TD-W8980B - Router TP-LINK - Free user manual and instructions

Product Type	ADSL2+ Wi-Fi Modem Router
Brand	TP-Link
Model	TD-W8980B
Dimensions (W x D x H)	200 x 140 x 35 mm
Weight	350 g
Power Supply	12 V DC, 1 A
Power Consumption	12 W (max)
Wireless Technology	Wi-Fi 802.11b/g/n
Frequency Band	2.4 GHz
Max Wi-Fi Data Rate	300 Mbps
Number of Antennas	2 (internal)
LAN Ports	4 x RJ-45 10/100 Mbps
WAN Port	1 x RJ-45 (shared with LAN4)
ADSL Port	1 x RJ-11
Phone Port	1 x RJ-11 for phone
ADSL Protocols	ADSL2/2+
Parental Controls	Yes (parental control)
Mobile App	Tether (iOS and Android)
Security Settings	WPA/WPA2, WEP, built-in firewall
Reset	RESET button on the back
Operating Temperature	0 °C to 40 °C
Operating Humidity	10% to 90% (non-condensing)
Maintenance	Wipe with a soft, dry cloth. Do not use chemicals.
Warranty	3 years

Frequently Asked Questions - TD-W8980B TP-LINK

What to do if the administration page does not appear?

Check that you are typing http://tplinkmodem.net or 192.168.1.1 correctly. Make sure your computer is set to obtain an IP address automatically. Try another web browser or disable/re-enable the network adapter.

What to do if the DSL LED does not light up correctly?

Check the telephone connections and power supply. Try connecting the modem directly to the phone jack without a DSL filter. If the problem persists, contact your ISP or TP-Link technical support.

What to do if I have no Internet access?

Check the telephone and Ethernet cables. Log in to the administration interface and ensure the VCI/VPI (or VLAN) settings, connection type, username, and password provided by your ISP are correct. Try restoring factory defaults.

What to do if I forgot the administration password?

Restore factory defaults by holding the RESET button for about 10 seconds. Then use admin as the username and password (or create a new password on first login).

How to restore factory defaults?

Hold the RESET button on the back of the router for about 10 seconds until the LEDs flash. Release the button. You can also do it via the administration interface under System Administration.

How to change the Wi-Fi password?

Log in to the administration interface, go to Wireless > Security or Wi-Fi, and change the password. Remember to click Save.

How to configure parental controls?

Access the administration interface, then the Parental Controls section. You can block sites or limit access to certain devices according to schedules.

How to update the firmware?

Download the latest firmware from www.tp-link.com. Log in to the administration interface, go to System Administration > Firmware Update, select the file, and click Update. Do not turn off the power during the operation.

How to use the Tether app?

Download the Tether app from the App Store or Google Play. Connect to your router via the app (with the same password as the web interface). You can manage devices, Wi-Fi, parental controls, etc.

What to do if the Wi-Fi connection is unstable?

Try changing the Wi-Fi channel in the administration interface (Wireless > Settings). Move the router away from sources of interference (microwaves, cordless phones). Update the firmware if necessary.

USER MANUAL TD-W8980B TP-LINK

TP-Link Technologies Co., Ltd. South Building, floors 1, 3, 4, 5, and 6, floors 1-6, Central Science & Engineering Data Engineering Development Charter Office

Technology Park, Shenzhen Rd, North Law, Shenzhen, China

TP-116 Deutschland Green Roof-Electro-Silica 3, 65/19 Holzern am Thurs. Germany

TP Link US Limited Unit 2 & 3 Roverview (142-144), Cardiff Road, Reading, RGT 8P9

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

For technical support, replacement services, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

7106508605 REV13.0

tp-link

Quick Installation Guide

Wireless DSL Modem Router

CONTENTS

1 / Deutsch 6 / English 11 / Español 16 / Ελληνικά 21 / Français 26 / Italiano 31 / Português 36 / Suomi 41 / Nederlands 46 / Svenska 51 / Norsk 56 / Dansk

Hardware Installation

Connect the Hardware

If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection.

* Image may differ from actual product.

4 Wait for 2 minutes. The Power and DSL LEDs will be on and stable. If there is only one LED, it will flash slowly instead.

Note: If the LED status is different, please refer to FAQ > Q2.

Configure via Web Browser

1 Connecting your computer to the modem router via a wired or wireless connection

Wired

Connect your computer to the LAN (or 1/2/3/4) port using an Ethernet cable.

Wireless

Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router.

2 Configuring the modem router via a web browser

A Launch a web browser and type in

http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B Create a password for future login attempts, or use admin for both username and password for some routers.

Go to the Quick Setup or Quick Start page and follow the step-by-step instructions to complete the initial configuration.

Now you can enjoy your internet.

Already Have a Modem?

If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below to set it up.

1. Connect your computer to the router (LAN 1/2/3 port) via a wired or wireless connection. Note: The SSIDs (network names) and wireless password are printed on the product label. 2. Configure the modem router via a web browser.

A. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B. Create a password for future login attempts, or use admin for both username and password for some routers.

C. Go to Advanced > Operation Mode page and switch to Wireless Router Mode. Wait until the restart finishes.

3. Connect the modem to the router's LAN4/WAN port via an Ethernet cable.

4. Go to Basic > Internet to finish the setup.

Now you can enjoy your internet. For more advanced settings, refer to the User Guide on TP-Link's official website at www.tp-link.com.

Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage your router. You can block unwelcome devices, set up Parental Controls, configure your wireless settings and more.

Scan the QR code to download the TP-Link Tether app from the Apple App Store or Google Play.

Note: Tether is not supported by some routers. Please check the app description before downloading.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login page does not appear?

A1. If the computer is set to a static or fixed IP address, change the settings to obtain an IP address automatically from the modem router.

A2. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.

A3. Use another web browser and try again.

A4. Reboot your modem router and try again.

A5. Disable and enable the active network adapter.

Q2. What can I do if the LED status is not correct?

A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter.

A2. Restore your modem router to its factory default settings.

A3. Remove the DSL splitter, directly connect the modem router to the phone jack and then reconfigure the modem router by following the instructions in this Quick Installation Guide.

A4. Contact your ISP to verify if the DSL line is in good status.

A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

English

Q3. What can I do if I cannot access the internet?

A1. Make sure the telephone and Ethernet cables are plugged in correctly. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net. If you can, try the following answers. If you cannot, change your computer to obtain an IP address automatically from the modem router. A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account username and password are correct. If they are not, replace them with the correct settings and try again. A4. Restore the modem router to its factory default settings and reconfigure the modem router by following the instructions in this Quick Installation Guide. A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q4. What can I do if I forget my password?

- Web management page password:

A. Refer to FAQ > Q5 to reset the router, and then create a password for future login attempts, or use admin for both username and password for some routers.

- Wireless network password:

A1. The default Wireless Password/PIN is printed on the product label of the modem router. A2. If the default wireless password has been changed, log in to the web management page of the router to retrieve or reset your wireless password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on, press and hold down the RESET button of the modem router until there is an obvious change of LEDs, and then release the button. A2. Log in to the web management page of the modem router and go to the system management page to restore the modem router.

For Wi-Fi

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link Three Years Limited Product Warranty

For TP-Link Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link's guidelines for a period of THREE YEARS form the date of original retail purchase by the end-user purchaser.

Spanish

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Greek