KT1123 - Uncategorized Emos - Free user manual and instructions

Product Type	TV Wall Mount (Fixed)
Brand	Emos
Model	KT1123
Material	Steel (Black Metal)
Weight Capacity	Up to 50 kg (110 lbs)
VESA Compatibility	75x75 mm to 600x400 mm
Installation Type	Wall-mounted, fixed position
Suitable Wall Types	Concrete, brick, wood stud
Included Hardware	M4, M5, M6, M8 bolts, concrete anchors, washers, spacers
Tools Required	Phillips screwdriver, drill, 8 mm drill bit, level, pencil
Number of Installers	At least 2 persons recommended
Safety Features	Check for electrical cords/pipes before drilling; use appropriate tools
Maintenance	Clean with a dry cloth; avoid abrasive cleaners
Certifications	CE, RoHS (assumed)

Frequently Asked Questions - KT1123 Emos

What tools are needed to install the Emos KT1123 wall mount?

You will need a Phillips head screwdriver, an electric or portable drill, an 8 mm drill bit (for concrete/wood), and a level. A pencil is also useful for marking holes.

What is the maximum TV size or weight this mount can support?

The mount supports TVs up to 50 kg (110 lbs). However, always verify your TV's weight and VESA pattern compatibility before installation.

Which VESA patterns are compatible with the KT1123?

This universal mount is compatible with VESA patterns ranging from 75x75 mm to 600x400 mm. The included bolts and spacers accommodate various TV back designs.

Can I install this mount on drywall or plasterboard?

While the mount is designed for concrete and brick, it can be used on drywall if you use appropriate anchors (not included). Ensure the wall can support the load, and consider using a stud finder.

Is the KT1123 a tilting or fixed mount?

The KT1123 is a fixed wall mount. Once installed, the TV sits flush against the wall without tilting or swiveling.

How do I ensure the mount is level during installation?

Use a level (preferably included) to mark the holes accurately. Ensure the wall plate is perfectly horizontal before drilling.

What should I check before drilling into the wall?

Always check for electrical cords, gas pipes, or water pipes behind the wall. Use a stud finder or cable detector to avoid hazards.

Can I install this mount outdoors?

This mount is intended for indoor use only. Outdoor installation may lead to corrosion or failure due to weather conditions.

How do I clean and maintain the wall mount?

Wipe the mount with a dry cloth to remove dust. Do not use solvents or abrasive cleaners, as they may damage the finish.

Where can I find replacement hardware if I lose a bolt?

Replacement hardware can be purchased from hardware stores. The mount uses standard metric bolts (M4, M5, M6, M8). Ensure you get the correct length and thread type.

USER MANUAL KT1123 Emos

Black metal structural component with mounting holes and a central internal component, no visible text or symbols

GBV Wall Mount Installation Instructions

Caution:

1. It is recommended for this product to be installed by at least two persons, of which at least one person should be physically fit enough to handle heavy loads and technically skilled.
2. Before installing, please read this manual and make sure that there are no electrical cords, gas or water pipes in the place designated for mounting the holder.
3. We are not responsible for any damage incurred during installation, improper installation or subsequent use.
4. If in doubt, contact your nearest dealer and ask for assistance with installation.
5. For installation it is necessary to use safe and appropriate tools. Disregarding the instructions may cause property damage or injury.
6. If you intend to remove the TV from the wall, always make sure all electrical cords are unplugged.
7. If you are unsure of your wall load, select a different location for your installation or carrying capacity and increase the strength of the wall with renovation.
8. The product can be installed only for flat screen televisions or televisions containing mounting holes and have a flat back wall.

Tools necessary for installation (not included):

Philips Head Screw Driver

Electric or Portable Drill

Drill bit with 8mm in Diameter (for Wood, Concrete, or as needed)

Plaster Board or Chipboard Anchors (as needed)

Pencil

Level (if not included)

Included:

(A) M6×70 Lag Bolt X4 (K) M5×25 Bolt X4
(B) Concrete Anchor or X4 (L) M5 Lock Washer X4
(C) Lag Bolt Washer M8 X4 (M) M6×12 Bolt X4
(D) Small Spacer X4 (N) M6×30 Bolt X4
(E) Large Spacer X4 (0) M6 Lock Washer X4
(F) M6 Washer X4 (P) M8×12 Bolt X4
(G) M4×12 Bolt X4 (Q) M8×30 Bolt X4
(H) M4×25 Bolt X4 (R) MB Lock Washer X 4
(I) M4 Lock Washer X4 (S) M8×20 Bolt X4

(N) vijak M6 × 30, 4 kom

(N) M6 × 30 bultskrüves, 4 gab.

Black metal TV or audio device with vertical supports and a central button (no text or symbols visible)

Empty rectangular frame with three vertical dashed lines (no text or symbols)

Simple line drawing of a wall-mounted fixture with a screw and circular component (no text or symbols)

Choose the proper bolts for installation. / Pro instalaci zvolte správný typ šroubů. / Pre inštaláciu vyberte správny typ skrutiek. / Do instalacji wybieramy odpowiedni typ šrub. / A szereléshez használja a megfelelő típusú és méretű csavarokat. / Za instalacijo izberite primeren tip vijakov. / Za montažu odabrati odgovarajuću vrstu vijaka. / Für die Befestigung die richtigen Schrauben auswählen. / Для установки виберіть правильний тип гвинтів. / Pentru instalare alegeți tipul adecvat de şuruburi. / Pasirinkite montavimui reikiamus varžtus. / Izvēlieties uzstādīšanai piemērotas bultskrūves.

Diagram of a monitor mounted on a wall with two screwdrivers, no text or symbols present

Tighten the screw to lock the display plate on the wall plate. / Utáhněte šrouby pro uzamčení monitoru k nástěnné desce. / Utahnite skrutky pre uzamknutie monitora k nástennej doske. / Dokrećamy šruby mocujące odbiornik do plyty naściennej. / Húzza meg a csavart, hogy a képernyő panel a fali panelre szoruljo. / Za zaklenitev položaja monitorja na stenski plošči privijte vijake. / Zategnite vijke kako bi fiksirali televizor (monitor) u odnosu na zidnu ploču. / Die Schrauben für das Verschließen des Bildschirms an der Wandplatte festziehen. / Затягніть гвинти, щоб зафіксувати монітор до дошки на стіні. / Strångeti şuruburile pentru blocarea poziției ecranului la placa de perete. / Priveržkite varztą ir užfiksuoikite ekrano plokštę prie sieninės plokštės. / Pievelciet skrūvi, lai nostiprinātu ekrāna plăksni pie sienas plăksnes.

GB Installing the Wall Mount
CZ Instalace držáku na zed'
SK Inštalácia držiaka na stenu
PL Instalacja uchwytu na ścianie
HU A falikonzol felszerelése
SI Instalacija stenskega nosilca
RS|HR|BA Montaža nosača na zid
DE Montage des Halters an die Wand
UA Установка кронштейна на стіну
RO Instalarea suportului pe perete
LT Kaip pritvirtinti sieninj laikiklj
LV Sienas stiprinājuma uzstādīšana

Black metal TV or audio device with vertical supports and a central button (no text or symbols visible)

Pure brick wall pattern with no text, numbers, or symbols

Concrete – Brick Installation / Instalace – zděná stavba / Inštalácia – murovaná stavba / Instalacja – ściana murowana / Beton – téglafalra való szerelvény / Instalacija – zidana gradnja / Montaža – zidani objekt / Installation – gemauerter Bau / Монтаж – цегляна конструкция / Instalare – construcție zidită / Montavimas ant betono – plytu sienos / Uzstādīšana pie betona – kieğellem

1

Pure architectural line drawing of a brick wall with no text, numbers, or symbols

Simple line drawing of a wall-mounted panel with a circular component and a pin, no text or symbols present.

Choose the proper bolts for installation. / Pro instalaci zvolte správný typ šroubů. / Pre inštaláciu vyberte správny typ skrutiek. / Do instalacji wybieramy odpowiedni typ śrub. / A szereléshez használja a megfelelő típusú és méretű csavarokat. / Za instalacijo izberite primeren tip vijakov. / Za montažu odabrati odgovarajuću vrstu vijaka. / Für die Befestigung die richtigen Schrauben auswählen. / Для установки виберіть правильний тип гвинтів. / Pentru instalare alegeți tipul adecvat de şuruburi. / Pasirinkite montavimui reikiamus varztus. / Izvēlieties uzstādīšanai piemērotas bultskrūves.

Diagram of a device panel with two connectors and two screwdrivers, no text or symbols present

Tighten the screw to lock the display plate on the wall plate. / Utáhněte šrouby pro uzamčení monitoru k nástěnné desce. / Utiahnite skrutky pre uzamknutie monitora k nástennej doske. / Dokrećamy šruby mocujace odbiornik do płyty naściennej. / Húzza meg a csavart, hogy a képernyő panel a fali panelre szoruljo. / Za zaklenitev položaja monitorja na stenski plošči privijte vijake. / Zategnite vijke kako bi fiksirali televizor (monitor) u odnosu na zidnu ploču. / Die Schrauben für das Verschließen des Bildschirms an der Wandplatte festziehen. / Затягніть гвинти, щоб зафіксувати монітор до дошки на стіні. / Strângeți şuruburile pentru blocarea poziției ecranului la placa de perete. / Priveržkite varžta ir užfiksuokite ekrano plokšte prie sieninės plokštės. / Pievelciet skrūvi, lai nostiprinātu ekrāna plâksni pie sienas plâksnes.

SI ARANCIJSKA IZJAVA