BTH-201C - Headphones DENVER - Free user manual and instructions

Product Type	Wireless Bluetooth Headphones
Brand	Denver
Model	BTH-201C
Dimensions (W x H x D)	14.5 x 10 x 6 cm
Weight	112 g
Bluetooth Version	V3.0 + EDR
Supported Bluetooth Profiles	HSP, HFP, A2DP, AVRCP
Wireless Range	10 m
Operating Frequency	2402–2480 MHz (ISM Band)
Battery Capacity	300 mAh, built-in rechargeable lithium-ion
Music Play Time	Up to 10 hours
Talk Time	Up to 10 hours
Standby Time	250 hours
Charging Time	3 hours
Charging Input	DC 5V (via USB charging cable)
Microphone Sensitivity	-42 dB (0 dB = 1 V/Pa, 1 kHz)
Controls	Multi-function button, volume +/-, previous/next track
LED Indicators	Red (charging), blue (standby), red/blue blink (pairing)
Retractable Headband	Yes, adjustable with L/R markings
Accessories Included	USB charging cable, user manual
Safety Recommendation	Limit exposure to 40 h/week at 80 dB(A); 5 h/week at 89 dB(A)

Frequently Asked Questions - BTH-201C DENVER

How do I pair the headphones with my device?

Ensure the headphones are turned off. Press and hold the Multi-function button for 5 seconds until the LED flashes red and blue alternately (pairing mode). On your device, select BTH-201 from the Bluetooth list. If prompted, enter the password 0000.

How do I charge the headphones?

Connect the included USB charging cable to a powered USB port (e.g., computer) and the other end to the charging port on the headphones. The red LED will turn on during charging and turn off when fully charged (about 3 hours).

What is the battery life of the headphones?

The built-in 300 mAh lithium battery provides up to 10 hours of music playback or talk time, and up to 250 hours of standby time.

How do I answer a call?

When a call comes in, briefly press the Multi-function button (MFB) to answer. To end a call, press the MFB again. During a call, use the + and - buttons to adjust volume.

What do the LED colors mean?

Red LED on: Charging. Red LED off: Fully charged. Red and blue flashing alternately: Pairing mode. Blue blinking every 3 seconds: Connected and in standby. Blue gradually turning on/off: During a conversation.

How do I reconnect to a previously paired device?

Simply turn on the headphones. They will automatically connect to the nearest and last connected device. If not, briefly press the Multi-function button in standby mode to reconnect.

How should I wear the headphones?

The headband is retractable. Adjust it to fit your head comfortably. Look for the L (left) and R (right) markings above the ear cups to ensure correct orientation.

Can I use the headphones for gaming?

Yes, the headphones support the A2DP profile for high-quality audio streaming, making them suitable for gaming. However, they may have slight audio latency typical of Bluetooth V3.0.

Is the headphone waterproof?

No, the headphones are not waterproof. Keep them away from moisture and clean with a soft, dry cloth.

How do I turn the headphones on and off?

To turn on, press and hold the Multi-function button for 5 seconds until the blue LED lights for 1 second and you hear a 'Do' tone. To turn off, press and hold the same button for 5 seconds until the red LED lights for 1 second and you hear the tone.

USER MANUAL BTH-201C DENVER

1: Retractable string
2: "< " Key:previous song
3: “>” key next song
4: led indicator
a)Charging

Led indicator Status of the headset
Red led is on Charging
Red led is off Finished charging

b)In use

Led indicator Status of the headset
Red and blue led blink alternately Pairing
Blue led blinks every 3 seconds Non-conversation
Blue led gradually turns on and off Conversation

5: " ⏻ "Multifunction button(MFB):answer,end reject call,pause and play
6: “-” key, short or long press volume down
7: “+” key, short or long press , volume up
8: charging port
9: build-in microphone

EN

How to use

Listen to music

A: Switching on/off headset

Switch on :press and hold the MFB for 5 seconds ,blue led light is on for 1 second, you can hear "Do"tone

Switch off" :press and hold the MFB for 5 seconds ,red led light is on for 1 second, you can hear "Do"tone

B: Pairing the headset with Bluetooth devices

a) how to enter paring mode

Be sure BTH-201 in power off status first, press and hold the MFB for 5 seconds,

till red and blue led blink alternately, or you hear the indication sound "Do Do" twice, then release the MFB button. The unit will become pairing.

b) Pairing the headset with Bluetooth devices.

Make the headset enter into pairing mode(please refer to "how to enter paring mode")

After searched, select"BTH-201" in the device list

According to indication, enter the password "0000" if needed. And press "connect", when successful connecting, the red led of the headset quickly blinks twice, then the green led lighting every 4 seconds.

EN

Remark: make sure your device has Bluetooth function

Answer Calling

Switch on the headset and make sure in the well connection with mobile phone. here are the table for operation.

Function Status of headset Operation
Answer calling Ringing Short press MFB
Volume up Conversation mode Short press		or long
		press"+"key,when the volume is adjusted to Maximum, you will hear an indication tone
Volume down Conversation mode Short press		ss or long press"-key,when the volume is adjusted to Minimum, you will hear an indication tone

Warning: Excessive pressurer from the headphones can cause the hearing loss. How to wear the headset

The string of headset is retractable, please adjust according to your comfortable size, logo "L" represents left ear, logo "R" represents right ear. See below photo.

Technical line drawing of a wristwatch with a circular strap and central display (no text or symbols)

Charging your headset

Insert the usb charging cable into use port of PC.

Connect charging cable with the charging port of headset

When the red light is on, the headset is charging.

When the red light is off, the headset is charging fully.

EN

Re-connecting to Bluetooth device

A) Automatic connecting

Every time the headset is switched on ,it will connect to the nearest,and the last connected device automatically .

When the headset is in standby mode and doesn't connect to any device, short press MFB button, it will connect to last connected device automatically.

Specification

Bluetooth version V3.0+EDR
Support Bluetooth profile HSP,HFP,A2DP,AVRCP
Standard battery Build in rechargeable 300mAh lithium battery
Music play time Max 10 hours
Standby time 250hours
Charging time 3 hours
Talk time 10 hours
Dimension 14.5*10*6cm
Weight 112g
Operating range 10 meters
Frequency 2402MHz~2480MHz ISM Ban
Microphone specification -42dB(0dB=1V/Pa,1KHz)
Input DC 5V
Accessories	User manual and usb cable

WARNING

Read Safety Instructions Before Making Volume Changes

Safe use depends on exposure time and volume levels.

Volume at 80 dB(A), exposure should be limited to 40 hours/week. At 89 dB(A) exposure should not exceed 5 hours/week.

EN

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the apprionale and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

ALL RIGHTS RESERVED COPY RIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com www.facebook.com/denverelectronics

Importer: DENVER ELECTRONICS A/S

Stavneagervej 22

DK-8250 EGAA

DENMARK

HR

Hrvatski Priručnik

Pregled

1: povlačenje niz

Technical line drawing of a wrist strap with measurement scale and adjustment knobs (no text or symbols)

HR

Punjenje slušalica

Technical line drawing of a wristwatch with a circular strap and central display (no text or symbols)

Technical line drawing of a wristwatch with a circular frame and central dial (no text or symbols)

NL

Line drawing of a wristwatch with a digital display showing four buttons (A, B, C, D) and no text or symbols on the device itself.

FI

Technical line drawing of a wristwatch with a circular strap and central display (no text or symbols)

Headset aufladen

Technical line drawing of a wristwatch with a digital display (no text or symbols)

PL

Technical line drawing of a wristwatch with a circular strap and control panel (no text or symbols)

PT

Carregar os auscultadores

Technical line drawing of a wristwatch with a circular frame and central display (no text or symbols)

ES

Carga del auricular

Technical line drawing of a wristwatch with a circular frame and central display (no text or symbols)

Ladda ditt headset