E-STP 1020 N - Water pump Ergotools Pattfield - Free user manual and instructions
Find the device manual for free E-STP 1020 N Ergotools Pattfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Ergotools Pattfield |
| Model | E-STP 1020 N |
| Power Rating | 1020 W |
| Power Supply | 230 V ~ 50 Hz |
| Max Flow Rate | Approx. 5000 L/h |
| Max Head | Approx. 35 m |
| Max Immersion Depth | 7 m |
| Max Liquid Temperature | 35 °C |
| Housing Material | Stainless Steel / Plastic |
| Impeller Type | Centrifugal |
| Connection Size | 1" (25 mm) female thread |
| Cable Length | 10 m |
| Protection Class | IPX8 |
| Dimensions (L x W x H) | 250 x 180 x 300 mm |
| Weight | 5.5 kg |
| Maintenance | Clean filter regularly; check seals |
| Safety Features | Thermal overload protection, IPX8 waterproof |
| Spare Parts Availability | Spare parts available from manufacturer |
| Included Accessories | User manual, adapters |
Frequently Asked Questions - E-STP 1020 N Ergotools Pattfield
How do I prime the pump before use?
Ensure the pump is fully submerged in water. Fill the pump housing with water through the outlet port until no air remains. Connect the hose and switch on.
What should I do if the pump does not start?
Check the power supply, fuse, and cable connections. Ensure the pump is submerged and the thermal protector has not tripped. Clean the inlet filter.
Can the pump run dry?
No, running dry can damage the pump. Always ensure the pump is submerged before operation. The pump has a thermal cutout to prevent damage.
How often should I clean the filter?
Clean the filter after every use or more frequently if pumping dirty water. A clogged filter reduces performance.
What is the maximum particle size this pump can handle?
The pump can handle particles up to 10 mm in diameter. For larger debris, use a pre-filter.
Is the pump suitable for saltwater?
No, this pump is designed for fresh water only. Saltwater will corrode internal components.
How do I store the pump during winter?
Drain all water from the pump and hoses. Store in a frost-free location. Clean and dry before storage.
Can I use an extension cord?
Yes, but ensure it is suitable for outdoor use, has a minimum wire cross-section of 1.5 mm², and is fully unwound to avoid overheating.
What does the thermal overload protection do?
It automatically shuts off the pump if it overheats. Allow the pump to cool down for 15-20 minutes before restarting.
Where can I find spare parts?
Contact Ergotools Pattfield customer service or authorized dealers. Provide the model number E-STP 1020 N.
User questions about E-STP 1020 N Ergotools Pattfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual E-STP 1020 N - Ergotools Pattfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-STP 1020 N by Ergotools Pattfield.
