H-423 - Security Camera BLOW - Free user manual and instructions

Product Type	Security Camera
Model	H-423
Brand	BLOW
Dimensions (W x H x D)	70 x 70 x 150 mm
Weight	350 g
Power Supply	12V DC, 1A
Resolution	1080p Full HD (1920x1080)
Night Vision	Up to 30 meters with IR LEDs
Field of View	90° diagonal
Motion Detection	Yes, with adjustable sensitivity
Audio	Built-in microphone and speaker
Connectivity	Wi-Fi 802.11 b/g/n (2.4 GHz)
Storage	MicroSD card up to 128 GB
Weatherproof Rating	IP65
Operating Temperature	-20°C to 50°C
Maintenance	Clean lens with soft dry cloth; check connections periodically
Safety	Use only included power adapter; avoid exposure to extreme conditions
Spare Parts	Mounting bracket, screws, and power adapter available separately
Repairability	Professional repair recommended; no user-serviceable parts inside

Frequently Asked Questions - H-423 BLOW

How do I install the BLOW H-423 security camera?

Mount the camera using the included bracket, connect the power adapter, and download the BLOW Cam app to pair via Wi-Fi.

What is the night vision range?

The camera can see up to 30 meters in total darkness using infrared LEDs.

Can I store footage without a subscription?

Yes, insert a MicroSD card (up to 128 GB) for local recording with no monthly fees.

How do I reset the camera to factory settings?

Press and hold the reset button on the back for 10 seconds until the LED flashes rapidly.

Is the camera weatherproof?

It has an IP65 rating, meaning it is protected against dust and water jets.

What should I do if the camera goes offline?

Check your Wi-Fi connection, restart the camera by unplugging it for 30 seconds, and ensure the router is working.

Can I view the camera remotely?

Yes, via the BLOW Cam app on iOS and Android from anywhere with internet access.

How do I clean the camera lens?

Use a soft, lint-free cloth slightly dampened with water. Avoid harsh chemicals.

Does the camera support two-way audio?

Yes, it has a built-in microphone and speaker for two-way communication.

What power supply is required?

Use the supplied 12V DC, 1A adapter. Do not use third-party adapters to avoid damage.

USER MANUAL H-423 BLOW

Kamery WiFi

graph TD
    A["Power on"] --> B["Select wifi"]
    B --> C["Connecting"]

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.