H-422 - Security Camera BLOW - Free user manual and instructions

Brand	BLOW
Model	H-422
Product Type	WiFi Security Camera (also 4G variant)
Connectivity	WiFi (2.4 GHz, 5G not supported), 4G SIM card (optional)
Supported App	V380 Pro
Setup Methods	QR Code, AP Hotspot, WiFi Smart-Link
Memory Card Support	Micro SD/TF card up to 128 GB
Power Supply	5V DC via USB (typical)
Reset Button	Press for 5 seconds to restore factory settings
Audio	Voice prompts for setup
Dimensions	Approx. 10 x 8 x 8 cm (estimated)
Weight	Approx. 150 g (estimated)
Material	Plastic
Night Vision	Infrared (typical)
Motion Detection	Supported via app
Two-Way Audio	Supported (typical)
Storage	Local via microSD card or cloud (via app)
Cleaning	Wipe with dry soft cloth
Safety	Keep away from water; use only specified power adapter
Spare Parts & Repairability	Not user-serviceable; contact support for issues

Frequently Asked Questions - H-422 BLOW

How do I download the app for the BLOW H-422 camera?

Search for V380 Pro in the App Store or Google Play, or scan the QR code provided in the manual to download and install the app.

What WiFi network does the camera support?

The camera supports 2.4 GHz WiFi only. 5G WiFi is temporarily not supported.

How do I reset the camera to factory settings?

Press and hold the Reset button for 5 seconds. The camera will restore to factory defaults.

Can I use a 4G SIM card with the H-422?

Yes, the 4G Smart Camera version supports a 4G SIM card. Insert the SIM card into the slot under the bottom cover.

What is the maximum memory card size supported?

The camera supports Micro SD/TF cards up to 128 GB.

How do I connect the camera using the QR code method?

Power on the camera and wait for the voice prompt. In the app, select QR Code option, then point your phone’s camera at the QR code on the device to complete pairing.

What is the AP hotspot connection method?

Switch the camera to AP mode by pressing the reset button for 2 seconds. Then connect your phone to the device hotspot (MV+ID) in WiFi settings, return to the app, and complete setup.

Why is my camera not connecting to WiFi?

Ensure the camera is close to the router and your phone. Make sure you are using 2.4 GHz WiFi. Also check that the password is correct and the device is powered on.

How do I set a password for the camera?

After adding the device in the app, go to the Play interface and follow the prompts to set a password for viewing.

What should I do if the camera gets wet?

Immediately disconnect power and dry the camera thoroughly. Do not use it until completely dry. However, this camera is not waterproof; avoid exposure to rain or splashes.

USER MANUAL H-422 BLOW

Kamery WiFi

graph TD
    A["Power on"] --> B["Select wifi"]
    B --> C["Connecting"]
    D["Robot Icon"] --> E["Connection Button"]

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.