H-823 - Security Camera BLOW - Free user manual and instructions

Type	Security Camera
Brand	BLOW
Model	H-823
App	V380 Pro
WiFi Connectivity	2.4 GHz only (5 GHz not supported)
4G Support	Yes (separate model variant)
Micro SD Card Slot	Yes, up to 128 GB
Connection Methods	QR code scanning, AP hotspot, WiFi smart-link
Reset Button	Press for 5 seconds to restore factory settings
Power Supply	5V DC (typical)
Resolution	1080p Full HD
Night Vision	Yes, IR LEDs
Motion Detection	Yes (via app)
Two-Way Audio	Yes (via built-in microphone and speaker)
Operating Temperature	-10°C to 50°C (typical)
Installation	Indoor/Outdoor (with proper housing)
Warranty	1 year (typical)

Frequently Asked Questions - H-823 BLOW

How do I reset the BLOW H-823 camera?

Press and hold the Reset button for 5 seconds. The camera will restore factory settings and restart. The reset button location varies by model.

How do I connect the camera to WiFi?

Power on the camera and listen for voice prompts. Open the V380 Pro app, select WiFi Smart Camera, follow the steps: choose your WiFi network, enter password, and use either QR code scanning or AP hotspot mode to complete pairing.

Does the H-823 support 5G WiFi?

No, the camera only supports 2.4 GHz WiFi. 5G WiFi networks are not compatible.

How do I install a micro SD card?

Open the plastic cover on the bottom or side of the camera (depending on model). Insert the TF memory card with the metal contacts facing the motherboard, up to 128 GB.

Which app do I need for the BLOW H-823 camera?

Download and install the V380 Pro app from the App Store or Google Play. Scan the QR code in the manual to download directly.

How do I set up the camera using QR code?

Follow the voice prompts. When the camera says 'Please start the QR code with the camera', display the QR code from the app in front of the camera lens. The camera will beep to confirm successful scanning.

What is the maximum SD card capacity?

The camera supports micro SD (TF) cards up to 128 GB in capacity.

How do I change the WiFi network after initial setup?

Reset the camera by pressing the Reset button for 5 seconds. Then follow the initial setup steps again with the new WiFi network.

Can I use the camera outdoors?

The camera can be used outdoors if placed in a weatherproof housing. Check the product specifications for IP rating; typical indoor models are not waterproof.

How do I download the user manual?

Go to the manual page and click the Download button to get the PDF version. The manual is available in multiple languages.

USER MANUAL H-823 BLOW

Kamery WiFi

graph TD
    A["Power on"] --> B["Select wifi"]
    B --> C["Connecting"]

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.