SR950 - Headphones SAMSON - Free user manual and instructions

Product Type	Closed-Back Studio Reference Headphones
Brand	Samson
Model	SR950
Driver Type	Dynamic, 50 mm with Neodymium magnet
Frequency Response	10 Hz - 25 kHz
Impedance	32 Ω
Sensitivity	96 dB / 1 mW
Design	Circumaural, closed-back
Ear Cushions	Plush velour, circumaural
Headband	Self-adjusting
Connector	Gold-plated 3.5 mm stereo mini jack with 1/4" (6.3 mm) adapter
Cable Length	8.25 ft (2.5 m)
Weight	10.75 oz (305 g)
Height (approx.)	8.5 inches (21.6 cm)
Width (approx.)	7.5 inches (19.1 cm)
Depth (approx.)	3.5 inches (8.9 cm)
Power Source	Passive (no battery required)
Key Features	Accurate audio reproduction, smooth highs, warm bass, lightweight design, reduced ear fatigue
Intended Use	Tracking, critical mixing, music playback
Cleaning	Wipe ear cushions and headband with a damp cloth; do not use solvents
Safety Warning	Use at low volumes to prevent hearing damage; follow OSHA guidelines
Replaceable Parts	Ear cushions and cable (contact Samson for service)
Warranty	USA: register online; international: contact local distributor

Frequently Asked Questions - SR950 SAMSON

What is the impedance of the Samson SR950 headphones?

The impedance is 32 Ω, making them easy to drive with portable devices like smartphones and MP3 players.

How should I clean the SR950 ear cushions?

Use a soft, damp cloth to gently wipe the velour ear cushions. Avoid using harsh chemicals or submerging them in water.

Can I use the SR950 headphones with my audio interface?

Yes, the headphones have a 3.5 mm connector and come with a 1/4-inch adapter, making them compatible with most studio equipment.

Are the SR950 headphones suitable for mixing?

Absolutely! They are designed as Studio Reference Headphones with accurate sound reproduction, ideal for critical mixing.

How long is the cable on the SR950?

The cable is 8.25 feet (2.5 meters) long, providing ample reach for studio setups.

What type of ear cushions do the SR950 have?

They feature plush velour ear cushions that are circumaural (over-ear) and comfortable for long listening sessions.

Is there a risk of hearing damage with these headphones?

Yes, like all headphones, excessive volume can cause permanent hearing loss. Always listen at moderate levels and follow OSHA guidelines.

Do the SR950 headphones require batteries?

No, they are passive headphones and do not require any power source.

What is the frequency response of the SR950?

The frequency response is 10 Hz - 25 kHz, covering a wide range for detailed audio reproduction.

Can I replace the ear pads on the SR950?

Yes, ear pads are replaceable. Contact Samson customer service or your local distributor for replacement parts.

USER MANUAL SR950 SAMSON

This product is capable of causing permanent damage to your hearing if used at excessive volumes!

To protect your hearing, the Samson SR950 headphones should always be used at as low a volume as possible. We recommend that you stringently follow the guidelines established by the U.S. Occupational Safety Health Administration (OSHA) regarding maximum time exposure at various sound pressure levels:

Pay attention to what your ears are telling you! Ringing is a sign that you have set the gain levels too high and that damage may result. We recommend that you consult with a qualified audiologist if you exhibit ringing or any other symptoms.

Introduction

Congratulations on purchasing your new Samson SR950 Studio Reference Headphones! The SR950 are closed-back headphones designed to accurately reproduce your audio for tracking, for critical mixing, or for music playback. The headphones high frequency response is smooth and sweet, and the bass response is warm and tight, thanks to the 50 mm neodymium drivers.

The lightweight, circumaural design reduces ear fatigue making the headphones easy to wear during long listening sessions. The SR950 employs plush velour ear cushions that are comfortable and fit snugly, while the self-adjusting band ensures a good fit. Whether your are just kicking back, listening to your MP3 player, or mixing your digital recording, the SR950 headphones are an ideal choice.

If your SR950 headphones were purchased in the United States, you'll also find a warranty card enclosed—please don't forget to fill it out and mail it in so that you can receive online technical support, and so that we can send you updated information about this and other Samson products. Also, be sure to check out our web site www.samsontech.com for complete information about our full product line, product videos, upcoming promotions and special events. We recommend you record your serial number in the space provided below for future reference.

Serial number: ____

Date of purchase: ____

With proper care your SR950 headphones will operate trouble free for many years. Should your unit ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in the original carton. If you purchased your Samson product outside the United States, please contact your local distributor for warranty information and service.

Features

Line drawing of a Samsung headphones with earbuds and headband (no text or symbols)

sponse with no internal resonance and minimal distortion

audio devices without any additional amplification

extended periods of listening

Specifications

Driver type Dynamic

Type Circumaural, Closed-Back

Driver Unit 50 mm, 25μ diaphragm, Neodymium magnet

Frequency response 10 Hz - 25 kHz

Impedance 32 Ω

Sensitivity 96 dB / 1 mW

Connector Gold-plated 18 " (3.5 mm) stereo mini connector with

18 " (3.5 mm) to 14 " (6.3 mm) adapter

Cable 8.25' (2.5 m) long

Weight 10.75 oz (305 g)

Specifications subject to change without notice.

SR950 Frequency Response Curve

Samson Technologies Corp.

45 Gilpin Avenue

Hauppauge, New York 11788-8816

Phone: 1-800-3-SAMSON (1-800-372-6766)

Fax: [phone]

www.samsontech.com