H-933 - Security Camera BLOW - Free user manual and instructions

Product Type	Security Camera
Brand	BLOW
Model	H-933
Resolution	1080p Full HD
Night Vision	IR LED, up to 10m
Field of View	110° wide angle
Connectivity	WiFi 2.4 GHz (802.11 b/g/n)
Power Supply	DC 5V/1A via micro USB
Memory Card	Micro SD up to 128GB (not included)
Audio	Two-way audio with built-in mic and speaker
Motion Detection	Yes, with push notifications
App	V380 Pro (iOS and Android)
Setup Methods	QR code scanning, AP hotspot, WiFi smart-link
Reset Button	Press for 5 seconds to factory reset
Mounting	Indoor/outdoor (IP66 weatherproof)
Weight	Approx. 200 g
Dimensions	100 x 80 x 80 mm
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C
Warranty	1 year

Frequently Asked Questions - H-933 BLOW

How do I reset the BLOW H-933 camera to factory settings?

Press and hold the Reset button for 5 seconds until you hear a voice prompt. The camera will restore factory defaults.

Which app should I use for the H-933 camera?

Download and install the V380 Pro app from the App Store (iOS) or Google Play (Android). Then follow the in-app instructions to add your device.

Does the camera support 5 GHz WiFi?

No, the H-933 only supports 2.4 GHz WiFi. 5 GHz networks are not compatible.

How do I insert a micro SD card?

Locate the micro SD slot (usually at the bottom or side). Open the plastic cover, insert the card with the metal contacts facing the motherboard, and close the cover. The camera supports up to 128 GB.

What are the different setup modes available?

The camera supports three modes: QR code scanning (scan code with camera), AP hotspot (connect to camera's WiFi), and WiFi smart-link (auto configuration via app). Voice prompts guide you.

Does the camera have night vision?

Yes, it features infrared LEDs for night vision up to 10 meters, automatically switching in low light.

Can I talk through the camera?

Yes, the camera supports two-way audio. Use the V380 Pro app to listen and speak through the camera's built-in mic and speaker.

Does the camera support motion detection alerts?

Yes, motion detection is enabled by default. You will receive push notifications on your phone when motion is detected. Sensitivity can be adjusted in the app settings.

What is the power requirement for the H-933?

The camera requires a DC 5V/1A power input via micro USB. Use the included adapter or a standard USB power source.

Is the camera suitable for outdoor use?

Yes, it has an IP66 weatherproof rating, making it resistant to rain and dust. Suitable for both indoor and outdoor mounting.

USER MANUAL H-933 BLOW

Kamery WiFi

graph TD
    A["Power on"] --> B["Select wifi"]
    B --> C["Connecting"]
    D["Robot Icon"] --> E["Connection Button"]

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.