Archer D9 - Router TP-LINK - Free user manual and instructions

Product Type	Wireless ADSL/VDSL Modem Router
Brand	TP-Link
Model	Archer D9
Wi-Fi Standard	802.11ac (AC1200)
Frequency Bands	2.4 GHz and 5 GHz
Maximum Wireless Data Rate	Up to 300 Mbps (2.4 GHz) + 867 Mbps (5 GHz)
DSL Connectivity	ADSL2+, VDSL2
LAN Ports	4 x 10/100/1000 Ethernet ports
WAN Port	1 x 10/100/1000 Ethernet port (shared LAN4/WAN)
Antennas	3 external antennas
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK, WPS
Advanced Features	Parental Control, QoS, Guest Network, Built-in Firewall
Power Supply	12V / 1.5A power adapter
Dimensions (approx.)	220 x 145 x 35 mm
Weight (approx.)	400 g
Operating Temperature	0 °C to 40 °C
Operating Humidity	10% to 90% non-condensing
Warranty	3 years
Package Contents	Router, power adapter, Ethernet cable, phone cable, quick installation guide
Maintenance	Clean with a dry cloth; avoid moisture and extreme temperatures
Safety	Do not expose to water, do not open, use only the provided adapter

Frequently Asked Questions - Archer D9 TP-LINK

What to do if the authentication page does not appear?

Check that your computer is obtaining an IP address automatically. Type http://tplinkmodem.net correctly in the address bar. Try a different browser or restart the modem router.

What to do if the LED status is not correct?

Check the telephone connections and power supply. Reset the modem router to factory defaults. Remove the DSL filter and connect the modem directly to the phone socket. Contact your ISP if the problem persists.

What to do if I cannot access the Internet?

Ensure the telephone and network cables are properly connected. Log into the web interface and verify the VCI/VPI settings, connection type, username and password with your ISP. Reset and reconfigure the modem if necessary.

How to recover my lost password?

For the admin password, reset the router (Reset button) and create a new password. For the Wi-Fi password, check the label on the bottom of the product or log into the web interface to change it.

How to restore factory default settings on the modem?

Press and hold the RESET button for about 10 seconds until the LEDs flash, then release. You can also do this from the web interface under System Administration.

How to configure the modem in WiFi Router mode?

Connect your computer to the router, open a browser and go to http://tplinkmodem.net. Go to Advanced > Operation Mode and select WiFi Router Mode. Reboot, then connect your existing modem to the WAN/LAN4 port and complete the configuration under Basic > Internet.

How to use the Tether app?

Download the TP-Link Tether app from the App Store or Google Play. Connect your smartphone to the router's Wi-Fi network, open the app and follow the instructions to manage settings, parental controls, and block devices.

What safety instructions should be followed?

Keep the device away from water, fire, and humidity. Do not attempt to disassemble or repair it yourself. Use only the provided power adapter and follow the specified temperature conditions.

Where to find the default Wi-Fi password?

The Wi-Fi password (Wireless Password/PIN) is printed on the label on the bottom of the router. It is also indicated in the quick installation guide provided with the device.

How to update the router firmware?

Log into the router's web interface (http://tplinkmodem.net), go to Advanced > System Tools > Firmware Update. Download the latest version from the TP-Link website, then select the file and start the update. Do not power off during the process.

USER MANUAL Archer D9 TP-LINK

TP-Link Technologies Co., Ltd.

South Building, floors 1-3, 4-5, and 26, floors 1-4, Central Science &

Technology Park, Sherman Ed, Naringen, Shenzhen, Chris

TP-Link US Limited, Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RC1 8FW

TP-Link Italia S.r.l., Via Cobetti 21, 20063 Cenovino e University/Mh

(1) Link hand, 171

TP-Link France SA-II, Baliment Equalist, 18-15 avenue B 765 40 W/line Wilcox-class France

TP-Link Teknologien Tic. Ltd. Şti., Şerlali Mevki, Darbaros Cad. Soyleşi Sokak. Nr:15/2 Kat3/4

TP-Link IBER/A.S.L., Calc Quintanozides 17, S°F. 26050 Madrid, Spain

TP-Link Netherlands B.V., Archimedeksson 28, 3038 M. Nes vanzen

TD Line (Novel AF), For revenue 14, 7p. 13, 121.59 Nourle, Suncor

TP Line Holders Inc., New Yorkshire 73, Moors 151, 26, Coven

TP-Lin, Helix Ltd, Maral-Tomber-Hou 77, March 15; 24, Greece

RWS. 72-Link Portugal, Unpessos, Lde. Avenda da Liberdade, nº245, 7°L, 1250-143 Lisboa, Portugal

TP-Link Technologies Co., Ltd.

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

For technical support, replacement services, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

7106508605 REV13.0

tp-link

Quick Installation Guide

Wireless DSL Modem Router

CONTENTS

1 / Deutsch 6 / English 11 / Español 16 / Ελληνικά 21 / Français 26 / Italiano 31 / Português 36 / Suomi 41 / Nederlands 46 / Svenska 51 / Norsk 56 / Dansk

Hardware Installation

Connect the Hardware

If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection.

* Image may differ from actual product.

4 Wait for 2 minutes. The Power and DSL LEDs will be on and stable. If there is only one LED, it will flash slowly instead.

Note: If the LED status is different, please refer to FAQ > Q2.

Configure via Web Browser

1 Connecting your computer to the modem router via a wired or wireless connection

Wired

Connect your computer to the LAN (or 1/2/3/4) port using an Ethernet cable.

Wireless

Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router.

2 Configuring the modem router via a web browser

A Launch a web browser and type in

http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B Create a password for future login attempts, or use admin for both username and password for some routers.

C Go to Quick Setup or Quick Start page and follow the step-by-step instructions to complete the initial configuration.

Now you can enjoy your internet.

English

Already Have a Modem?

If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below to set it up.

1. Connect your computer to the router (LAN 1/2/3 port) via a wired or wireless connection. Note: The SSIDs (network names) and wireless password are printed on the product label. 2. Configure the modem router via a web browser.

A. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B. Create a password for future login attempts, or use admin for both username and password for some routers.

C. Go to Advanced > Operation Mode page and switch to Wireless Router Mode. Wait until the restart finishes.

3. Connect the modem to the router's LAN4/WAN port via an Ethernet cable.

4. Go to Basic > Internet to finish the setup.

Now you can enjoy your internet. For more advanced settings, refer to the User Guide on TP-Link's official website at www.tp-link.com.

Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage your router. You can block unwelcome devices, set up Parental Controls, configure your wireless settings and more.

Scan the QR code to download the TP-Link Tether app from the Apple App Store or Google Play.

Note: Tether is not supported by some routers. Please check the app description before downloading.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login page does not appear?

A1. If the computer is set to a static or fixed IP address, change the settings to obtain an IP address automatically from the modem router.

A2. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.

A3. Use another web browser and try again.

A4. Reboot your modem router and try again.

A5. Disable and enable the active network adapter.

Q2. What can I do if the LED status is not correct?

A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter.

A2. Restore your modem router to its factory default settings.

A3. Remove the DSL splitter, directly connect the modem router to the phone jack and then reconfigure the modem router by following the instructions in this Quick Installation Guide.

A4. Contact your ISP to verify if the DSL line is in good status.

A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q3. What can I do if I cannot access the internet?

A1. Make sure the telephone and Ethernet cables are plugged in correctly. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net. If you can, try the following answers. If you cannot, change your computer to obtain an IP address automatically from the modem router. A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account username and password are correct. If they are not, replace them with the correct settings and try again. A4. Restore the modem router to its factory default settings and reconfigure the modem router by following the instructions in this Quick Installation Guide. A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q4. What can I do if I forget my password?

- Web management page password:

A. Refer to FAQ > Q5 to reset the router, and then create a password for future login attempts, or use admin for both username and password for some routers.

- Wireless network password:

A1. The default Wireless Password/PIN is printed on the product label of the modem router. A2. If the default wireless password has been changed, log in to the web management page of the router to retrieve or reset your wireless password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on, press and hold down the RESET button of the modem router until there is an obvious change of LEDs, and then release the button. A2. Log in to the web management page of the modem router and go to the system management page to restore the modem router.

For Wi-Fi

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link Three Years Limited Product Warranty

For TP-Link Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in accordance with TP-Link's guidelines for a period of THREE YEARS from the date of original retail purchase by the end-user purchaser.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

https://www.tp-link.com/en/ce.

https://www.tp-link.com/en/ce.