Jade 3 - TV Antenna Evolveo - Free user manual and instructions

Product Type	TV Antenna
Brand	Evolveo
Model	Jade 3
Frequency Range	VHF 174-230 MHz, UHF 470-862 MHz
Gain	20 dBi (typical)
Impedance	75 Ω
Cable Length	1.5 m (estimated)
Connector Type	F-type female
Mounting Type	Indoor / Outdoor (wall or tabletop)
Material	Plastic, metal elements
Color	Black (typical)
Dimensions (approx.)	200 x 100 x 50 mm
Weight (approx.)	200 g
Power Supply	External adapter, DC 5V/0.2A (included)
Input Voltage (adapter)	AC 100-240 V, 50/60 Hz
Output Voltage (adapter)	DC 5.0 V
Output Current (adapter)	0.2 A
Output Power (adapter)	1.0 W
Average Active Efficiency (adapter)	67.45%
No-load Power Consumption (adapter)	0.09 W
Operating Temperature	-10°C to +40°C (estimated)
Storage Temperature	-20°C to +60°C (estimated)
Country of Origin	China
Warranty	2 years (typical)
Included Accessories	Antenna, power adapter, stand/adhesive mount

Frequently Asked Questions - Jade 3 Evolveo

How do I install the Evolveo Jade 3 antenna?

Connect the antenna to your TV via the coaxial cable. Plug the power adapter into a wall outlet and the antenna. Place the antenna near a window or high location for best reception.

Can I use the Jade 3 outdoors?

Yes, the antenna is designed for both indoor and outdoor use. Ensure it is mounted securely and protected from direct rain if used outdoors.

What is the frequency range of this antenna?

The Evolveo Jade 3 supports VHF (174-230 MHz) and UHF (470-862 MHz) bands for digital TV reception.

Do I need a power adapter for the antenna?

Yes, the antenna requires a power adapter (included) with DC 5V/0.2A output. Connect it to the antenna's power jack.

How can I improve reception?

Place the antenna higher, near a window, and away from electronic interference. Adjust the orientation and rescan channels on your TV.

Is the Jade 3 compatible with all TVs?

Yes, it works with any TV that has a built-in digital tuner (DVB-T2) and a coaxial input.

What type of connector does the antenna use?

It uses a standard F-type female connector. The included cable has a male F-type plug.

Can I amplify the signal?

The Jade 3 has a built-in amplifier powered by the adapter. No external amplifier is needed.

How do I clean the antenna?

Unplug the antenna. Wipe with a dry soft cloth. Do not use water or cleaning solvents.

What should I do if the antenna is not receiving channels?

Check connections, ensure the adapter is plugged in, reposition the antenna, and run a channel scan on your TV. If problem persists, contact support.

USER MANUAL Jade 3 Evolveo

Three black-and-white product images: a antenna, a cable with a wire, and a mechanical component (no text or symbols)

Copyright © Abacus Electric, s.r.o.

www.evolveo.com

www.facebook.com/EvolveoCZ

Manufacture's name or trade mark, commercial registration number and address
	Name: Guangdong Xinbao Electronic Technology Co., Ltd
	Address:	Room 402, Building 1, No.6, Puxin 4th Street, Shipai Town, 523330 Dongguan City, PEOPLE'S REPUBLIC OF CHINA.
Model identifier
				Article: XBA0500200V1
				Description: Power adapter
	Information published			value unit
	Input voltage: AC 100-240				V
	Input AC frequency:			50/60	Hz
	Output voltage		DC 5.0		V
	Output current			0.2	A
	Output power:			1.0	W
	Average active efficiency:			67.45	%
	Efficiency at low load(10%):			/	%
	No-load power consumption:			0.09	W