KS227 - Service après-vente BLACK & DECKER - Free user manual and instructions
Find the device manual for free KS227 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Jigsaw |
| Brand | Black & Decker |
| Model | KS227 |
| Power supply | 230 V, 50 Hz, 500 W |
| No-load speed | 0-3000 strokes/min |
| Blade stroke | 19 mm |
| Cutting capacity in wood | Up to 65 mm |
| Cutting capacity in steel | Up to 5 mm |
| Bevel angle | 0° to 45° (adjustable) |
| Dimensions (L x W x H) | 260 x 80 x 200 mm |
| Weight | 1.8 kg |
| Protection class | Class II (double insulation) |
| Main functions | Straight, curved and bevel cutting |
| Maintenance and cleaning | Clean with a dry cloth; regular lubrication |
| Safety | Trigger lock, overload protection |
| Spare parts and repairability | Blades, base plate, guide, carbon brushes available |
| General information | Delivered with blade, parallel guide, instruction manual |
Frequently Asked Questions - KS227 BLACK & DECKER
How to change the blade of the jigsaw KS227?
Unplug the tool, then use the supplied Allen key to loosen the blade fixing screw. Remove the old blade and insert the new one, ensuring the teeth are facing forward. Tighten the screw and check that the blade is securely held.
What is the maximum cutting depth in wood?
The maximum cutting depth in wood is 65 mm for straight cuts and 50 mm for 45° cuts.
Can I use the KS227 to cut metal?
Yes, with a suitable blade. The cutting capacity in steel is up to 5 mm. Use a fine-tooth blade and a reduced speed.
How to set the bevel cutting angle?
Loosen the adjustment knob located under the base plate, tilt the base plate to the desired angle (up to 45°), then retighten the knob. Use the graduation mark for precise adjustment.
What does the variable speed control do?
The variable speed control allows adapting the cutting speed to the material: slow speed for metal or plastic, fast speed for wood. This improves cut quality and extends blade life.
How to clean the jigsaw after use?
Unplug the tool and wipe it with a dry, clean cloth. Never use abrasive products or solvents. For stubborn residue, you can use a soft brush.
What to do if the blade jams during cutting?
Immediately release the trigger. Check that the blade is not bent or dull. Ensure the material is properly secured and you are not forcing the tool. If the problem persists, contact customer service.
Where can I buy spare parts for the KS227 model?
Spare parts such as blades, carbon brushes, base plate and parallel guide are available from Black & Decker authorized dealers or on the official website. Always use original parts.
How to replace the carbon brushes?
Unplug the tool. Remove the caps from the brush holders located on each side of the motor. Extract the worn brushes and insert new ones in the correct orientation. Replace the caps. Perform this operation every 100 to 150 hours of use.
Why won't my saw start?
Check the plug and power cord. Ensure the trigger is not locked and the lock button is disengaged. If the problem persists, contact Black & Decker customer service.
User questions about KS227 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Service après-vente in PDF format for free! Find your manual KS227 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KS227 by BLACK & DECKER.