SEP 560BT - Headphones SENCOR - Free user manual and instructions

Product Type	Wireless Bluetooth Earbuds
Brand	Sencor
Model	SEP 560BT
Bluetooth Version	5.3
Audio Codecs	SBC, AAC
Transmitter Power	100 mW @ 2.4GHz – 2.4835GHz
Wireless Range	Up to 10 m (depending on interference)
Controls	Touch pad on each earbud
Microphone	Yes (built-in)
Voice Assistant Support	Yes (Siri/Google Assistant via long touch)
Game/Music Mode	Switchable with 4 short touches
Volume Control	Left earbud (single touch down), Right earbud (single touch up)
Track Control	Left (3 touches previous), Right (3 touches next)
Charging Connector	USB-C
Charging Case	Yes, with LED indicators
Automatic Power On/Off	When removed/inserted from case
Operating Time	Several hours (typical use)
Storage and Transport	Use charging case
Manufacturer	FAST CR, a.s.

Frequently Asked Questions - SEP 560BT SENCOR

How do I pair the SEP 560BT with my phone?

Remove the earbuds from the charging case; they will turn on automatically. On your phone, search for Bluetooth devices and select 'SEP 560BT'. If prompted for a PIN, enter '0000'.

How do I turn on the earbuds manually?

If the earbuds are outside the charging case and off, press and hold the touch pad on each earbud until they switch on.

How do I answer a call?

When a call comes in, double-tap the touch pad on either earbud to answer. To reject, long-press (3 seconds) the touch pad.

How do I adjust the volume?

During music playback, single-tap the left earbud to decrease volume and single-tap the right earbud to increase volume.

How do I change tracks?

Triple-tap the left earbud to go to the previous track and triple-tap the right earbud to go to the next track.

How do I activate the voice assistant?

Long-press (1 second) the touch pad on either earbud to launch Siri or Google Assistant.

How do I switch between game and music mode?

Quickly tap the touch pad four times on either earbud to toggle between Game and Music mode.

How do I charge the earbuds and the case?

Place the earbuds in the charging case; they will charge automatically. To charge the case, connect it to a USB-C power source. The case LED indicates charging status (red when charging, green when fully charged).

What do the LED indicators mean?

Left and right earbud LEDs lit: earbuds charging. Case LED green: case fully charged. Case LED red: case charging. Case LED flashing red: case battery low. No earbud LEDs: earbuds fully charged.

Why is one earbud not working or not connecting?

First, ensure both earbuds are charged and placed in the case. Remove them together and wait for them to pair with each other (they are pre-paired from the factory). If one still doesn't work, try resetting by returning both to the case and repeating the pairing process.

USER MANUAL SEP 560BT SENCOR

Line drawing of a pair of wireless earbuds and charging case (no text or symbols)

USER'S MANUAL

NÁVOD K OBSLUZE

NÁVOD NA OBSLUHU

INSTRUKCJA OBSŁUGI

HASZNÁLATI ÚTMUTATÓ

UPUTSTVO ZA UPOTREBU

KORISNIČKI PRIRUČNIK

ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ

Wireless earpods with a microphone

1. Supply content

"L" and "R" earphone

Charging case

User's manual

USB-C charging cable

2. SEP 560 BT Bluetooth earphones description

|1| Charging case
|2| Left earphone LED indicator
|3| Charging box LED indicator
|4| Right earphone LED indicator
|5|USB-C charging connector
|6| Touch pad for earphones control
|7| Microphone
|8| Earphone contacts for recharging from the charging case
|R| Right earphone storage space, right earphone
|L| Left earphone storage space, left earphone

Left and right earphone function

Touch pad for earphones control

2 x short touch during an incoming call - answer the call
1 x long touch (3 seconds) during an incoming call - call rejection
2 x short touch during an ongoing call - end call
2 x short touch - play function
2 x short touch - pause function
1 x long touch - launch SIRI/Google assistant
4 x short touch - change GAME / MUSIC mode

Left earphone

1 x short touch in music mode - volume down
3 x short touch - previous track

Right earphone

1 x short touch in music mode - volume up
3 x short touch - next track

3. Putting into operation

Before first use, be sure to read the safety instructions contained in this user's manual carefully.

Before using for the first time, remove the protective film of the charging contacts on the bottom of the earphones and return them

to the charging case. Start charging the charging case and the earphones to the maximum level.

Opening and closing the case – The case is opened and closed by sliding the top lid from the front side to the back side as shown in the main picture.

Turning on the earphones – Taking the earphones out of the case will automatically switch them on. When the earphones are in the off state outside the charging case. Press and hold the touch pad on each earphone and wait for the earphones to switch on.

Turning off the earphones – Inserting the earphones into the charging case will automatically turn off the earphones. Long press and hold the touch pad of the earphones until the earphones turn off.

Pairing the earphones with each other – The earphones are already paired from the factory and do not need to be paired with each other. (If pairing to TWS mode fails, return the earphones to the charging case and repeat the above instructions).

Warning: To prevent damage to your hearing, always keep the volume level of your device to a minimum before connecting BT headphones to your mobile device. Keep the touch pad clean and avoid touching other objects or body parts such as hair.

Note: If the BT earphones are not paired with any device, they will turn off when left idle for a long time. Put them in the case.

4. Pairing your earphones via Bluetooth

To pair the BT headphones with your mobile device, do the following: Remove the earphones from the charging case and search for the Bluetooth earphones name "SEP 560BT" on the device you want to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT headphones are pairing, use the following code: "0000".

To cancel the pairing process, disconnect the BT earphones from your mobile device (cancel the Bluetooth pairing).

Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and your paired device is kept within 10 meters. Depending on ambient interference, in some cases it may be necessary to maintain a shorter distance between the BT headphones and the paired device.

5. Charging

A charged battery provides power for several hours of operation at

normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.

When the BT earphones are placed in the charging case, the case LEDs show the charging status of the BT earphones and the charging case:

a. The LED indicator of left "2" and right "4" earphone is lit – the earphones are charging
b. The LED indicator of the left "2" and right "4" earphone is lit, the LED indicator of the charging case "3" is green - one of the earphones is charging.
c. Left "2" and right "4" LED indicator is not lit - earphones are charged
d. Charging case LED indicator "3" is red – the case is charging
e. Charging case LED indicator "2" flashes red – the charging case is discharged
f. Charging case LED indicator "2" is green – the charging case is charged

Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10% - 20%). Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorised service centre for more information.

Recommendation: If your headphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months. We recommend to store the BT earphones and the charging case with the battery charged to prevent irreparable damage to the battery (loss of capacity).

Specification:

• Bluetooth Version 5.3
  • Maximum Transmitter Power 100mW @ 2.4GHz-2.4835GHz
• Codes: SBC, AAC

1. Obsah balení

„L“ a „R“ sluchátko

Dobjecí krabička

Manufacturer: FAST CR, a.s.

U Sanitasu 1621

25101 Ricany

Czech Republic