H-932 - Security Camera BLOW - Free user manual and instructions

Product Type	Security Camera
Brand	BLOW
Model	H-932
Video Resolution	1080p Full HD
Lens	Wide angle, 90° field of view
Night Vision	Infrared, up to 10 meters
Motion Detection	Yes, with configurable sensitivity
Audio	Two-way audio with built-in microphone and speaker
Power Supply	DC 12V, 1A (adapter included)
Connectivity	Wi-Fi 2.4GHz, Ethernet port (optional)
Storage	MicroSD card slot (up to 128GB), cloud storage support
Dimensions	10.5 x 7.0 x 7.0 cm
Weight	320 g
Weather Resistance	IP65 rated (indoor/outdoor)
Material	ABS plastic with metal bracket
Mounting	Wall mount with included screws
Operating Temperature	-20°C to 50°C
Warranty	1 year limited
Additional Features	App control, push notifications, scheduled recording

Frequently Asked Questions - H-932 BLOW

How to reset the camera to factory settings?

Press and hold the reset button on the back of the camera for 10 seconds until you hear a beep. The camera will restart and restore default settings.

How to connect the camera to Wi-Fi?

Download the BLOW app, create an account, and follow the in-app instructions. Power on the camera, scan the QR code displayed in the app, and enter your Wi-Fi password.

Can I use the camera without internet?

Yes, the camera supports local recording to a MicroSD card. However, remote viewing and notifications require an internet connection.

How to enable night vision?

Night vision activates automatically in low light. You can also manually enable it in the app settings under 'Night Vision Mode'.

How to set up motion detection alerts?

In the BLOW app, go to 'Settings' > 'Motion Detection'. Toggle it on, adjust sensitivity, and choose notification preferences.

What storage options are available?

The camera supports MicroSD cards up to 128GB (not included) and cloud storage subscriptions for continuous recording.

Is the camera weatherproof?

Yes, the H-932 has an IP65 rating, meaning it is protected against dust and low-pressure water jets from any direction. Suitable for outdoor use.

How to clean the camera lens?

Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Gently wipe the lens in a circular motion. Avoid abrasive materials.

Can I mount it on a ceiling?

Yes, the camera comes with a mounting bracket that can be attached to walls or ceilings. Ensure the surface is sturdy and use the provided screws.

What to do if the camera is not powering on?

Check the power adapter connection and cable. Try a different outlet. If using PoE, ensure the injector or switch is powered. If the issue persists, contact support.

USER MANUAL H-932 BLOW

Kamery WiFi

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.