Power Split 370 H - Brush cutter Texas - Free user manual and instructions
Find the device manual for free Power Split 370 H Texas in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Brush cutter |
| Brand | Texas |
| Model | Power Split 370 H |
| Engine Displacement | 37 cc |
| Power Source | Petrol (2-stroke) |
| Fuel Mix Ratio | 50:1 (petrol:2-stroke oil) |
| Cutting Width | Approx. 40 cm |
| Cutting Head Type | Nylon line head (also compatible with metal blade) |
| Shaft Type | Split shaft (Power Split system) |
| Handle Type | Bicycle handle with soft grip |
| Weight | Approx. 5.5 kg (without fuel and attachments) |
| Dimensions (L x W x H) | Approx. 180 x 25 x 30 cm |
| Fuel Tank Capacity | 0.5 L |
| Safety Features | Protective guard, anti-vibration system, throttle lock |
| Maintenance | Clean air filter regularly; sharpen or replace blade; check spark plug |
| Spare Parts Availability | Common parts available online or through dealers |
| Repairability | User-serviceable with basic tools; professional service recommended for engine |
| Included Accessories | Nylon line head, blade guard, shoulder strap |
Frequently Asked Questions - Power Split 370 H Texas
What fuel mixture does the Power Split 370 H require?
Use a 50:1 ratio of unleaded petrol to high-quality 2-stroke engine oil. Mix thoroughly before fueling.
How do I start the brush cutter?
1. Press the primer bulb 5-6 times. 2. Set the choke to 'cold start'. 3. Pull the starter cord firmly until the engine fires, then open choke. 4. Idle for a few seconds before use.
Can I use a metal blade instead of nylon line?
Yes, the Power Split 370 H is compatible with a metal blade. Ensure you use the correct guard and follow safety instructions in the manual.
How do I replace the nylon cutting line?
1. Stop the engine and disconnect the spark plug. 2. Remove the spool cover. 3. Replace the spool or wind new line (2.4 mm diameter). 4. Reassemble and advance line by tapping the head on the ground.
What is the 'Power Split' feature?
The Power Split system allows the shaft to be separated into two parts for easier storage and transport. Simply align the coupling and twist to lock.
Why does my brush cutter vibrate excessively?
Excessive vibration may indicate a loose blade, damaged cutting head, or worn engine mounts. Check all fastenings and replace damaged parts. Use anti-vibration gloves.
How often should I clean the air filter?
Clean the air filter after every 10 hours of operation. Remove the cover, wash the filter in warm soapy water, dry thoroughly, and re-oil lightly before reinstallation.
What safety gear should I wear?
Always wear safety glasses, hearing protection, sturdy boots, long trousers, and gloves. Use a shoulder strap for better control. Never operate without the guard.
Can I use ethanol-blended petrol?
It is recommended to use fuel with a maximum ethanol content of 10% (E10). Higher ethanol blends can damage the engine. For long-term storage, drain the fuel system.
Where can I find spare parts?
Spare parts are available from Texas dealers, online retailers, or through the manufacturer's website. Common parts include spools, blades, and air filters.
User questions about Power Split 370 H Texas
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Brush cutter in PDF format for free! Find your manual Power Split 370 H - Texas and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Power Split 370 H by Texas.
