Sensor 2.0 - Bike computer TREK - Free user manual and instructions
Find the device manual for free Sensor 2.0 TREK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bike Computer |
| Brand | Trek |
| Model | Sensor 2.0 |
| Dimensions (H x W x D) | 5.0 x 3.5 x 2.0 cm |
| Weight | 28 g |
| Display Type | LCD |
| Power Source | CR2032 coin cell battery |
| Battery Life | Approximately 12 months (typical use) |
| Speed Measurement | Wired or wireless sensor compatible |
| Distance Measurement | Odometer and trip distance |
| Time Functions | Clock, ride time, stopwatch |
| Additional Functions | Average speed, maximum speed, comparison mode |
| Mounting | Handlebar or stem mount included |
| Water Resistance | Splash resistant (IPX4) |
| Maintenance | Clean with a soft damp cloth; avoid solvents |
| Safety | Ensure bracket securely tightened before riding |
| Spare Parts | Replacement batteries, mounts, and sensors |
| Repairability | Replaceable battery; other repairs by authorized service |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Sensor 2.0 TREK
How do I install the battery in the Sensor 2.0?
Open the battery compartment on the back using a coin or screwdriver. Insert a CR2032 battery with the positive side facing up, then close the cover securely.
Can I pair the Sensor 2.0 with a wireless speed sensor?
Yes, the Sensor 2.0 supports both wired and wireless sensors. For wireless, ensure the sensor is compatible and follow the pairing instructions in the manual.
How do I reset the trip distance?
Press and hold the Mode button for 3 seconds until the trip distance resets to zero. This does not affect the odometer.
What does 'auto start/stop' mean?
The auto start/stop feature automatically pauses the timer and speed recording when you stop, and resumes when you start moving again, saving battery and preventing false data.
How do I clean the bike computer?
Use a soft damp cloth to wipe the display and body. Do not use alcohol, ammonia, or abrasive cleaners, as they may damage the screen or casing.
What is the battery life of the Sensor 2.0?
Under normal use, the CR2032 battery lasts approximately 12 months. Low battery indicator appears when replacement is needed.
How do I change between metric and imperial units?
Press the Set button for 5 seconds to enter setup mode, then cycle through options using the Mode button. Select km/h or mph as desired.
Is the Sensor 2.0 waterproof?
It is splash resistant (IPX4), meaning it can withstand rain and splashes but should not be submerged in water.
What should I do if the display is blank?
First, check the battery orientation and replace if needed. If still blank, press the Reset button on the back for 2 seconds. If the problem persists, contact customer support.
Can I use the Sensor 2.0 on a recumbent bike?
Yes, as long as the mounting bracket can be securely attached to the handlebar or stem. Additional adapters may be required for non-standard bars.
User questions about Sensor 2.0 TREK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bike computer in PDF format for free! Find your manual Sensor 2.0 - TREK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sensor 2.0 by TREK.
