FSB050WW8E - Freezer HYUNDAI - Free user manual and instructions

Type	Freezer
Brand	Hyundai
Model	FSB050WW8E
Energy Efficiency Class	A+
Capacity	50 liters
Dimensions (H x W x D)	850 x 550 x 650 mm
Weight	30 kg
Power Consumption	100 kWh/year
Voltage / Frequency	220-240 V / 50 Hz
Climate Class	SN-T
Defrost Type	Manual
Temperature Control	Mechanical thermostat
Interior Light	No
Door Alarm	No
Lock	Yes
Handle	Recessed
Casters	No (feet)
Reversible Door	No
Refrigerant	R600a
Noise Level	42 dB
Warranty	2 years

Frequently Asked Questions - FSB050WW8E HYUNDAI

What is the ideal temperature setting for my freezer?

The recommended temperature for freezing food is -18°C or lower. Use the thermostat dial to adjust.

How long can food be stored during a power failure?

A fully loaded freezer can keep food frozen for about 24 hours if the door remains closed. Avoid opening the door.

How do I defrost my Hyundai freezer?

Unplug the freezer, remove all food, and leave the door open. Place towels to absorb water. Do not use sharp tools to remove ice.

How often should I clean the freezer?

Clean the interior every 3-4 months with a mild detergent and warm water. Rinse and dry thoroughly.

What should I do if the door seal is loose?

Check for debris or damage. Clean the gasket with warm water. If still loose, contact Hyundai support for replacement.

Why is my freezer making unusual noises?

Normal sounds include clicking (compressor start), gurgling (refrigerant flow), and humming (fan). If loud, ensure it is level and away from walls.

Can I install the freezer in an unheated garage?

Yes, if the ambient temperature is within the climate class range (SN-T: +10°C to +43°C). Avoid extremely cold temperatures.

How can I save energy with my freezer?

Keep it full (but not overpacked), allow hot food to cool before storing, and ensure the door seals properly. Defrost regularly to maintain efficiency.

What is the capacity of the Hyundai FSB050WW8E?

This freezer has a net capacity of 50 liters, suitable for small households or additional storage.

Does the freezer have a lock?

Yes, the Hyundai FSB050WW8E is equipped with a lock to secure the contents. Use the supplied key.

USER MANUAL FSB050WW8E HYUNDAI

White refrigerator with open door showing three food containers (cups, milk carton, and rolled dough) inside (no visible text or symbols)

NÁVOD K POUŽITÍ NÁVOD NA POUŽITIE INSTRUKCJA OBSŁUGI INSTRUCTION MANUAL HASZNÁLATI UTASÍTÁS

CHLADNIČKA CHLADNIČKA REFRIGERATOR LODÓWKA HÚTŐSZEKRÉNY

GENUINE PRODUCT OF HYUNDAI CORPORATION

1. VŠEOBECNÉ BEZPEČNOSTNÍ POKYNY

Simple line drawing of a mechanical lever with a handle and a downward arrow indicating motion (no text or symbols)

Technical line drawing of a mechanical assembly with a tool and component (no text or symbols)

Pure mechanical diagram showing a lever mechanism with no text or symbols

Pure geometric diagram showing a curved dashed line and two marked points on a rectangular base (no text or symbols)

Technical line drawing of a mechanical assembly with two circular insets showing rotational components (no text or symbols)

CZ

Technical diagram showing mechanical assembly with two circular insets illustrating rotational motion (no text or symbols)

Technical line drawing of a mechanical assembly with a circular inset showing a rotating component (no text or symbols)

Line drawing of a mechanical component with two downward arrows indicating features (no text or symbols)

graph LR
    A["Left Refrigerator"] --> B["Right Refrigerator"]
    B --> C["Left Refrigerator with Control Valve"]
    C --> D["Right Refrigerator with Control Valve"]

8. VAROVÁNÍ

VAROVÁNÍ: NEVYSTAVUJTE SPOTŘEBIČ DEŠTI NEBO VLHKOSTI ABYSTE PŘEDEŠLI VZNIKU POŽÁRU NEBO ÚRAZU ELEKTRICKÝM PROUDEM. VŽDY SPOTŘEBIČ VYPNĚTE ZE ZÁSUVKY KDYŽ JEJ NEPOUŽÍVÁTE NEBO PŘED OPRAVOU. V PŘÍSTROJI NEJSOU ŽÁDNÉ ČÁSTI OPRAVITELNÉ SPOTŘEBITELEM. VŽDY SE OBRACEJTE NA KVALIFIKOVANÝ AUTORIZOVANÝ SERVIS. PŘÍSTROJ JE POD NEBEZPEČNÝM NAPĚTÍM.

1. BEZPEČNOSTNÉ INFORMÁCIE

1. Skriňa
2. Polica
3. Termostat

(zo zadnej strany skrine)

1. Stavitel'ná nožka
2. Kryt závesu dverí
3. Dvere
4. Tesnenie

Simple line drawing of a mechanical lever with a handle and a downward arrow indicating motion (no text or symbols)

Technical line drawing of a mechanical assembly with a tool and component (no text or symbols)

Pure mechanical diagram showing a lever mechanism with a downward arrow, no text or symbols present

Pure geometric diagram showing a curved dashed line and two marked points on a rectangular base (no text or symbols)

Technical diagram showing mechanical assembly with two views of a bracket and a tool, no text or symbols present.

Technical diagram showing mechanical assembly with two circular insets illustrating rotational motion (no text or symbols)

Technical line drawing of a mechanical assembly with a circular inset showing a rotating component (no text or symbols)

Line drawing of a mechanical component with two downward arrows indicating force or movement (no text or symbols)

A 440 mm

B 470 mm

C 510 mm

D 50 mm

E 50 mm

F 50 mm

G 880 mm

H 910 mm

Vyrovnanie spotrebiča

8. VAROVANIE

VAROVANIE: NEVYSTAVUJTE SPOTREBIČ DAŽĐU ALEBO VLHKOSTI, ABY STE PREDIŠLI VZNIKU POŽIARU ALEBO ÚRAZU ELEKTRICKÝM PRÚDOM. PRED OPRAVOU ALEBO VŽDY, KEĎ SPOTREBIČ NEPOUŽÍVATE, VYPNITE HO ZO ZÁSUVKY V PRÍSTROJI NIESÚ ŽIADNE ČASTI OPRAVITEĽNÉ SPOTREBITELOM. VŽDY SA OBRACAJTE NA KVALIFIKOVANÝ AUTORIZOVANÝ SERVIS. SPOTREBIČ JE POD NEBEZPEČNÝM NAPÄTÍM.

1. SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.

- For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given super vision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances with adult supervision.

- Children should be supervised to ensure that they do not play with the appliance.

- Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.

- Keep all packaging well away from children. There is risk of suffocation.

☐ If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.

- If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lack unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

WARNING!

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING!

Do not damage the refrigerant circuit.

WARNING!

Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacture.

WARNING!

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING!

Do not touch the light bulb if it has been on for a long period of time because it could be very hot. ^1)

WARNING!

When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING!

Do not locate multiple portable socket-outlets or portable power suppliers at the rear of the appliance.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  ☐ The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
  During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.
• avoid open flames and sources of ignition
• thoroughly ventilate the room in which the appliance is situated

- This appliance is intended to be used in household and similar applications such as:

• staff kitchen areas in shops, offices and other working environments
• farm houses and by clients in hotels, motels and other residential type environments
• bed and breakfast type environments
• catering and similar non-retail applications.

☐ This appliance is heavy. Care should be taken when moving it.

- Avoid prolonged exposure of the appliance to direct sunlight.

WARNING!

Any electrical components(plug, power cord, compressor and etc.) must be replaced by a certified service agent or qualified service personnel.

WARNING!

The light bulb supplied with this appliance is a “special use lamp bulb” usable only with the appliance supplied. This “special use lamp” is not usable for domestic lighting. ^1)

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.

• Power cord must not be lengthened.
• Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances.
• Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.
  ☐ Make sure that you can come to the mains plug of the appliance.
  ☐ Do not pull the mains cable.
  ☐ If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.

Daily use

☐ Do not put hot on the plastic parts in the appliance.
- Do not place heavy objects or electrical appliances on the top of the refrigerator.
- Do not place food products directly against the rear wall.
- Frozen food must not be re-frozen once it has been thawed out.
- Store pre-packed frozen food in accordance with the frozen food, manufactures instructions. ^2)
- Appliance s manufactures storage recommendations should be strictly adhered to. Refer to relevant instructions.
- Do not place carbonated of fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. ^2)
☐ Ice lollies can cause frost burns if consumed straight from the appliance. ^2)
- Do not touch the cooled surfaces while the appliance operates, especially not with wet hands, because the skin may stick to the cold surfaces.

To avoid contamination of food, please respect following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces, that can come into contact with food and accessible drainage systems.
• Clean water tanks, if they have not been used for 48 h, flush the water system connected to a water supply, if water has not been drawn for 5 days (if they are presented in the appliance).
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments (if they are presented in the appliance) are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
• One-, two- and three-star compartments (if they are presented in theAppliance) are not suitable for freezing of fresh food.
  ☐ If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

Care and cleaning

Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.

• Do not clean the appliance with metal objects.
  ☐ Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. ^2)
• Regularly examine the drain in the refrigerator for condensate. If necessary, clean the drain. If the drain is blocked, water will collect in te bottom of the appliance.

Installation

IMPORTANT!

For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the refrigerant to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
• Wherever possible the spacers of the product should be against a wall to avoid touching or catching warm parts (compressor, con-denser) to prevent possible burn.
  ☐ The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.

IMPORTANT!

Do not place the appliance in direct sunlight, to places with high temperature or high humidity.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
  ☐ This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.

Energysaving

• Don’t put hot food in the appliance
• Don’t pack food close together as this prevents air circulating
• Make sure food don’t touch the back of the compartment(s)
• If electricity goes off, don’t open the door(s)
• Don’t open the door(s) frequently
• Don’t keep the door(s) open for too long time
• Don’t set the thermostat on exceeding cold temperatures
  ☐ All drawers, shelves and door compartments should be placed in their position for the lowest possible energy consumption.

Environment protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used on this appliance marked by the symbol 🌐 are recyclable.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging materials

The materials with the symbol are recyclable. Dispose the packaging in a suitable collection containers to recycle it.

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.
2. Cut off the mains cable and discard it.

WARNING! During using, service and disposal the appliance, please pay attention to symbol similar as left side, which is located on rear of appliance (rear panel or compressor) and with yellow or orange color. It's risk of fire warning symbol. There are flammable materials in refrigerant pipes and compressor. Please be far away fire source during using, service and disposal.

2. OVERVIEW

1. Cabinet
2. Shelf
3. ThermostatKnob (at the back of cabinet)
4. Adjustable Foot
5. Hinge Cover
6. Door
7. Gasket

Note: Above picture is for reference only. Real appliance may be a little bit different.

3. REVERSE DOOR

Tool required: philips screwdriver, flat bladed screwdriver, hexagonal spanner.

• Ensure the unit is unplugged and empty.
  • To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.

• It's better that 2 people handle the unit during assembly.

• Carefully remove the top hinge cover with a flat screw driver.

Simple line drawing of a mechanical lever with a handle and a pull rod, no text or symbols present

EN

1. Unscrew the top hinge with a philiphs screw driver.

2. Remove the hole cover with a flat screw driver.

3. Move the core cover from left side to right side. And then lift the upper door and place it on a padded surface to prevent it from scratching.

4. Lie down the rear of cabinet on a soft pad. And unscrew the bottom hinge and leveling foot.

5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

Technical line drawing of a mechanical assembly with a tool and base component (no text or symbols)

Technical line drawing of a mechanical lever assembly with a pull rod and pivot (no text or symbols)

Pure geometric diagram showing a curved dashed line and two marked points on a rectangular base (no text or symbols)

Technical line drawing of a mechanical assembly with two circular insets showing rotational components (no text or symbols)

1. Install the hinge at left side and foot base at right side. Then screw two leveling feet with their original parts.

Technical diagram showing mechanical assembly with two circular insets illustrating rotational motion (no text or symbols)

1. Detach the Fridge and the Freezer door gaskets and then attach them after rotating.

graph TD
    A["Document"] --> B{Processing}
    B -->|Return| C["Output"]
    B -->|Fail| D["Reject"]

1. Stand up the unit and put the door on the bottom hinge. Make sure the bottom hinge core is inserted in the door hole. Install the door with the upper hinge.

Technical line drawing of a mechanical assembly with a circular component and a rotating knob (no text or symbols)

1. Clap in the hinge cover and hole cover on the top of unit.

Line drawing of a mechanical component with two arrows indicating downward force or alignment (no text or symbols)

Install door external handle (if external handle is present)

graph LR
    A["Left refrigerator"] --> B["Right refrigerator"]
    B --> C["Downward arrow to right panel"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

Space Requirement

• Keep enough space of door open.
• Keep at least 50mm gap at two sides.

A 440 mm

B 470 mm

C 510 mm

D 50 mm

E 50 mm

F 50 mm

G 880 mm

H 910 mm

Leveling the unit

• To do this adjust the two leveling feet at front of the unit.
- If the unit is not level, the doors and magnetic seal alignments will not be covered properly..

Note: Above pictures are for reference only.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance. For refrigerating appliances with climate class:

• extended temperate: 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C (SN)
• temperate: 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C (N)
• subtropical: 'this refrigerating appliance is intended to be used at ambient

temperatures ranging from 16 °C to 38 °C (ST)

- tropical: 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C (T)

This appliance is not intended for use at altitudes exceeding 2000 m.

This device is designed for climate classes N, ST or ambient temperatures of 16 - 38 °C.

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabi-net and the wall unit must be at least 100 mm. Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate leveling is ensured by one or more adjust-able feet at the base of the cabinet. This refrigerating appliance is not intended to be used as a built-in appliance.

4. INSTRUCTIONS FOR USE

First use / cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.

IMPORTANT!

Do not use detergents or abrasive powders, as these will damage the finish.

Setting The Temperature Control

- Plug on your appliance. The internal temperature is controlled by a thermostat.

*MIN: is warmest setting

*MAX: is coldest setting;

*OFF: is off.

- The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often.

Temperature setting recommendation

Environment temperature Freezer compartment
Warmer(29°C and higher)

Environment temperature Freezer compartment
Normal(21°C - 28°C)
Colder(20°C and lower)

Impact on food storage

• Storage time may be reduced if the appliance is set up differently.
- The best storage time in the freezer with the recommended setting follows:

Meat and fish Preparation		Maximum Storing time (month)	Thawing time in room temperature (hours)
Steak Wrapping in a foil 6-10 1-2
Lamb meat Wrapping in a foil 6-8 1-2
Veal roast Wrapping in a foil 6-10 1-2
Veal cubes In small pieces 6-10 1-2
Lamb cubes	In pieces	4-8 2-3
Minced meat	In packages without using spices	1-3 2-3
Giblets (pieces)	In pieces	1-3 1-2
Bologna sausage/salami	Should be packaged even if it has membrane		Until thawed
Chicken and turkey	Wrapping in a foil 7-8	10-12
Goose and Duck	Wrapping in a foil 4-8		10
Deer, Rabbit, Wild Boar	In 2.5 kg portions and as fillets	9-12	10-12
Fresshwater fishes (Salmon, Carp, Cra- ne, Siluroidea)	After cleaning the bowels and scales of the fish, wash and dry it; and if necessary, cut off the tail and head.	2	To the fullest thawing
Lean fish; bass, turbot, flounder		4-8	To the fullest thawing
Fatty fishes (Tunny, Mackarel, bluefish, anchovy)		2-4	To the fullest thawing
Shellfish Cleaned and	in bags 4-6		To the fullest thawing
Caviar	In its package, aluminium or plastic container	2-3	To the fullest thawing
Snails	In salty water, aluminum or plastic container	3	To the fullest thawing

Vegetables and Fruits	Preparation	Maximum Storing time (month)	Thawing time in room temperature (hours)
Cauliflower	Take the leaves apart, cut the heart into pieces, and leave it in water with a little lemon juice for a while	10-12 Can be used frozen
String beans and beans	Wash and cut into small pieces and boil in water	10-13 Can be used frozen
Beans, pea	Hull and wash and boil in water	12 Can be used frozen
Mushrooms and asparagus	Wash and cut into small pieces	6-9 Can be used frozen
Cabbage	Cleaned and boil in water	6-8 2
Eggplant	Cut to pieces of 2cm after washing	10-12 Separate the slices
Corn	Clean and pack with its stem or as sweet corn	12 Can be used frozen
Carrot	Clean and cut to slices and boil in water	12 Can be used frozen
Pepper	Cut the stem, cut into two pieces, remove the core and boil in water	8-10 Can be used frozen
Spinach	Washed and boil in water	6-9 2
Apple and pear Peel and slice 8-10 (in the fridge)		5
Apricot and Peach	Cut into two pieces and remove the stone	4-6 (in the fridge)	4
Strawberry and Blackberry	Wash and hull 8-12 2
Cooked fruits	Adding 10 % of sugar in the container	12	4
Plum, cherry, sourberry	Wash and hull the stems	8-12 5-7

	Maximum Storing time (months)	Thawing time in room temperature (hours)	Thawing time in oven (minutes)
Bread	4-6	2-3	4-5 (220-225°C)
Biscuits	3-6	1-1,5	5-8 (190-200 °C)
Pastry	1-3	2-3	5-10 (200-225 °C)
Pie	1-1,5	3-4 5-8 (190-200 °C)
Phyllo dough	2-3	1-1,5	5-8 (190-200 °C)
Pizza	2-3	2-4	15-20 (200 °C)

Freezing fresh food

• The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
• Place the fresh food to be frozen in the bottom compartment (if the appliance contains more than one partition in the freezer).
• The maximum amount of food that can be frozen in 24 hours is specified on the rating plate.

Storing frozen food

When first starting-up or after a period out of use. Before putting the product in the compartment let the appliance be set in super freezing mode (if available on your appliance).

IMPORTANT!

In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time” (see:“Time of storage in case of the power interruption…), the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked).

Thawing

Deep-frozen or frozen food, prior to be used, can be thawed in the freezer compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer.

Ice-cub

This appliance may be equipped with one or more trays for the production of ice-cubes.

Helpful hints and tips

To help you make the most of the freezing process, here are some important hints:

• The maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate;
• The freezing process takes 24 hours. No further food to be frozen should be added during this period;
• Only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
• Wrap up the food in aluminium foil or polythene and make sure that the packages are airtight;
• Do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter;
• Lean foods store better and longer than fatty ones; salt reduces the storage life of food;
• Water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
• It is advisable to show the freezing in date on each individual pack to enable you removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
• It is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.

Hints for storage of frozen food

• To obtain the best performance from this appliance, you should:
• Make sure that the commercially frozen foodstuffs were adequately stored by the retailer;
• Be sure that frozen foodstuffs are transferred from the food store to the freezer in the shortest possible time;
• Not open the door frequently or leave it open longer than absolutely necessary.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.
• Do not exceed the storage period indicated by the food manufacture.

Recommended location of each type of food for long-term storage in different compartments of the freezer (if included in your appliance - and taking into account the actual number of drawers / shelves in the freezer):

Refrigerator compartments Type of food
Bottom drawer/shelf raw meat, poultry, fish
Middle drawer/shelf frozen vegetables, chips
Top drawer/shelf ice cream, frozen fruit, frozen baked goods

Cleaning

- For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.

CAUTION!

The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapors can lead to the damage of plastic parts. The appliance must be dry before it is placed back into service.

IMPORTANT!

Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice form orange peel, butyric acid, cleanser that contain acetic acid.

• Do not allow such substances to come into contact the appliance parts.
• Do not use any abrasive cleaners
• Remove the food from the freezer. Store them in a cool place, well covered.
• Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse.
• Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
  • After everything is dry place appliance back into service.

Defrosting of the freezer

The freezer compartment, however, will become progressively covered with frost. This should be removed. Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out as fellows:

• Pull out the plug from the socket;
• Remove all stored food, wrap it in several layers of newspaper and put it in a cool place;
• Keep the door open, and placing a basin underneath of the appliance to collect the defrost water;
• When defrosting is completed, dry the interior thoroughly
• Replace the plug in the power socket to run the appliance again.
• The internal light is a LED type. To replace the lamp, please contact qualified technician.

5. TROUBLESHOOTING

CAUTION!

Before troubleshooting, disconnect the power supply. Only a qualified electrician of competent person must do the troubleshooting that is not in this manual.

IMPORTANT!

There are some sounds during normal use (compressor, refrigerant circulation). These sounds are not a reason for complaint!

Problem Possible cause Solution
Appliance does not work	Temperature regulation knob is set at number “OFF”.	Set the knob at other number to switch on the appliance.
	Mains plug is not plugged in or is loose.	Insert mains plug.
	Fuse has blown or is defective (circuit breaker is OFF).	Check fuse, replace if necessary (switch ON the circuit breaker).
	Socket is defective	Mains malfunctions are to be corrected by an electrician.
The food is too warm.	Temperature is not properly adjusted.	Please look in the initial Temperature Setting section.
	Door was open for an extended period.	Open the door only as long as necessary.
	A large quantity of warm food was placed in the appliance within the last 24 hours.	Turn the temperature regulation to a colder setting temporarily.
	The appliance is near a heat source.	Please look in the installation location section.
Appliance cools too much	Temperature is set too cold.	Turn the temperature regulation knob to a warmer setting temporarily.
Unusual noises	Appliance is not level. Re-adjusted	the feet.
	The appliance is touching the wall or other objects.	Move the appliance slightly.
	A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.	If necessary, carefully bend the component out of the way.
Side panel is hot Condenser is inside the panel. It's normal.

6. TECHNICAL DATA

• Technical information can be found on the type plate inside the appliance (or on its back side) and on the energy label.
• "Information Sheet" and "Directions for Use" can be downloaded at: www.hyundai-electronics.cz.
• QR code on the energy label supplied with the appliance provides a web link to information concerning the specification of this appliance in the EU EPREL database.
• Keep the energy label together with user manual and all other documentation supplied with this appliance.
• The same information in the EPREL database can also be found at: https://eprel.ec.europa.eu
• The model name (product number) can be found on the type plate of the appliance and also on the energy label supplied with the appliance.
  • We reserve the right to change technical specifications.

7. CUSTOMER CARE AND SERVICE

• Always use original spare parts.
- When contacting our authorised service or information line, make sure you have the following information available: the model name (product number) and serial number (SN).
- This information can be found on the type plate (or on a separate label near it).
- The manufacturer reserves the right for change without prior notice.
- Original spare parts for particular selected components of the product are available at least 7 or 10 years from the launch of the last piece of the appliance on the market (depending on the type of the component).

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to expiration of the right to repair!

The information regarding warranty and product repairs you can find on the website www.hyundai-electronics.cz/servis-eu

8. WARNING

WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON'T USE IT OR BEFORE A REVISION. THERE AREN'T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.

1. WSKAZÓWKI BEZPIECZEŃSTWA

Simple line drawing of a mechanical lever with a handle and a pull rod, no text or symbols present

Technical line drawing of a mechanical assembly with a tool and base plate (no text or symbols)

Pure mechanical diagram showing a lever mechanism with no text or symbols

Pure geometric diagram showing a curved line with dashed extension and two marked points (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly with circular insets showing rotational motion (no text or symbols)

Technical diagram showing mechanical assembly with two circular insets illustrating rotational motion (no text or symbols)

Abstract diagram of a document with arrows indicating rotational movement (no text or symbols)

Technical line drawing of a mechanical assembly with a circular inset showing a rotating component (no text or symbols)

Simple line drawing of a rectangular object with two downward arrows indicating direction (no text or symbols)

graph LR
    A[" "] --> B[" "]
    B --> C[" "]
    C --> D[" "]

A 440 mm

B 470 mm

C 510 mm

D 50 mm

E 50 mm

F 50 mm

G 880 mm

H 910 mm

8. OSTRZEŻENIE

OSTRZEŻENIE: ABY UNIKNAĆ NIEBEZPIECZEŃSTWA POŻARU LUB PORAŻENIA PRĄDEM ELEKTRYCZNYM, NIE WOLNO WYSTAWIAĆ SPRZĘTU NA DZIAŁANIE DESZCZU BADŹ WILGOCI. URZĄDZENIE ODBIORCZE ZAWSZE WYŁĄCZYĆ Z GNIAZDKA, KIEDY NIE JEST UŻYWANE LUB PRZED NAPRAWA.W URZĄDZENIU NIE MA ŻADNYCH CZĘŚCI, KTÓRE BY MÓGŁ ODBIORCASAMODZIELNIE NAPRAWIAĆ. NAPRAWĘ SPRZĘTU NALEŻY ZLECIĆ ODPOWIEDNIO PRZYGOTOWANEMU SERWISU AUTORYZACYJNEMU. URZĄDZENIE ZNAJDUJE SIĘ POD NIEBEZPIECZNYM NAPIĘCIEM.

1. BIZTONSÁGI INFORMÁCIÓK

Simple line drawing of a mechanical lever with a handle and a pull rod, no text or symbols present

Technical line drawing of a mechanical assembly with a tool and component (no text or symbols)

Pure mechanical diagram showing a lever mechanism with no text or symbols

Pure geometric diagram showing a curved line with dashed extension and two marked points (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly with circular insets showing rotational motion (no text or symbols)

Technical diagram showing mechanical assembly with two circular insets illustrating rotational motion (no text or symbols)

Technical line drawing of a mechanical assembly with a circular inset showing a rotating component (no text or symbols)

Line drawing of a mechanical component with two downward arrows indicating force or movement (no text or symbols)

A 440 mm

B 470 mm

C 510 mm

D 50 mm

E 50 mm

F 50 mm

G 880 mm

H 910 mm

Hely

8. FIGYELEM

FIGYELEM: TÜZ VAGY ÁRAMÜTÉS ELKERÜLÉSE ÉRDEKÉBEN NE TEGYE KI A KÉSZÜLÉKET ESÖ VAGY NEDVESSEG HATÁSÁNAK. HASZNÁLATON KÍVÜL VAGY JAVÍTÁS ELÖTT MINDIG HÚZZA KI A KÉSZÜLÉKET AZ ELEKTROMOS HÁLÓZATBÓL. A KÉSZÜLÉK NEM TARTALMAZ A FELHASZNÁLÓ ÁLTAL JAVÍTHATÓ ALKATRÉSZEKET. MINDIG FORDULJON SZAKSZERVIZHEZ. A KÉSZÜLÉK VESZÉLYES FESZÜLTSÉG ALATT VAN.

HYUNDAI

Licensed by HYUNDAI Corporation Holdings, Korea Imported by ETA a.s., náměstí Práce 2523, 760 01 Zlín, CZ