GT371 - Hedge trimmers BLACK & DECKER - Free user manual and instructions
Find the device manual for free GT371 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric hedge trimmer |
| Brand | Black & Decker |
| Model | GT371 |
| Power source | Corded electric |
| Power | 450 W |
| Blade length | 51 cm (20 inches) |
| Tooth spacing | 22 mm |
| Cutting capacity | Up to 22 mm diameter |
| Cutting speed | 3300 strokes/min |
| Weight | 3.2 kg |
| Dimensions (L x W x H) | 60 x 20 x 15 cm |
| Handle type | Ergonomic front handle with trigger |
| User protection | Blade guard and two-hand safety switch |
| Main functions | Precise cutting of hedges, shrubs and bushes |
| Maintenance and cleaning | Clean blades after use, oil regularly |
| Spare parts and repairability | Blades and handles available from after-sales service |
| Warranty | 2 years |
| General information | Instruction manual included, follow safety instructions |
Frequently Asked Questions - GT371 BLACK & DECKER
What is the power of the Black & Decker GT371 hedge trimmer?
The Black & Decker GT371 has a power of 450 W, sufficient to cut branches up to 22 mm in diameter.
Is the blade reversible?
Yes, the steel blade of the GT371 is double-action and can be used on both sides for better maneuverability.
How to maintain the GT371 hedge trimmer?
Clean the blades after each use and apply light oil to prevent rust. Check the fastenings regularly.
Can I use the GT371 with an extension cord?
Yes, use an outdoor extension cord of appropriate gauge (H05RN-F 3G1.5 mm² minimum) and ensure it is unrolled.
Does the hedge trimmer have a safety device?
Yes, it is equipped with a two-hand switch: you must press the front and rear triggers simultaneously to start.
What is the blade length?
The blade measures 51 cm (20 inches), allowing you to cover a large area in a single pass.
Is the GT371 suitable for trimming thick hedges?
It can cut branches up to 22 mm thick. For larger branches, use pruning shears first.
Where can I find spare parts for the GT371?
Blades and handles are available from authorized Black & Decker dealers or on their website. Use the references indicated in the manual.
The hedge trimmer is very noisy, is this normal?
With 3300 strokes/min, a noise level of about 90 dB(A) is normal. Always wear ear protection.
How to sharpen the blade of the GT371?
It is recommended to have the blade sharpened by a professional or use a special file. However, for domestic use, replacement is often simpler.
User questions about GT371 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hedge trimmers in PDF format for free! Find your manual GT371 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GT371 by BLACK & DECKER.