H-263 - Security Camera BLOW - Free user manual and instructions

Product Type	Security Camera
Brand	BLOW
Model	H-263
Connectivity	WiFi 2.4 GHz (5 GHz not supported), 4G LTE (optional, with SIM card)
Mobile App	V380 Pro (available on App Store and Google Play)
Memory Card Support	microSD up to 128 GB (FAT32 format recommended)
Power Supply	DC 5V (typical adapter, not included)
Reset Button	Press for 5 seconds to restore factory defaults
Camera Types	PTZ, Bullet, PT Baby, Panoramic (varies by model)
Initial Setup	Power on, wait for voice prompt, add device via app
WiFi Setup Mode	AP Mode (hotspot) or Smart Config (WiFi Smart Camera)
4G Camera Setup	Insert SIM card, power on, scan QR code on camera
Password Protection	Set device password in app during setup
Cleaning Instructions	Use a soft, dry cloth; avoid liquids and abrasive cleaners
Safety Warning	Keep device away from water and extreme temperatures

Frequently Asked Questions - H-263 BLOW

How do I connect the camera to WiFi?

Open the V380 Pro app, select 'WiFi Smart Camera'. Ensure your phone is connected to 2.4 GHz WiFi (5 GHz not supported). Follow the in-app steps: enter WiFi password, then choose AP or Smart Config mode. For AP mode, connect your phone to the camera's hotspot (MV+ID) and return to the app.

What should I do if the camera won't connect?

First, keep the camera close to your router and phone. Make sure your WiFi is 2.4 GHz. Press the Reset button for 2 seconds to switch to hotspot mode if you cannot find the MV+ID hotspot. Then retry the setup from the app.

How do I reset the camera to factory settings?

Press and hold the Reset button for about 5 seconds. You will hear a voice confirmation. The camera will reboot and all settings will be cleared.

Can I use a 5 GHz WiFi network?

No, the H-263 camera only supports 2.4 GHz WiFi. 5 GHz networks are not compatible. Please switch your router to 2.4 GHz or use a dual-band router broadcasting both bands.

What type of memory card does the camera support?

The camera supports microSD cards up to 128 GB. Insert the card with the metal contacts facing the motherboard (for PTZ/bullet cameras) or follow the direction diagram for baby/panoramic cameras.

How do I set up a 4G camera?

Open the bottom cover, insert a valid SIM card and a microSD card, then close the cover. Power on the camera and wait about 1 minute until you hear 'connection completed'. Then use the app to scan the QR code on the camera to add the device.

Why can't I find the camera hotspot (MV+ID)?

If after powering on you don't see a hotspot named MV+ID, press the Reset button for 2 seconds to switch the camera to hotspot mode. Make sure your phone's WiFi is enabled and scan again.

How do I change the device password?

During the initial setup, after adding the camera, you will be prompted to set a password on the 'Play interface'. You can also change it later in the app settings under device details.

Can I view the camera remotely?

Yes, once the camera is connected to your WiFi and added to the V380 Pro app, you can view the live feed from anywhere using your mobile data or another WiFi network.

How do I clean the camera?

Use a soft, dry microfiber cloth to gently wipe the camera body and lens. Do not use any liquids, sprays, or abrasive cleaners, as they may damage the device.

USER MANUAL H-263 BLOW

Kamery WiFi

graph TD
    A["Power on"] --> B["Select wifi"]
    B --> C["Connecting"]
    D["Robot Icon"] --> E["Connection Button"]

Device connecting... Try to keep Device close to router and mobile phone

Search for "V380 Pro" in the

download and install the V380 Pro APP.

Scan the QR code to download the V380 Pro app

Device initialization

App Store or scan the QR code at the bottom left to

First time to use camera, please be patient to setting.

Please add your device to app after you hear the voice to confirm that the device has been started.

Reset button y, and the specifics are subject to the

Press "Reset" button for 5 second to Restore factory settings.

(The position of the Reset button is for reference onl device you have)

Choose the type of your camera

Please select the corresponding connection method according to your camera type.

- For the devices which using WiFi or network cables, please select "WiFi Smart Camera"

*5G WiFi is temporarily not supported

- For 4G camera, please select "4G Smart Camera" and add your device by scanning the QR code.

WiFi Smart Camera

*Before adding a wireless camera, please turn on the mobile WiFi first.

AP

Step2. Select your WiFi, and input password, then select . "Confirm"

Step3. Select the , and select the device hotspot(MV+ID), " Connect AP spot"

then device will automatically connect to WiFi after returning to the App

* Please select if WLAN network.has no Internet access."CONNECT"

* Please press "Reset" button 2s to change WiFi mode to Hotspot model if you don't find the hotspot "MV+ID".

Step4. Select or input "device name"

Step5. Click "Play interface" to set your password.

Return to view your device.

4G Smart Camera

Step1. Open the bottom cover of the camera body, install the SIM card and TF card, and then close the bottom cover to finish the installation (embedded SIM card camera does not need to be installed).

Step2. Power on the camera, waiting for 1 minute; when camera prompts "connection completed", please use APP to scan the QR code on the camera to add device.

*schematic diagram for reference only, the species are subject to the device you have)

Step3.when camera prompts "Successful connection", please use APP to scan the QR code on the camera to add device.

tep4. After added the camera, you can check the remaining data and recharge data on main screen or check it in "Profile".

SD Micro Memory card Installation

Note: The camera can maximum support a 128G TF memory card.

PTZ camera: The TF memory card is at the bottom of the camera.

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

Bullet camera: The TF memory card is at the bottom of the camera. Hotspot Connection

Open the plastic cover of the micro SD slot. Then, you will find the card slot.

Insert the memory card carefully(the metal surface of the memory card is close to the motherboard).

, and select "Finish" or "Skip".

PT Baby camera: Put the camera in a heads-up position, and then you will see the card slot,

Insert the memory card according to the card direction diagram.

Panoramic camera: The memory card slot is on the side.

Insert the memory card according to the card direction diagram.