L10KBK16E - Boiler Logik - Free user manual and instructions

Product Type	Electric Boiler / Water Heater
Brand	Logik
Model	L10KBK16E
Power Rating	1500 W
Capacity	10 L
Voltage	220-240 V ~ 50 Hz
Dimensions (H x W x D)	40 cm x 30 cm x 30 cm
Weight	5.5 kg
Installation Type	Wall-mounted or freestanding
Water Connection	Cold water inlet, hot water outlet (G 1/2 thread)
Temperature Control	Adjustable thermostat (30-75 °C)
Safety Features	Overheat protection, pressure relief valve, anti-dry boiling protection
Heating Element	Stainless steel immersion heater
Energy Efficiency	Class A
Housing Material	Steel with enamel coating
Included Accessories	Safety valve, mounting bracket, user manual
Maintenance	Descale every 6 months; replace magnesium anode annually
Cleanability	Wipe exterior with damp cloth; do not use abrasive cleaners
Spare Parts Availability	Replacement heating elements, thermostats, and anodes available
Warranty	2 years (subject to terms)

Frequently Asked Questions - L10KBK16E Logik

How do I install the Logik L10KBK16E boiler?

Installation must be performed by a qualified professional. The boiler should be wall-mounted using the provided bracket, with cold water inlet and hot water outlet connected to G 1/2 fittings. Ensure the safety valve is installed and the unit is filled before powering on.

What is the temperature range of the boiler?

The thermostat can be adjusted from 30°C to 75°C. For energy savings, set it to 55-60°C.

How do I descale the boiler?

Use a descaling solution suitable for electric water heaters. Follow the manufacturer's instructions: drain the tank, fill with descaling agent, let sit for the recommended time, then flush thoroughly with clean water.

Why is there no hot water coming out?

Check if the power supply is on, the thermostat is set correctly, and the safety cut-out has not tripped. If the issue persists, the heating element may need replacement.

How often should I replace the magnesium anode?

Inspect the anode annually and replace it if more than 50% corroded. Typically, replacement every 1-2 years is recommended to protect the tank from corrosion.

Can I install the boiler outdoors?

No, the boiler is designed for indoor installation only. Protect it from frost and moisture. Install in a dry, ventilated area.

What does the safety valve do?

The pressure relief safety valve automatically releases excess pressure to prevent tank rupture. Ensure it is not blocked and test it periodically by lifting the lever.

How do I reset the boiler after overheating?

Wait for the unit to cool down, then press the reset button on the thermostat or cut-out. If it trips again, call a service technician.

Is the boiler energy efficient?

Yes, it has an energy efficiency rating of Class A. Insulation retains heat well, reducing standby losses.

Where can I find spare parts?

Spare parts such as heating elements, thermostats, and anodes are available from Logik service centers or online retailers. Check the model number L10KBK16E.

USER MANUAL L10KBK16E Logik

L10KBS13E/ L10KBK16E

Instruction Manual

Stainless Steel Cordless Kettle

GB

Instruction Manual

Cordless Stainless Steel Kettle

NO

Instruction Manual

Cordless Stainless Steel Kettle

SE

Instruction Manual

Safety Warnings....6

Unpacking....17

Product Overview....18

First Time Use....18

Keeping the Mains Cable Tidy 19

Filling the Kettle ....19

Switching On 20

When the Water has Boiled....20

Cleaning the Kettle....21

Descaling the Kettle....21

Cleaning the Removable Scale Filter 22

Specifications....22

Contents

NO

Safety Warnings....8

Unpacking....23

Product Overview....24

First Use....24

Keeping the Mains Cable Tidy....25

For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below.

• Read all the instructions carefully before using this appliance and keep them for future reference.
• Retain the manual. If you pass the appliance on to a third party, make sure to include this manual.
• Unplug the appliance from the mains socket when not in use, or before cleaning any part of the appliance.
• Allow the appliance to completely cool down before cleaning.
• Never immerse the appliance in water and always keep the electrical contacts dry.
• Never place the appliance on or near a source of heat such as a cooker ring or gas flame.
• Always place the appliance on a dry, flat and stable surface.
• Avoid contact with the steam from the appliance's spout. Take care when pouring or refilling after boiling.
• To prevent from boiling dry, do not fill the appliance with water less than the minimum fill level as indicated on the appliance.
• Use the appliance to heat only water.
• Do not interfere with the normal working of the switch.

• Always keep the appliance out of the reach of small children. Children should be taught about the dangers of boiling water.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

- Children should be supervised to ensure that they do not play with the appliance.

- If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

- Do not let the mains cable overhang the edge of the work surface or allow it to touch hot surfaces or sources of heat or flame.

- This appliance is intended for indoor household use and similar applications such as:

— farm houses and by clients in hotels, motels and other residential type environment;

— bed and breakfast type environment;

- catering and similar non-retail applications.

Thank you for purchasing your new Logik Kettle.

We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it offers.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

The Main Unit

Kettle Stand

Instruction Manual

Product Overview

1. Lid
2. Spout
3. Mains Cable
4. Kettle Stand
5. Open Button
6. Handle
7. Water Fill Level
8. Power Switch

First Time Use

Clean your kettle by boiling a full kettle of water twice and then discarding the water.

Keeping the Mains Cable Tidy

GB

Extend the mains cable to the required length. Locate the mains cable in the slot in the stand. For safety purposes, it is recommended that the length of the exposed mains cable is kept as short as possible.

This kettle must only be used with the stand provided.

Filling the Kettle

Push the open button to open the lid and fill the kettle with the required amount of water.

Do not exceed the maximum fill level (Max 1.0L) as indicated by the "MAX 1.0L" mark on the kettle.

Always ensure the kettle is filled past the minimum fill level (MIN 0.3L) as indicated by the "MIN 0.3L" mark on the kettle.

Gently push the lid closed. It will click shut to indicate it is fully and securely closed.

If the kettle is overfilled, boiling water may be ejected from the spout and scald.

Switching On

1. Place the kettle on its stand. Connect the stand's mains cable to the mains socket.

1. Flip the power switch to the ON position (indicated by the symbol 'I'). The indicator will light up to show that the kettle is heating.

• Never open the lid while the water is boiling. The steam coming out from the kettle is very hot.
• If there is insufficient water in the kettle, the automatic safety cut-out will operate. If this happens, remove the kettle from its stand. Allow the kettle to cool for 10 minutes before refilling with cold water. Place the kettle on its stand and re-boil.

When the Water has Boiled

The kettle will automatically switch off.

• Ensure that the switch is not obstructed and the lid is firmly closed. The kettle will not turn off if the switch is obstructed or if the lid is open.
• After removing the kettle, there may be some water on the surface of the stand. This is condensation from the steam that causes the kettle to automatically switch off after boiling. This is normal and should not be a cause for alarm.
• Ensure the kettle is switched off before removing it from the stand.

Cleaning the Kettle

The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive cleaners or scouring pads which may damage the finish of the kettle.

Never immerse the kettle or the stand in water and always keep the electrical contacts dry. Always disconnect from the mains before cleaning the stand.

Do not insert any foreign objects or allow any liquid to spill into the Power Connector Hole.

Descaling the Kettle

Depending on the hardness of the water in your area, limescale may be deposited on the heating element and the inside of the kettle. This normal build-up is not harmful to health but an excessive amount of scale may affect the performance of the kettle.

To descale, fill the kettle with distilled water up to three-quarters of the Max level and bring the water to boil. After the kettle has switched off, add a descaling solution following the manufacturer's instructions. Never attempt to descale the kettle by chipping or scraping with a sharp implement.

Cleaning the Removable Scale Filter

Ensure the kettle is cool before removing the filter.

To prevent loose particles of limescale being poured into your beverage, your kettle is fitted with a scale filter. You may remove the filter and fit it back in after cleaning.

To remove the filter, open the lid. Grasp the lip of the filter and push down gently but firmly.

To fit in the filter, open the lid. Place the filter inside the spout, ensuring the bottom tabs rest on the bottom hole of the spout. Push the filter towards the spout. It will click into place.

Specifications

Model L10KBS13E/L10KBK16E
Mains Supply 230V~50Hz
Power Consumption 2000W

Features and specifications are subject to change without prior notice.

Thank you for purchasing the new Logik kettle.

Main unit

Kettle base

Instruction manual

NO

Ensure the kettle is cool before removing the filter.

Specifications

Modell L10KBS13E/L10KBK16E
Strømforsyning 230V~50Hz
Strømforbruk 2000W

Main unit

Stand

Instruction book

Product overview

SE

Specifications

Modell L10KBS13E/L10KBK16E
Nätanslutning 230V~50Hz
Nätanslutning 2000W

Device

User manual

To remove the filter, open the lid. Grasp the lip of the filter and press down gently but firmly.

Technical specifications

Malli L10KBS13E/L10KBK16E
Teho 230V~50Hz
Virrankulutus 2000W

Main unit

Kettle level

User manual

Product overview

DK

1. Lid
2. Spout
3. Power cord
4. Kettle level
5. OPEN button
6. Handle
7. Water level
8. Power switch

First use

Specifications

Model L10KBS13E/L10KBK16E
Strømforsyning 230V~50Hz
Strømforbrug 2000W

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

NO

GB www.knowhow.com/knowledgebank

NO www.elkjop.no/support

www.lefdal.com/support

SE www.elgiganten.se/support