LCH665SSE - Range hood Logik - Free user manual and instructions
Find the device manual for free LCH665SSE Logik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Chimney Cooker Hood |
| Brand | Logik |
| Model | LCH665SSE |
| Installation Type | Wall-mounted chimney hood |
| Width | 65 cm |
| Finish | Stainless steel |
| Number of Speeds | 3 |
| Control Type | Push buttons |
| Maximum Extraction Rate | 420 m³/h |
| Noise Level | 65 dB(A) |
| Light Bulbs | 2 x LED bulbs (1.5 W each) |
| Grease Filters | 2 x washable aluminium filters |
| Mode | Ducted (extraction) or recirculating (with charcoal filter, not included) |
| Exhaust Outlet | 150 mm |
| Dimensions (H x W x D) | 76.5 x 65 x 50 cm (adjustable flue) |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 220 W |
| Safety Certification | CE approved |
| Cleaning | Dishwasher-safe filters |
| Spare Parts | Available (filters, bulbs, charcoal filters) |
Frequently Asked Questions - LCH665SSE Logik
How do I install the Logik LCH665SSE range hood?
Installation is straightforward if you follow the manual. Fix the mounting bracket to the wall at the recommended height, hang the hood, and connect to a 150 mm duct if extracting externally. Secure the chimney flue adjustably. Ensure the power is off before wiring. For full steps, consult the installation guide.
How do I clean the grease filters?
Remove the filters by pressing the release clips and pulling them out. Wash with warm soapy water or put them in the dishwasher at a low temperature. Dry thoroughly before refitting. Do not use abrasive cleaners. We recommend cleaning every 3-4 weeks depending on use.
Can I use the hood in recirculation mode?
Yes. Install two charcoal filters (not supplied) over the grease filters. This allows the air to be filtered and recirculated into the room. Suitable for installations without external ducting.
What is the extraction rate?
The maximum airflow is 420 m³/h, which is ideal for kitchens up to about 20 m². This is measured at the highest speed.
How do I replace the LED bulbs?
Switch off the power. Pull the lamp holder gently and twist the LED module counterclockwise. Replace with an equivalent 1.5 W LED module and push back. If unsure, contact a qualified technician.
What are the dimensions of this cooker hood?
The main body is 65 cm wide, 50 cm deep and the height can be adjusted from 76.5 cm to 110 cm via the telescopic chimney. Verify your ceiling height before installation.
How many speeds does it have?
It offers 3 speed settings, controlled by push buttons. Choose a low speed for simmering and a high speed for strong fumes or after cooking.
Does the hood come with charcoal filters?
No, charcoal filters are sold separately. The hood is supplied with aluminium grease filters. If used in recirculation mode, you must purchase two charcoal filters (part code LCF15).
What is the ducting size?
The exhaust outlet is 150 mm. Use a rigid or flexible duct of the same diameter for best performance. Keep the duct short and straight to maximise airflow.
How do I operate the controls?
The control panel has 3 speed buttons and a light button. Press the desired speed to switch on the motor; press again to switch off. The light button toggles the LED lamps. Check that the filters are correctly installed before use.
User questions about LCH665SSE Logik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual LCH665SSE - Logik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCH665SSE by Logik.
USER MANUAL LCH665SSE Logik
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Logik
Model : LCH665SSE
Category : Range hood