34

Türkçe....37

Installation

- Tischmontage

- Einschalten

Installation

- Desktop Installation

To install the device on the desktop, please follow the steps below:

1. Set the device on a flat surface strong enough to support the entire weight of the device with all fittings.
2. Remove the adhesive backing papers from the rubber feet.
3. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device.

- Rack Installation

To install the device in a rack, follow the instructions described below:

1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws.

1. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack.

Connection

- Ethernet Port

Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shown.

- Power On

Plug the female connector of the provided power cord into the power socket of the device, and the male connector into a power outlet.

Instalación

- Encender

Εγκατάσταση

Installation

- Pose libre

Installazione

Instalação

Asennus

- Pöytäasennus

Installatie

- Desktop installatie

Installation

- Desktop-installation

Montering

- Skrivebordsmontering

Installation

- Stationær installation

Kurulum

- Masaüstü Kurulumu

Deutsch

Sicherheitsinformation

• When a product has a power on/off button, the power on/off button is one way to turn-off the product. For products without the on/off button, the only way to completely turn-off the product is to disconnect the product or the power adapter from the power source. The disconnected device shall remain readily operable.
• Do not open this product or attempt to service it; it may expose you to dangerous high voltage or other risks. Opening a sealed component or sealed product/s will void the warranty. For product servicing, please contact us.
• Do not operate this product near water.

TP-LINK Limited Product Warranty

For TP-LINK Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-LINK warrants the TP-LINK branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-LINK's guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

Español

South Building(floors 1,3,4,5) and 28(floors 1-4), Central Science & Technology Park, Shennan Rd, Nanshan, Shenzhen, China

Robert-Bosch-Straße 9, 65719 Hofheim am Taunus, Germany

Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RG1 8EW

Marathonodromou 77, Marousi 151 24, Greece

Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.

www.tp-link.com