E-5 - Digital SLR Camera OLYMPUS - Free user manual and instructions

USER MANUAL E-5 OLYMPUS

V7 E-P5_Cover Masterfm Page 1 Friday, December 3, 2010 3:09 PM OLYMPUS : DIGITAL CAMERA OLYMPUS {l | — 7]

OLYMPUS EUROPA HOLDING GMBH

Premises Consumer Product Division Wendenstrasse 14 - 18, 20097 Hamburg, Germany Tel.: +49 40 - 23 77 3-0 / Fax: 449 40 - 23 07 61 Basic guide P.2 5 Revieu the camera partnames, the Goods delivery: Bredowstrasse 20, 22113 Hamburg, Germany 3 IN S TR U C T 10 N basic steps for shooting and playback, Letters Postfach 10 49 08, 20034 Hamburg, Germany ü and the basic operations European Technical Customer Support 3 MANUAL Table of Contents P.23 Please visit our homepage http:/Mmww.olympus-europa.com or call our TOLL FREE NUMBER: 00800 - 67 10 83 00 S for Austria, Belgium, Denmark, Finland, France, Germany, Luxemburg, Netherlands, sl Norway, Portugal, Spain, Sweden, Swilzertand, United Kingdom

• Please note some (mobile) phone services / provider do not permit access or request an © additional prefix to +800 numbers. zZ For all notlisted European Countries and in case that you can't get connected to the above mentioned number please make use ofthe folowing CHARGE D NUMBERS: 449 180 5 - 67 10 83 or +49 40 - 237 73 48 99. 2 Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday) E £ > 7 < F <@> Authorized Distributors : Olympus Service Department South Africa: Tudor Photographic Olympus Imaging & Audio Ah foor, Park on Long Keyhed House 66 Long Street Stock Road Cape Toun 8001 Southend-on-Sea South Africa Essex Tek 427 (0) 21 423 4150 552 50H Fac +27 (0) 21 424 4632 United Kingdom Sales - 0800 112 4777 Service - 0800 111 4888 Facsimile - 444 (0)1702 445134 emal - consumer@ olympus. co.uk Ar OIympUS. Cou Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions careful to enjoy optimum perfommance and a longer service life. o Keep this manual in a safe place for future reference Ë «We recommend that you take test shots to get accusiomed to your camera before taking important < photographs z «The screen and camera ilustrations shown in this manual were produced during the development i stages and may difer from the actual product. é «The contents in this manual are based on firmware version 1.0 for this camera. Ifthere are addition © 2010 OLYMPUS IMAGING CORP. ü andJor modification of functions due to fimware update for the camera, the contents wil differ, For the latest information, please visitthe Olympus website. 0E - E0462627 ; 4 Register our product on wuolympus-consumer.comiregister and get additional benefits rom Olympus! 2 SZ NA

4 À 97 50033 e_00_0_unified.book Page 4 Sunday, December 5, 2010 2:59 PM S 24 æ Î Viewfind | Shutter speed Number of storable ar ES P.79 {an 4 ISO sensitivity 4 Flashintensity control AE confematon mat zona level ncicator EP. 110 {blinks: charging in progress, lights up: charging completed)

Ed 97 50033 e_00_0_unified.book Page 6 Sunday, December 5, 2010 2:59 PM

| Super control panel The following screen allows the display and setting of shooting settings at the same time and is called the super control panel. Press the INFO button to display the super control panel on the LCD monitor. LS *Settng while looking atthe super control panel" (P. 21) MYSET ESP. 100 Flash charging LP. 76 Battery check EP. Shooting mode — LFP 4145 Date SP. 14 Shutter speed ESP. 41-45 Exposure compensation indicator ESP. 47 Exposure level indicator EP. 44 Flash intensity control indicator EP. 76 Mutiple exposure E3 ESP. 51 Super FP flash (D UP. 79 Noise reduction TEA LP. 72 Auto bracket EL@B LP. 49, 51, 69, 77 Internal temperature warning Ma'c/'F UP. 133 Aperture value ES P.4145 — Exposure compensation value LP. 47 Exposure level LP. 44 1 picture mode EP. 70 Image stabiizer LP. 62 LP. 59-60 White balance ESP. 66 White balance compensation LP. 68

7” 0033. e_00_0_unified.book Page 7 Sunday, December 5, 2010 2:59 PM

& 50033_e_00_0_unified.book Page 9 Sunday, December 5, 2010 2:59 PM

Î U kthe b tents The following items are included with the camera. Ifanything is missing or damaged, contactthe dealer from whom you purchased the camera. ion battery BCM-5 Lithium ion USB cable AV cable (Monaural) Attaching the strap Thread the strap as Last, pullthe strap tight Attach the ather end of indicated by the making sure that it is the strap t the other arrows (®, @). fastened securely (®). evelet in the same way.

Là & 50033 e_00_0_unified.book Page 10 Sunday, December 5, 2010 2:59 PM

prenais the battery | P charging the battery Remove the protection cap from the battery, BLM-S Lithium ion battery AC cable

Amber gt: Charging in progress OFF Charging completed AC wall outlet {Charging time: Approx. 35 hours) | BCM-5 Lithium Amber binking: Charging error ion charger 2° Loading the battery Batery contact Emi Battery compartment cover Battery compartiment lock 3° close the battery compartment cover and slide the battery compartment lock in the direction of © Battery lock Unloading the battery Press the battery lock to unlock the battery. Turn the camera upside-down to remove the battery. Itis recommended to set aside a backup battery for prolonged shooting in case the battery. in use drains.

& 50033 e_00_0_unified.book Page 11 Sunday, December 5, 2010 2:59 PM

pAtachin a lens to the camera 1” Remove the body cap from the camera and the rear cap from the lens Rear cap Body cap 2° attach a lens to the camera Lens atachment Alignment mark (Red) mark (Red) + Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera's body (CL). + Rotate the lens in the direction indicated by the arrow until you hear it click ((2)). + Make sure the power switch is setto OFF + Do not press the lens release button. 3° Remove the lens cap

Removing the lens from the camera While pressing the lens release button {@, rotate the lens in the direction of the arrow ((2)) + Make sure the power switch is Lens release button setto OFF

Là & 50033 e_00_0_unified.book Page 12 Sunday, December 5, 2010 2:59 PM ds N poadino the card Compact Flash SD Card Open the card cover ((1), 2). Open the card cover (©), @). Insertthe CF card (referred t as ‘card”inthese … Insertthe SD/SDHC/SDXC card (referred to instructions) into the slot as far as itcan go (S). 35 “card” in these instructions) untilitlocks in place (@). Card cover Connector Card access lamp CF card slot. Front side N R th Never open the card cover while the card N e ‘emoving the cai access lamp is blinking. 7 Compact Flash SD Card + Press the eject button all the way in to + Press the inserted card lightly and it will be make it pop out. ejected. + Pull outthe card. + Pull out the card. Card access lamp Eject button + Tum offthe camera before loading or removing the card. + The power is tumed off if you load or remove the card with the power on.

EVA dan É. 5 | 7 0033 e 00 0 unified.book Page 13 Sunday, December 5, 2010 2:59 PM

@ p Ÿ Setthe camera's power switch to ON 8 + To tum offthe power, setthe power switch to OFF. a LIGHT button Control panel & Turns the control panel lighton When the camera is and off. turned on, the battery [A1 checkis displayed on the control panel. Lit up (ready for use) Ê Litup (battery power is low) Ê Blinks (charging required)

Dust reduction function operation ÿ The dust reduction function is automatically activated when the camera is turned on. Ultrasonic à vibrations are used to remove dust and dirt from the image pickup device's filter surface. un u Vieufinder Adjusting the viewfinder's 8 diopter ÿ P 3 u ä Adjust the viewfinder diopter in accordance with your vision. While looking through the viewfinder, rotate the diopter adjustment dial little by lite. NW] When you can see the AF target clearly, | adjusment is complete. Diopter adjlstment dial HF get 4 ën À KZ @

& 50033 e_00_0_unified.book Page 14 Sunday, December 5, 2010 2:59 PM Sins the date/time Date and tme information is recorded on tne card together with the images. The file name is also included with the date and time information. Be sure to setthe correct date and time before using the camera. PV Press the MENU button + The menu screen is displayed on the LCD monitor. y caro serur RESETMYSET Là PICTURE MODE a € f IMAGE ASPECT | 43 BACKSES SET GR) 2 use © to select[f], then press 3 Use © to select I@1 then press Ÿ 4 use © to select[Y], then press Ÿ MENU button —Ÿ Arrow pad aff 5° Repeatthis procedure until the date and time are completely set 2016 08.0! 14.É + The time is displayed in the 24-hour format. 6" use DS to selectthe date format 8 Press the MENU button to exit

<e | É. 5 | 7 0033 e 00 0 unified.book Page 15 Sunday, December 5, 2010 2:59 PM

Shooting Viewfinder Shutter button P piace the AF target on the subject while viewing through the vieufinder

2° adjustthe focus Press the shutter eZ button halfway. c Viewfinder Card access lamp

Shutter speed AF confirmation mark + The focus is locked when a beep tone is output. The AF confirmation mark and the AF target in focus light up in the viewfinder. + The shutter speed and aperture value that have been set automatically by the camera are displayed. + The super control panel is not displayed while the shutter button is pressed’ 3 Release the shutter Press the shutter button all Z the way (fully). + The shutter sounds and the picture is taken. + The card access lamp blinks and the camera starts recording the picture. Bugoous 104 suogeiedsid4 Never remove the battery or card while the card access lamp is linking. Doing so could destroy stored pictures and prevent storage of pictures you have just taken.

Là & 50033 e_00_0_unified.book Page 16 Sunday, December 5, 2010 2:59 PM

— Holding the camera Keep your fingers and the strap away from the lens, flash, and the white balance sensor. Horizontal grip Vertical grip n . Itis possible to use the LCD monitor as à Taking a picture viewfnder and check the subjects composition, while viewing the or shoot while viewing an enlarged display on monitor the LCD monitor. 2 ‘Using live view” (P. 35) Ÿ Press the (O1 (live view) button to switch N to live view + The subject is displayed on the Shutter button LCD monitor. 1OI button 2° Press the shutter button to take the picture + The picture is taken with the focus adjusted.

Recording a movie During live view shooting, you can record à movie Ÿ Press the IOI (live view) button to switch to live view + The subject is displayed on the LCD monitor. 2° adjustthe focus + Press the shutter button halfway. 3 press the @ button to begin recording + Press the @ button again to end recording, + During recording à movie, press the shutter button to shoot a still picture. — When the camera stops operating If no operations are performed for approximately 8 seconds while the camera is on, the monitor backlight gets darker to save battery power. (when the super control panel is lit. no operations are performed for approximately one minute thereafter, the camera enters the sleep mode (stand-by) and stops operating. The camera activates again when you touch any button (the shutter button, [=] button, etc). F5 *BACKLIT LCD (Backlight timer)” (P. 109), *SLEEP”(P. 108)

Là & 50033 e_00_0_unified.book Page 18 Sunday, December 5, 2010 2:59 PM | Playback/Erasing Pressing the [#] button displays the last picture laying back taken. ages previous | | Displaysthe fame || | nextframe K&2/ Use 22 to formerd the frames. Each time you turn the main dial towards Q, the Close-up image is incrementally enlarged from 2x to 14x. playback Arrow pad Play back the image you want to erase and press the 9 button Use @® to select [YES] and press the button to erase. BACK+ SET» OK)

& 50033 e_00_0_unified.book Page 19 Sunday, December 5, 2010 2:59 PM || Basic operations There are three basic ways to operate this camera Using the direct buttons to operate the camera LEP. 20 You can make the function settings with the main dial or sub dial and the direct buttons assigned to à function. Settng information is displayed in the viewfnder and on the control panel and super control panel while you are setting à function This is useful for operating the camera while composing the subject in the viewfinder and for quickly operating the camera while checking the settings on the control panel

Setting while looking atthe super control panel EP. 21 You can make the function settings with the super control panel on the LCD monitor. You can use the super control panel to view the current settings and directiy change the settings During live view, you can make the function settings with the live control (EP. 37) while checking the actual image that will be recorded DEL

Setting onthe menu LEP. 22 You can use the menu to set shooting and playback settings and customize camera functions. suoge:sdo 21seg

A A 750033 e 00 2 pre 7.fm Page 20 Monday, December 6, 2010 3:33 PM 7 F4 E Using the direct buttons to operate the camera There are two ways to use the direct buttons. T while holding down a direct button, turn the main dial or sub dial + Release the button to set the function. After pressing one or two buttons at the same time, turn the main dial or sub dial + The function remains selected for approximately 8 seconds. You can tum the dial and set the function during that time. If no operations are performed during that time, the setting for that function is then set. I"BUTTON TIMER"(P. 107) À List of direct buttons À TT Direct ï 3 T No. | et Dial Function Ref. page AF [Se AP mode P.53 1 æ 2 [505 meterng mode P.46 MODE | Shooting mode (P/AISIM, et.) Pal 2 ve 2 [pong comes eme eauen 55060 1+2 | aremone | 5772 [AE brecketng PS # E Sets flash mode P.73 3 2 | Fashintensiy control P.76 4 we SIA [5e vite balance P.66 24 | mMoE+ws | ©72 |W bracketng P.6 5 SIA. | Eposure compensation P.47 3#5 72 | Flash intensity control P.76 45 SZ [WB compensation P.68 6 SZ [505150 sensitviy P.50 55 SIA [RESETMYSET DE: 7 SZ. [AP argetselection P.56

Là & 50033 e_00_0_unified.book Page 21 Sunday, December 5, 2010 2:59 PM

Ÿ Press the INFO button to ë display the super control panel a + Press the INFO button again to turn offthe a super control panel E + During live view, the live control is displayed. & 1 “Using the live control to operate the camera” (P.37) 1 "CONTROL SETTINGS"(P. 109) 3° Use {1 to move the cursorto the function you want to set, ù and change the setting with ® the dial JRECOMMENDED ISO Cursor lights Displays the selected function name Direct menu Press the © button to display the direct menu indicated at the position ofthe cursor. You can also use the direct menu to change the setting. After changing the setting, press the © button to confirm your setting. fno operation is made within a soie few seconds, your setting is confirmed and the super control panel is displayed For details on the functions that can be set with the super control panel, refer to “Super control panel" (EP. 6).

XŸ7 50033 _e 00 0 unified.book Page 22 Sunday, December 5, 2010 2:59 PM pus on the menu P Press the MENU button

to display the menu MENU DUR (CARD SETUP ÉPresermvser à Pense 9 Mu asreer Operten guide Press the MENU buton Press the © button to go back one screen to confirm the seting 2” use ©© to select a tab, then press Ô Shooting menu 1 Shooting menu 2 Playback menu Custom menu : Customizes shooting functions. This menu is further divided into 10 tabs, À through J Setup menu : Sets the basic functions of the camera. epe2 3 Use © to selecta function and Ÿ to go to the setting screen 4° Press the © button to confirm the setting + Press the MENU button repeatedly to exitthe menu. Using the dials to select a menu

d d \Ÿ7_ 50033 e 00_0_unified.book Page 23 Sunday, December 5, 2010 2:59 PM N 22 æ Table of Contents Basic guide Identifies the camera part names and describes the basic steps for shooting and playback. Names of parts and funCtions Camera. Viewfinde Control panel. Super control panel LCD monitor (Live view). LCD monitor (Playback) Preparations for shooting . Unpack the box contents. Preparing the battery Attaching a lens to the camera Loading the card. POWET ON meme S ENG LME DARS/ME cr Shooting ………… Playback/Erasing, Basic operations Basic operations ……… Using the direct butions to operate the camera . Seting while joking a atthe super control panel. Settng on the menu. 1 Using live view 35 Functions and operations available only during live view will be explained. Activating live view . ue Functions available during Ive view Taking à picture using live view... Using the live control to operate the camera. Using the face detection function Taking à picture using manual focus Switching the information display Taking à picture while comparing the effecl Enlarged display operation

& 50033 e_00_0_unified.book Page 24 Sunday, December 5, 2010 2:59 PM 2 Exposure 41 Describes functions related to exposure, which is important for shooting. These functions are for determining the aperture value, shutter speed, and other settings by measuring the brightness in the picture. Program Shooting Aperture priority shooting . Shutter priority shooting. Manual shooting … Bulb shooting. Preview function Changing the metering mode Exposure compensation ……… AE lock AE bracketing ISO sensitivity setting ISO bracketing... Multiple exposure 3 Focusing and shooting functions 53 Describes the optimal focusing methods according to the subject and shooting conditions. AF mode selection... 53 S-AF (single AF). 53 C-AF (continuous AF) …. ee 54 MF (manual focus) 54 Simultaneous use of S-AF mode and MF mode (S-AF4MF) … 55

….62 Simultaneous use of C-AF mode and MF mode (C-AF4MF).. AF target selection. .… en Registering an AF Forget mode. Sequential shooting .…… … Self-timer shooting... Remote control shooting. ANE-SROCK.......... IMAGE SHAbIIIZEr 4 Record mode, white balance, and picture mode 64 Describes image adjustment functions specific to digital cameras. Selecting the record mode 64 Recording formats . 64 Selecting the record mode … 65 Setting the image aspect. ….65

4 A \Ÿ7_ 0033 e_00_0_unified.book Page 25 Sunday, December 5, 2010 2:59 PM N 72 æ WB bracketing ……… Picture mode … Noise reduction. Noise filter. 5 Flash shooting LE] Describes how to shoot with the built-in flash and an external flash. Flash mode setting … Built-n flash shooting Flash intensity control. . FIASh DraCKEUNg External flash shooting Shooting with the Olympus wireless RC flash Using commercially available flashes 6 Recording and viewing movies 83 Describes movie recording method and functions. system. RECOTdINQ MOVIES Changing the movie recor Recording sound ……… Viewing movies. d mode . LT LT LT ea A5)

É & 50033 e_00_0_unified.book Page 26 Sunday, December 5, 2010 2:59 PM

RESET/MYSET. 9 Customizing your camera Describes how to customize the camera's settings. #3 BUTTON/DIAL D RELEASE y. DISP/m)PC . REC VIEW 8, MENU DISPLAY FIRMWARE. Setting MYSET... Resetting the settings… AF AREA. Eur SET UP. RESET LENS. BULB FOCUSI FOCUS RING. MF ASSIST AF ILLUMINAT. (AF Illuminator) C-AF LOCK.

É & 50033 e_00_0_unified.book Page 27 Sunday, December 5, 2010 2:59 PM

4 hTIMER (Auto power off)... PICTURE MODE SETTINGS..

d à 97-0033 e_00_0_unified.book Page 28 Sunday, December 5, 2010 2:59 PM N 72 æ Describes how to print your pictures. Print reservation (DPOF)..… Print reservation . Single-frame reservation. Alkframe reservation … … Resetting the print reservation data . Direct printing (PictBridge).…. Connecting the camera to a printer. Easy printing Custom printing. Refer to this section for troubleshooting and camera maintenance information.

13information 136 Refer to this section for information on optional accessories, camera specifications, and other useful shooting information: CAT DASICS nn Usable cards... Formatting the card... Battery and charger... Using your charger abroad…… Interchangeable lenses . ZUIKO DIGITAL interchangeable lens ZUIKO DIGITAL lens specifications …… Program line diagram (P mode) uu Flash synchronization and shutter speed EXPOSUTE Warning diSPIAÿ.........… Flash modes that can be set by shooting mode 28 White balance color temperature... 7 EN À

É & 50033 e_00_0_unified.book Page 29 Sunday, December 5, 2010 2:59 PM

F Record mode and fille size/number of storable still pictures Functions that can be registered with MYSET setting... Menu directory ……. . Specifications . System Chart. SAFETY PRECAUTIONS INAEX mn. s S

50033 e_00_0_unified.book Page 30 Sunday, December 5, 2010 2:59 PM Correct focus cannot be obtained Focusing on one area g pictures while checking the results Extending the useful life of the battery increasing the number of pictures that can be taken RELTES AF target and take the picture. The minimum shooting distance varies depending on the lens. Move to the minimum shooting distance of the lens from the subject and take a picture The camera may be having dificulty focusing on the subject with auto focus. Use MF to fix the distance ofthe focus. It may be easier to focus, even in low light situations, when using the AF illuminator. Select the AF target and take the picture using the desired AF target. Use MF. It may be helpful to focus while using live view with an enlarged image. Set[AF SENSITIVITY] to [SMALL] and focus using à smaller area. Use macro lens for close-up shots. During live view, you can take a picture while checking the white balance, exposure compensation, picture mode, and other setngs on the LCD monitor. You can take a picture while using the live mul view display to compare the effect of white balance or exposure compensation. You can use the preview function to check the depth of field ata selected aperture value. You can use live view to check the set exposure conditions. You can use [TEST PICTURE] to check the image on the LCD monitor without recording the image to a card. Pressing the shutter button halfway, playing back images, and using the live view function over a long period consumes considerable battery power. Limiting these actions wil help extend the useful life ofthe battery. Set ISLEEP] so that the camera enters sleep mode faster. Set[BACKLIT LCD] so thatthe backlight turs off faster. Reduce the pixel count and compression rate settings. You can insert two types of cards.

Ed | & 50033 e_00_0_unified.book Page 31 Sunday, December 5, 2010 2:59 PM Taking pictures in low light situations without using the flash Setting the camera to fire the flash automatically in low light situations Taking pictures without whites appearing too white or blacks appearing to dark Taking monotone pictures: Taking pictures of a subject against backlight blurred background Taking pictures that the subject in motion or convey a sense of motion Taking pictures with the correct color Increase the ISO sensitivity. Setthe image stabilizer function. Setthe flash setting to [AUTO]. Take a picture while checking the histogram and Highlight&S hadow. Take a picture while checking the shutter speed and aperture value displays. If either is blinking, the optimal exposure is not obtained. Setthe gradation seting to [AUTO]. Subjects with areas oflarge contrast are adjusted automatically. Adjustthe exposure compensation. Set PICTURE MODE] to [MONOTONE] You can take monotone pictures in black and white, sepia tones, purplish tones, bluish tones, and greenish tones. Or set [PICTURE MODE] to [GRAINY FILM]. Recorded images can be edited into black-and-white or sepia-toned images. Setthe gradation setting to [AUTO]. Setthe flash setting to [41 (lin flash) and take the picture. Use spot metering to measure the exposure of the subjectin the center ofthe picture. Ifthe subjectis notin the center ofthe picture, use AE lock to lock the exposure, and then change the composition and take the picture. You can adjust the image using [SHADOW ADJ ] of UPEG EDIT]. Use A (aperture priority) mode to decrease the aperture value as much as possible. You can blur the background more by shooting up close to the subject. Use the S (shutter priority) mode to take the picture. Setthe white balance according to the light source. You can also make fine changes to the settings. With WB bracket shooting, you can capture 3 to 9 images with different white balance settings for each picture taken. This enables you to take pictures with the desired white balance without having to make fine changes to the settings. 41-43, p.141

Ed | & 50033 e_00_0_unified.book Page 32 Sunday, December 5, 2010 2:59 PM Taking pictures so that whites come out white and blacks come out black Taking pictures without noise Making the viewfinder ier to \ Optimizing the LCD monitor Reducing camera shake Taking pictures while checking the level of the camera Setthe spot metering for highlight or shadow control. If the subjectis notin the center ofthe picture, use AE lock to lock the exposure, and then change the composition and take the picture. Adjust the exposure compensation. it may be helpful to use AE bracketing if you are not sure about the exposure compensation value. Setthe gradation seting to [HIGH KEY] or ILOW KEY] and take à picture. Setthe ISO sensitivity to a low value, ISO 200 is recommended. Set INOISE REDUCT.] to [AUTO] or [ON]. When the ISO sensitivity is setto 3200 or another high value, set [NOISE FILTER] to [HIGH]. Adjustthe viewfnders diopter in accordance with your vision. Ifthe viewfnder is still dificuit to view after adjusting the diopter or you want to use the viewfinder without eyeglasses, you can replace the viewfinder with the optional diopter compensation eyecup. You can adjustthe brighiness ofthe LCD monitor. During live view, set [LIVE VIEW BOOST] to [ON] to make the subject easier to see withoutthe exposure reflecting on the LCD monitor. Setthe image stabilizer function. Hold the camera firmly when pressing the shutter button. When using à slow shutter speed, be sure to stabilize the camera by using à tripod or similar method. Fire the flash regardless of the light conditions. Increase the ISO sensitivity. When ISO is setto [AUTO], setthe upper limit to a high value, such as 1600, so that 150 automatically increases in low light situations. Using the selftimer can reduce camera shake that occurs when the shutter button is pressed. You can display the level gauge to check whether the camera is level. Display the ruled lines in live view. Compose the shot so thatthe subject and ruled lines are horizontally and vertically aligned. LOU Set PICTURE MODE] to F3 to NG. Activate the live view and press the @ button.

Ed | & 50033 e_00_0_unified.book Page 33 Sunday, December 5, 2010 2:59 PM Playback DEEE ET A set (REC VIEW]. You can set the number of seconds the picture is taken that the image is displayed. Set[REC VIEW] to [AUTO (]] After you take a picture, the camera suitches to playback mode automatically, allowing you to delete the image. Use close-up playback to check whether the subjectis in focus. Use index display to search from a index of between 4 and 100 frames. Use calendar display to search by the date the picture was taken. Use the AV cable or the HDMI cable to play back recorded images on your TV. You can also view the images as à slideshow. You can use light box display to display to frames side by side. You can play back another image without changing the magniication. Comparing images You can register up to four camera settings which are frequenty used as MYSET. By registering the setting, you can selectitas one ofthe Saving the settings shooting mode such as P, $, A, M. Also, assign MYSET 1 to 4 to the specified button (Fn/ C#JO(P review) in [BUTTON FUNCTION] so that you Can easily use that function during shooting. Changing the menu RES You can change the display language.

L. & 50033 e_00_0_unified.book Page 34 Sunday, December 5, 2010 2:59 PM ds N Indications used in this manual The operation button icons on the body of the camera are used to indicate the operation buttons in this manual. See “Names of parts and functions” (EE P. 2). ein this manual, T7 indicates the main dial on the back of the camera. ein this manual, ZX indicates the sub dial on the front of the camera The operating instructions of the direct buttons, super control panel and menu are described as follows in this manual. + “'indicates operations performed at the same time. + “» ‘’indicates you should proceed to the next step. e.g.: When setting the white balance Uorectoutton WB+TIA (| Super control panel ©» Dre MENU » [9,1» [83] » [WB] © The following symbols are used throughout this manual. Important information on factors which may lead to a malfunction Ont or operational problems. Also warns of operations that should be absolutely avoided. Useful information and hints that will help you getthe most out of your camera ù Lea Reference pages describing details or related information

[Al Using live view e view Activating | Itis possible to use the LCD monitor as a viewfnder. You can view the exposure or white balance effect and the subjects composition while you take the picture.

Close the eyepiece shutter so the light entering through the viewfinder does not affect the exposure while shooting with live view 1 press the [O] button. Eyepiece shutter + The mirror is raised and the subject is displayed on the LCD monitor. + When [AF MODE] was set to [C-AF], it will be set automatically to [S-AF] (or [S-AF+MF] in case it was set to [C-AF+4MF]). IOI buton Functions available during live view The following functions can be used during live view. Focusing during live view + Taking a picture while adjusting the focus manually ESP. 38 + Taking a picture while focusing on a face UP. 38 + Taking a picture while checking the focus by enlarging the zone to be focused LFP. 40 + Taking a picture using phase difference AF LFP. 103, P. 105 Taking a picture while checking the effect + Taking a picture after comparing the effect of exposure compensation or white balance ESP. 40 + Taking a picture while checking the effect of image stablizer (ESP. 62) Switching the information on the LCD monitor + Turing onoffthe information display. Displaying the histogram or ruled lines LP. 39 + Checking the subject on the monitor even in low light situations LP. 109 Q notes + Ifthere is a high-intensity light source within the screen, the image may be displayed darker but will be recorded normally. + Ifthe live view function is used over a long period, the temperature ofthe image pickup device will rise causing the images with high ISO sensitvity to appear noisy and unevenly colored. Tum of the camera for a period of time allowing it to cool. + Exchanging the lens will cause live view to stop.

ds N L Press the shutter button halfway. AE confimation mark + When the focus is locked, the AF confirmation mark and AF target mark light up. + When using a lens other than a high-speed Imager AF compatible lens, the © focus confirmation may not light up. IE may be difficult to autofocus Press the shutter button all the way to take a picture. men en Buisn

Shooting while changing the angle of the LCD monitor You can change the angle ofthe LCD monitor on the camera. This enables you to shoot at an awkward angle while checking the subjects composition on the LCD monitor. + Slowiy rotate the LCD monitor within the moveable range.

ï & / É 97" 0033 e_00_0_unified.book Page 37 Sunday, December 5, 2010 2:59 PM As > 4 / Using the live control to operate the camera The following screen which simultaneousiy displays shooting setting functions and associated options is called the live control. You can display and use it by pressing © button during live view. You can setthe art filter, the white balance and other effects while checking live view. When the super control panel is displayed, press the INFO button to switch the display. Functions =

L— seting + Available functions Image stabilizer Flash mode . Picture mode Flash intensity control White balance Metering mode =] 150 sensitivity \ Aspect ratio Face detection . S SF Record mode Movie sound record … 7 1 press the @ button to display the live control + Press the © button again to tum off the live control. Move the cursor to the function you wish to set using the main dial and select settings using the sub dial, then press the © button Displays the selected Sen par, + Ifno operations are performed during that time, the setting for that function is confirmed. + You can use the arrow pad instead of the dials. + There may be unavailable menus depending on the selected shooting mode. + You can also display the super control panel. 15 "CONTROL SETTINGS"(P. 109) EN £

É & 50033 e_00_0_unified.book Page 38 Sunday, December 5, 2010 2:59 PM

men en Buisn Using the face detection function By setting [@ FACE DETECT] to [ON], the camera will detect people‘s faces in the frame and adjustthe focus and metering automatically. Set the AF target to [::] and the metering mode to @. Assign [Fn FACE DETECT] to the Fn button to easily set to the best settings for taking pictures of people. Direct button Fn/S (preview) button (The setting changes each time the button is pressed.) Usueer control panel © » > 1@ FACE DETECT] I Menu MENU » [#,]» [63] » [© FACE DETECT]» [ON] + In order to use the Fn button or @ (preview) button, [Fn FACE DETECT] needs to be set up in the menu in advance.E& "BUTTON FUNCTION” (P. 106) + After setting [@FACE DETECT] to [ON] while using the Fn button or © (preview) button, the following functions are automatically set to the best settings for taking pictures of people. Function Setting Ref. page METERING = P.46

L_ifthe camera detects a face, a frame will be displayed in that location. + When you press the shutter button, the camera will focus. on the position of the face detection frame (however, if a single AF target is selected with [AF AREA], the camera will focus on the AF target selected). Q notes + During sequential shooting, face detection will work only atthe first shot. + Depending on the subject, the camera may not be able to correctly detect the face. + This function is available only during live view. + When using phase difference AF, the camera focuses with the AF target which is the closest to the displayed frame. g manual focus During live view, you can take a picture focusing manually while checking the focus on the LCD monitor. 1 setthe AF mode to IS-AF#MF]or [MF]. T3 “AF mode selection” (P. 53) 2 Adjustthe focus by rotating the focus ring. + In [S-AF4MF] mode, after pressing the shutter button halfway or pressing the AEL/AFL button, you can rotate the focus ring to finely adjust the focus before taking the picture. + Using the enlarged display can be very convenient when adjusting the focus manually. IS “Enlarged display operation" (P. 40)

É 970083 e_00_0_unified.book Page 39 Sunday, December 5, 2010 2:59 PM NZ

Switching the information display You can switch the information displayed on the monitor by pressing INFO button repeatedly. You can also switch the information displayed by turning the dial while pressing the INFO button. Information display on ‘1 Histogram display INFO sd —+ ä Fo+ TZ $

Image only Multi view display"? Zoom display? (SP. 40) (LFP. 40) #1 With ŒSYINFO SETTING] (P. 109), you can also select [ÆMESMERMIEI for the ruled line display. #2 Itis displayed when [EYINFO SETTINGS] (LP. 109) is [ON]. Some items are not displayed depending on the settings. #3 During multiple exposure shooting (ESP. 51) or when [LEVEL GAUGE] (EP. 110) is setto [ON], S\ the information display switches to "Multiple exposure display” and ‘Digital level gauge display”.

STIPS To quickly switch to the frequently used display: — You can hide the information display for all modes except ‘Information display on”. [ES/INFO SETTINGS] (EP. 109) How to read the histogram: — The following shows you how to read the histogram display easily (D Ifthe graph has many peaks around here, the image will appear mostiy black. @ Ifthe graph has many peaks around here, the image will appear mostiy white. @ The part indicated in green in the histogram shows the luminance distribution within the spot metering area.

men en Buisn [. É \Ÿ7_ 0033 e_00_0_unified.book Page 40 Sunday, December 5, 2010 2:59 PM Taking a picture while comparing the effect You can check the effect of exposure compensation or white balance on a 4-split screen 1 Press the INFO button repeatedly to display the multi view dis play. LE *Switching the information display” (P. 39) + The exposure compensation comparison screen is displayed. Press @ to switch to the white balance comparison screen. Press @@ to switch the screen. 2 use @9 or the dial to selectthe setting value, then press the © button. + You can take the picture using the set value. Q notes + Exposure compensation is not available in M or BULB modes. + This function cannot be used when the picture mode is set to an art filter. + When the exposure compensation value exceeds +3, the effect is not displayed correctiy. Enlarged display operation Itis possible to enlarge the subject for display. Enlarging the image during MF makes focus confirmation and adjustment easier. Fn button/ © (preview) button 1 press the Fn button/O (preview) button to + The enlargement frame will be displayed. + In this state, press the shutter button halfway, and focus using the enlargement frame regardless of the AF target setting. (Zoom frame AF) 2 use i to move the frame and press the Fn button/© (preview) button. + The area inside the frame is enlarged and displayed + In this state, press the shutter button halfway to focus while zoomed. + Press and hold the © button to retum the enlargement frame to the center after it was moved. 3 rum the dial to change the magnification (5%/7x/10x/14%). + Use 123 to scroll the frame even during magnification. + Press the @ button, or press and hold the Fn button/ © (preview) button to cancel the zoom display. play the zoom display. TIPS To enlarge the image just by rotating the focus ring: ES'MF ASSIST"(P. 103) To enlarge the image when the Fn button/© (preview) button is set to other function: > Press the INFO button to display the zoom display, and then press the @ button. EF "Switching the information display” (P. 39)

& 50033 e_00_0_unified.book Page 41 Sunday, December 5, 2010 2:59 PM Exposure Program shooting The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. While holding doun fre MODE buttons tu the main dial to set the shooting mode to P. MODE buton + When the shutter button is hal.pressed, the shutter speed and aperture value are displayed on the viewfinder and control panel Shooting mode Shutter speed

32 ]aF confirmation mark Viewfinder Control panel Aperture value Program shift (Ps) By tuming the main dial (or sub dial) in the P mode, you Program shift can change the combination of aperture and shutter speed while maintaining the optimum exposure LS “Program line diagram (P mode)” (P. 140) + The program shift setting will not be canceled after shooting. To cancel program shift setting, tum the main dial (or sub dial) until PS disappears from the viewfinder or control panel, or tum off the power. + Program shif is not available when you are using a flash. Viewfinder 2 TIPS The shutter speed and aperture value are blinking: » The optimum exposure cannot be obtained. For details, see "Exposure warning display” (ESP. 141).

É & 50033 e_00_0_unified.book Page 42 Sunday, December 5, 2010 2:59 PM ds N 2] 4 Aperture priority shooting The camera sets the optimum shutter speed automatically for the aperture value you have selected. When you open the aperture (decrease the aperture value), the camera will focus within a shorter range (shallow depth of feld) and produce a picture with a blurred background. When you close the aperture (increase the aperture value), the camera will focus within a longer range. Use this mode when you wish to add detail to the background. | 2) Mhentheapeñure

D, |unenthe aperure [value (f-number) is increased value (number) is | decreased While holding down the MODE button, turn the in dial to set the shooting mode to A. Turn the main dial (or sub dial) to set the aperture value. Viewfinder Aperture value

e wB D] 250 F56 n 30 Control panel Close the aperture (number is increased) à TIPS To check the depth of field with the selected aperture value: > See "Preview function’ (ESP. 46). To change the exposure adjustment interval: This can be setin 1/3 EV, 1/2 EV or 1 EV increments. IS"EV STEP"(P. 111) Shutter speed is blinking: > The optimum exposure cannot be obtained. For details, see “Exposure waming display” (ESP. 141).

50033 e_00_0_unified.book Page 43 Sunday, December 5, 2010 2:59 PM Shutter priority shooting The camera sets the optimum aperture value automatically for the shutter speed you have selected. Set the shutter speed depending on the type of effect you want. À higher shutter speed allows you to capture a fast-moving subject without blur, and a slower shutter speed blurs a moving subject, creating a feeling of speed or motion. Set the shutter speed depending on the type of effect you want. A fast shutter speed can freeze a fast action scene wihoutany br. A slow shutter speed wil blur à fast action scene. This blurring will give the impression of dynamic motion. While holding doun re MODE button, turn the main dial to Set the shooting mode to te main dial (or sub dial) to set the Shutter speel Viewfinder Controï panel Faster shuter speed 2TIPS The picture looks blurred: — The possibilty of camera shake spoiling your picture increases greatly during macro or ultra- telephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera. —> When the shutter speed is slow, camera Shake is more likely to occur. You can reduce camera shake by using the image stabilizer. L&r ‘Image stabilizer"(P. 62) To change the exposure adjustment interval: —> This can be setin 1/3 EV, 1/2 EV or 1 EV increments. USEV STEP"(P. 111) The aperture value is blinking: — The optimum exposure cannot be obtained. For details, see “Exposure warning display” (EP. 141).

& 50033 e_00_0_unified.book Page 44 Sunday, December 5, 2010 2:59 PM Allows you to set the aperture and shutter speed manually. You can check how much it differs from the appropriate exposure by using the exposure level indicator. This mode gives you more creative control, allowing you to make whatever settings you like, regardiess of the correct exposure. While holding down the MODE button, turn the main dial to setthe shooting mode to M. Turn the so set the aperture value and the shutter speed. MODE button Aperture value: Tum the main dial Shutter speed: Tum the sub dial to to setthe value setthe value. + The range of aperture values available varies with the lens type. + The shutter speed can be set from 1/8000 to 60 seconds. + In M mode the exposure level indicator will appear on the super control panel screen. lt shows the difference (ranging from -3 EV to +3 EV) between the exposure value calculated by the currentiy selected aperture and shutter speed and the exposure value considered optimum by the camera. fthe difference exceeds 43 EV, the entire indicator blinks. Underexposure Overexposure Optimum exposure Noise in images During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are caused when current is generated in those sections of the image pickup device that are not normally exposed to light, resulting in à rise in temperature in the image pickup device or image pickup device drive circuit. This can also occur when shooting with a high ISO setting in a high-temperature environment. To reduce this noise, the camera activates the noise reduction function. EF “Noise reduction” (P. 72)

A5 PS Ÿ7_ 0033 e_00_0_unified.book Page 45 Sunday, December 5, 2010 2:59 PM NS 4 æ 2 TIPS The picture looks blurred: » The use of à monopod or tripod is recommended when taking a picture at slow shutter speed.

• When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera shake by using the image stabilizer. L&r ‘Image stabilizer(P. 62) To change the exposure adjustment interval: » This can be setin 1/3 EV, 1/2 EV or 1 EV increments. L&'EV STEP”{P. 111) To switch the operations of the main dial and sub dial:

• You can switch the functions that are set with the main dial and sub dial. LS "DIAL FUNCTION"(P. 104) Q notes

+ Exposure compensation is not available in M mode: Bulb shooting You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button. Bulb shooting can also be done using an optional remote control (RM-1) or remote control cable (RM-CB1). £&“Bulb shooting with the remote control” (P. 61) While hol ŒBULB].

• “buLb" is displayed in the viewfinder and on the control panel. g down the MODE button, turn the to setthe shooting mode to A 2 TIPS 7 To automatically end bulb shooting after a specified period of time: 7 » You can setthe maximum time for bulb shooting. E5"BULB TIMER"(P. 112) To fix the focus during manual focus shootin » You can fix the focus So the focus does not change even ifthe focus ring is tumed during exposure. ES'BULB FOCUSING"(P. 102) Q notes + The following functions are not available during bulb shooting. Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketingl exposure compensation

& 50033 e_00_0_unified.book Page 46 Sunday, December 5, 2010 2:59 PM The viewfinder shows the focused area (dept of field) with the selected aperture value Press the G (Preview) button to use the preview function. © (Preview) button Changing the metering mode There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted averaging metering, and 3 types of spot metering. Select the most suitable mode for the shooting conditions. I Direct button B+2= 63 button U super control panel © » Gt IMETERING]

Menu MENU » [®,]» [63] » IMETERING] Viewfinder 62: Digital ESP metering G) : Center weighted averaging metering C) : Spot metering C4 1: Spot metering - highlight control CD54 : Spot metering - shadow control Control panel 63 Digital ESP metering During live view, the camera measures the light levels and calculates the light level differences in 324 separate areas of the image (49 areas when shooting with the view finder). This mode is recommended for general use Setting the AF synchronized function to [ESP+AF] enables metering centered around the AF target that is in focus with AF. Itis available when shooting using the view finder (phase difference AF).

É 97-0033 e_00_0_unified.book Page 47 Sunday, December 5, 2010 2:59 PM

© Center weighted averaging metering This metering mode provides the average metering between the subject and the background lighting, placing more weight on the subject at the center. Use this mode when you do not want the light level of the background to affect the exposure value. C2 Spot metering The camera meters à very small area around the center ofthe subject, defined by the spot metering area mark in the viewfnder. Use this = a mode when there is very strong backlight. ° CD# ! Spot metering - ht control When the overall background is bright, white areas of the image will = 3 come out gray if you use the cameras automatic exposure. Using this mode enables the camera to shift to over-exposure, allowing accurate white reproduction. Metering area Metering area is the same as spot metering. C25# Spot metering - shadow control When the overall background is dark, black areas ofthe image will come out gray if you use the camera's automatic exposure. Using this mode enables the camera to shift to under-exposure, allowing accurate black reproduction. Metering area is the same as spot metering. Exposure compensation In some situations, you may get better results if you manually compensate (adjust) the exposure value set automatically by the camera. In many cases, bright subjects (such as snow) will tum out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. Forthe same reason, adjust toward - when shooting dark subjects. The exposure can be adjusted in a range of 45.0 EV 2.0EV Uorect button B+S2 AM ndjust tovard +

A A \Ÿ7_ 0033 e_00_0_unified.book Page 48 Sunday, December 5, 2010 2:59 PM N 72 æ + The exposure compensation indicator is displayed. The exposure compensation indicator will not be displayed when the exposure is compensated by 0. When settn 1/3 EV increments When setto 1/2 EV increments 1BEV IREV + Ifthe exposure compensation value exceeds the scale of the exposure compensation indicator, the indicator will blink in the viewfinder and on the control panel. À red @B is displayed on the left and right edges of the indicator on the super control panel.

TIPS To change the exposure adjustment interval: > This can be setin 1/3 EV, 1/2 EV or 1 EV increments. E"EV STEP" (P.111) To adjust the exposure using only the dials: > You can setthe exposure compensation value without pressing ES "DIAL FUNCTION” (P. 104) Q notes + Exposure compensation is not available in M and BULB modes + When the exposure compensation value exceeds +3, the effect is not displayed correctiy on button. the live view. A A > @7 AE lock The metered exposure value can be locked with the AEL/AFL button (AE lock). Use AE lock when you want a different exposure setting from the one that would normally apply under the current shooting conditions. Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic exposure), but you can lock the exposure alone by pressing the AEL/AFL button. Press the AEL/AFL button atthe position where you AEL/AFL button wish to lock the metering values and the exposure wi be locked. + Pressing the AEL/AFL button again to cancel the AE lock. Ps EN À 7 LA

É & 50033 e_00_0_unified.book Page 49 Sunday, December 5, 2010 2:59 PM

2 TIPS To lock the exposure only while pressing the AEL/AFL button: LS “AEL/AFL MEMO"(P. 106) If you find it difficult to press the AEL/AFL button and shutter button at the same time: » You can switch the functions of the AEL/AFL button and the Fn button. LE "een" (P. 107) To activate AE lock with a set metering mode: > You can setthe metering mode for locking the exposure with the AE lock. LS 'AELMetering” (P. 111) Eh AE bracketing " The camera automatically shoots a number of pictures at diferent exposure values for each À frame. Even in conditions where correct exposure is difficult to obtain (such as à backlit Ê subject or a scene at dusk), you can pick the picture you prefer from a selected number of ] frames with a variety of different exposure settings (exposure and compensation values). The pictures are taken in the following order: Picture with optimum exposure, picture adjusted in - direction, and picture adjusted in + direction. e.9.) When BKT is set to [3F 1.0EV] “LOEV Compensation value: 0.3, 0.5, 0.7 or 1.0 Number of frames: 2, 3, 5, or 7 + The available compensation value differs depending on the number of frames. + The compensation value and the number of frames will change ifthe EV step is changed ES 'EV STEP" (P. 111) Uorrectoutton MODE +AF» 7/2

graceing [| 3F Compensation range — + The exposure value forthe remaining frames blinks during shooting

É & 50033 e_00_0_unified.book Page 50 Sunday, December 5, 2010 2:59 PM & ù 4 / Start shooting. + In single-frame shooting, the exposure changes every time the shutter button is pressed + In sequential shooting, hold down the shutter button until the selected number of frames are taken. + Releasing the shutter button stops flash bracketing shooting. When itstops, blinks in the viewfinder and on the control panel and is displayed in green on the super control panel How AE bracketing compensates exposure in each shooting mode Depending on the selected shooting mode, exposure is compensated in the following way: P mode : Aperture value and shutter speed

A mode : Shutter speed S mode : Aperture value M mode : Shutter speed TIPS To apply AE bracketing to the exposure value you have compensated: > Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the exposure value you have compensated ISO sen setting The higher the ISO value, the greater the camera's light sensitivity and the better its ability to shoot in low light conditions. However, higher values may give pictures a grainy appearance. 180 button Horectoutton 150», 7/2 N \ LA I Super control panel 7 IAUTO] : The sensitvity is set automatically according to the shooting conditions. For IISO-AUTO SETI, you can setthe default (value nommally used when the optimal exposure can be obtained) and upper limit (upper limit of ISO that automatically changes). EF "1S0-AUTO SET” (P. 111)

100 - 6400] : Fixed ISO sensitivity. [ISO STEP] can be

changed to [LBE VI or [LE VI. E5 150 STEP" (P. 111) Setting display Viewfinder Control panel When setto [AUTO] te default value is displayed. AUTO : |SO-A 8 100 : oo ‘oo 510 : Etaa 6400 + 125 and 1250 are displayed in the viewfinder as 120 and 1200, respectively. EN £ K&> 2

97” 0033 e_00_0_unified.book Page 51 Sunday, December 5, 2010 2:59 PM isplay after setting Viewfinder Control panel When setto [AUTO], ISO-A and the When setto 2 setting otherthan 1$0 value determined bythe camera AUTO, ISO is displayed. When setto are displayed. For all other settings, 3200 or a higher value, ISO blinks. ISO and the set value are displayed. When set to 3200 or a higher value, ISO blinks: 2 TIPS To automatically set the optimal ISO in M mode: » Normall, the AUTO setting is not available in M mode, but you can set it for use in all shooting modes. E&"SO-AUTO” (P. 112) IS0 bracketing The camera automatically takes pictures at a different SO sensitivity with the shutter speed and aperture value fixed. 3 images with different exposures are recorded in the order of the set1S0 sensitvity (optimum exposure when set to [AUTO]), exposure in the - direction, and exposure in the + direction. Compensation value: 0.3, 0.7 or 1.0 + The compensation value is set in 1/3 EV increments regardless ofthe ISO step setting Number of frames: 3 I Menu MENU » [G;] > IBRACKETING] » [ISO BKT] + Bracketing is performed regardless of the upper limit set with [ISO-AUTO SET] + This function cannot be used when the picture mode is set to an art filter. Multiple exposure This overlays multiple frames and saves it as a single image. The image is saved with the record mode set atthe time the image is saved You can overlay an image while taking a picture or overlay a recorded image in playback mode. MULTIPLE EXPOSURE In shooting mode, up to 4 frames of pictures taken can be overlaid and saved as a single image. You can also select a stored RAW image and shoot multiple exposures to create an overlay image [FRAME] : Selectfrom [2F] [3F], or [4F]for the number of pictures to take TAUTO GAIN] : When setto [ON], the brightness of each frame is set to “L/the number of picture taken” and the images are overlaid. When setto [OFF] the images are overiaid with the original brightness of each frame IOVERLAY] _: When setto [ON], a RAW image recorded on a card can be overlaid with multiple exposures and stored as a separate image. The number of pictures taken is one less than the frames set in [FRAME].

É 70083 e 00 0_unified.book Page 52 Sunday, December 5, 2010 2:59 PM NZ

IMAGE OVERLAY In playback mode, up to 4 frames of RAW images can be overlaid and saved as a single image. ITETSEROURE EF ‘mage overlay” (P. 95) I Menu MENU » [6] » [MULTIPLE AUTO GAIN OFF

EXPOSURE] OVERLAY OFF

Setting display + When multiple exposure is set, à is displayed on the —_ control panel and super control panel. When shooting is ELLE UEUCr interrupted, @ blnks and [FA is displayed in green on the super control panel. Control panel 2 TIPS To cancel the image during shooting: > Pressing the 9 button cancels the last picture taken. To shoot multiple exposures while checking the composition for each frame: > Take pictures using live view. The overlay images are displayed semi-transparentiy on the LCD monitor so you can shoot while checking the position of the image overlay. To overlay 5 or more frames: > To overiay 5 or more frames, save the image as a RAW file and use [OVERLAY] to repeat the multiple exposure shooting Q notes + When multiple exposure is set, [SLEEP] is set to [OFF] automatically. + RAW images taken with another camera cannot be used for the overlay image. + When LOVERLAY] is set to [ON], the images displayed when à RAW image is selected are developed with the settings at the time of shooting. + To setthe shooting functions, cancel multiple exposure shooting first Some functions cannot be set + Multiple exposure is canceled automatically in the following situations. The camera is tumed off/The [=] button is pressed/The MENU button is pressed/The @ button is pressed/The battery power runs out/The card is replaced/The LCD monitor is closed/The USB cable, AV cable or the HDMI mini cable is inserted + The information for the first frame during multiple exposure shooting is displayed as the shooting information. + When the picture mode is setto ART to ARÿ, multiple exposure is not available with the MYSET or E@}

& 50033 e 00 _0_unified.book Page 53 Sunday, December 5, 2010 2:59 PM Focusing and shooting functions AF mode selection The three focus modes S-AF, C-AF, and MF are available with this camera. You can take pictures by combining S-AF or C-AF mode with MF mode.

MF -£ MF saraur: GE -F MFAF Carr: [AFF MFAFG S-AF (single AF) Focusing is performed once when the shutter button is pressed halfway. Iffocusing fails, release your finger from the shutter button and press it halfway again. This mode is suitable for taking pictures of still subjects or subjects with limited movement. Press the shutter button halfway. Viewfinder + When the focus is locked, the AF confirmation mark lights up. + À beep sound is output when the subjectis in focus. AF confirmation mark suonuny Sunoous pue Bursn204 ]

É & 50033 e_00_0_unified.book Page 54 Sunday, December 5, 2010 2:59 PM ds N 2] 4 à TIPS When itis difficult to focu: ight conditions: > The built: flash can function as an AF illuminator. This makes focusing easier in low-light conditions using AF mode. ES "AF ILLUMINAT. (AF Illuminator)” (P. 103) When you want to quickly switch from AF mode to M — By registering [MF] to the Fn button, [ss] button orthe @ (preview) button, you can switch to MF mode just by pressing that button. ES "BUTTON FUNCTION" (P. 106) When you want to be able to shoot even if the subject is not in focus: > See "RLS PRIORITY S/RLS PRIORITY C"(E&P. 108). To not light up the AF target in the viewfinder when the subject is in focus: > The AF target in the viewfinder lights red when the subject is in focus. You can setthe AF target so as not to turn on. E&*AF AREA POINTER" (P. 103) C-AF (continuous AF) The camera repeats focusing while the shutter button remains pressed halfway. When the subject is in motion, the camera focuses on the subject in anticipation of its movement {Predictive AF). Even ifthe subject moves or you change the composition of the picture, the camera continues trying to focus. Press the shutter button halfway and keep it in this position. + When the subject is in focus and locked, the AF confirmation mark lights up. + The AF target does not light up, even when the subject is in focus + The camera repeats focusing. Even if the subject moves or even if you change the composition of the picture, ocusing is tried continuously. + À beep sound is output when the subject is in focus. The beep sound is not output after the third continuous AF operation, even when the subject is in focus. suopuny Bupoous pue Butsn>04 [..] N \ bé TIPS 7 The camera focuses on something passing in front of the subject: » You can setthe camera 50 as notto change the focus even ifthe distance to the subject changes. EP "C-AF LOCK"{P. 103) MF (manual focus) This function allows you to manually focus on any subject Adjustthe focus using the focus ring. Near EN £ K&> 2

É 70083 e_00_0_unified.book Page 55 Sunday, December 5, 2010 2:59 PM NZ

2 TIPS To change the rotational direction of the focus ring: + You can select the rotational direction of the focus ring to suit your preference for how the lens adjusts to the focusing point. EF"FOCUS RING” (P. 103) For information on whether the subject is in focus (Focus aid}: When you focus the lens on à subject manually (by turning the focus ring), the AF confirmation mark lights. When E::] is set with [AF AREA], AF confirmation lights up if the subject is in focus atthe center AF target (Only when using the view finder) To adjust focus precisely (MF assist}: + You can check the subject enlarged on the display by rotating the focus ring while shooting with le view. LSMF ASSIST”(P. 103) Simultaneous use of S-AF mode and MF mode (S-AF+MF) This function allows you to fine-adjustthe focus manually by tuning the focus ring after AF is performed in the S-AF mode.

• Press the shutter button halfway. After AF is confimed, rotate the focus ring to fine-adjust the focus Q notes + Ifthe shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is actvated and your adjustments are canceled Simultaneous use of C-AF mode and MF mode (C-AF+MF) Focus with the focus ring and press the shutter button halfway to activate C-AF mode + While the shutter button is kept pressed, MF cannot be used. D + When the shutter button is not pressed, focusing with MF is possible. Suopuny Bunoous pue Buisn>04 F 2 TIPS Another way to adjust focus manually in C-AF mod! » You can setthe AEL/AFL button to operate C-AF. ES "AEL/AFL"(P. 105) Q notes

• Ifthe shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is actvated and your adjustments are canceled

se 4 a XY7” s0033_e 00 0 unified.book Page 56 Sunday, December 5, 2010 2:59 PM AF target selection This camera has 11 AF targets for focusing on the subject with auto focus. Selectthe optimal AF target mode according to your subject and the composition. There are two AF target modes: All target AF mode, which uses AF atall AF targets, and Single target AF mode, which uses AF centering around one selected AF target “HJAII target AF mode The camera automatically focuses on the subject in front of the camera from among the 11 AF targets. This is useful for shooting moving subjects or relying on the camera for focusing L: ISingle target AF mode {L- 15 Small-single target AF mode) The camera focuses using one selected AF target. This is useful for accurately focusing on the subject after composing the shot. With [- ], you can focus using a range thatis somewhat larger than one AF target, but you can only setthe range within the AF target. When ISMALL] is selected for [AF SENSITIVITY], the setting Ï display changes to [ ]s. ES "AF SENSITIVITY" (P. 103) suonuny Sunoous pue Bursn204 [.

+JDynamic-single target AF mode Ifthe camera cannot focus on the subject using the selected AF target, the camera focuses using the adjacent LIT AF target. TA Selected AF target su £ EN £

É & 50033 e_00_0_unified.book Page 57 Sunday, December 5, 2010 2:59 PM

Uorrectoutton +2 + When the button is released, the currentiy selected AF targetlights. When [ « ] or [1 is set, you can selectthe AF target to be used at that point. For operation, refer to Step 2 in “Selecting the AF target position" (ESP. 57) in the next section. I Super control panel © » (1: IAF AREA]» ml+2= + When L: Jor [1 is set, you can tum the dial to select the AF target MENU bution

IL27 MENU » [9,]» [69] » [AF AREA]

+ When L« Jor [1 is set, you can select the AF target with Selecting the AF target position Select the AF target to use with Single target AF mode. 1 press the [ivi] button and release your finger to enable selection ofthe AF target. 2 Use the main dial/sub dial or arrow pad to select the AF target. + Use the main dial to perform the same operation as 5 @®, and use the sub dial to perform the same t-50 operation as G. + Press the © button to return the position ofthe AF target to the center. PS EéDe 1e De 2 TIPS Selecting the operation when the AF target is selected: > You can change the operation of the dials and arrow pad for selecting the AF target. LS ri] SET UP" (P. 102) Selecting the position of the AF target with the arrow pad without pressing the [ir] button: > Press the shutter button halfway and release it, then use the arrow pad to change the position of the AF target. ES ‘BUTTON FUNCTION”(P. 106) Performing AF with the specified point: > You can perform AF with the position and size ofthe enlargement frame. EF "Enlarged display operation” (P. 40) Q notes + While shooting using live view, the dynamic-single target AF mode cannot be used Suopuny Bunoous pue Buisn>04 F

\Ÿ7_ 0033 e_00_0_unified.book Page 58 Sunday, December 5, 2010 2:59 PM

suo, Registering an AF target mode You can register a frequentiy used AF target mode and the position of thatAF target. You can then quickly load that registered setting (‘home position”) and use itwhen shooting, ren MENU » [e,]» [69] » [Gwi]SET HOME] Registering L_selectthe position ofthe AF target and press the © button, L--1SET HOME + The home position is registered atthe time the buttons are pressed. + The home position cannot be registered when operating through the direct button. Indicates thatthe AF target is being registered. Shooting In order to use this function, assign [CJHOME] to any of the Fn button, [si] button orthe © {preview button in advance. LP. 106 1 Press the button to which IEJHOME]is assigned. + The registered home position is selected. Press this button again to switch to the original AF target mode Q notes + The AF sensitivity is not recorded when registering the home position.

a & 50033 e_00_0_unified.book Page 59 Sunday, December 5, 2010 2:59 PM

Sequential shooting Single-frame shooting 3 Shoots 1 frame at a time when the shutter button is pressed {normal shooting mode) Sequential shooting H ŒH Shoots at 5 frames/sec. for as long as the shutter button is pressed (during S-AF, MF). Sequential shooting L ŒuL … Shoots atthe set speed (5 “Œ fps” (P. 108)) for as long as the shutter button is pressed. + Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. + Focus, exposure, and white balance are locked atthe first Number of sequential shots frame (during S-AF, MF). Lhatcanbeaken Q notes + During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save allofthe pictures depending on how much battery power remains: Setting method

Sge-Farme—?# | î Shooting l Sequential shooting H_: &-d #4 = Sequential shootngL :h-d L En 12-second sel-timer GSEir © Ü12 2-second self-imer SEtr à Ÿ 2 Remote control k+-d & = 2-second remote control: +-d 2 2 + Anti-shock display: À blinking display in the viewfinder or on the control panel and the # symbol on the super control panel indicates that anti-shock is activated.

& 50033 e_00_0_unified.book Page 60 Sunday, December 5, 2010 2:59 PM Self-timer shooting This function lets you take pictures using the selftimer. You can setthe camera to release the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting. For the seing method, see “Sequential shooting" (LEP. 59). Press the shutter button all the way. Selftimer lamp + When Ÿ)12s is selected: First, the self-timer lamp lights up for approximately 10 seconds, then it blinks for approximately 2 seconds and the picture is taken + When Ÿ)2s is selected: The selftimer lamp blinks for approximately 2 seconds, and then the picture is taken. + To cancel the activated self-timer, press the à) button. Q notes + Do not press the shutter button while standing in front of the camera; this could result in the subject being out of focus since focusing is performed when the shutter button is pressed halfway. Eyepiece shutter When shooting without looking through the viewfinder, close the eyepiece shutter to block the viewfinder so that light does not enter the viewfinder and change the exposure. Liftthe eyepiece shutter lever. Eyepiece shutter lever Remote control shooting E By using the optional remote control (RM-1), you can take a picture with yourself in it or a night scene without touching the camera. The camera can be set to release the shutter either right away or 2 seconds after the shutter button on the remote control is pressed. Bulb shooting is also possible when using the optional remote control. For the setting method, see “Sequential shooting" (EF P. 59). + Eyepiece shutter LEP. 60 Mount the camera securely on a tripod, pointthe remote control at the remote control receiver on the camera and press the shutter button on the remote control. + When 40s is selected : The focus and exposure are locked, the remote control lamp blinks and the picture is taken. + When ë2s is selected : The focus and exposure are locked, the remote control lamp blinks, and after approximately 2 seconds the picture is taken. Remote control lamp Remote control receiver

50033 e_00_0_unified.book Page 61 Sunday, December 5, 2010 2:59 PM Transmitted signal effective area Pointthe remote control atthe remote control receiver of the camera within the effective area 3s shown below. When powerful lighting such as direct sunlightis shining on the remote control receiver, or when fluorescent light or devices emiting electrical or radio waves are nearby, it could narrow the effective area Approk, 3m (,

nent co (EUQ - 3r 1640) (de) ST Socèssss Approx. EPL) 15. __—— \doof) rot Rae Ge eutdoo!) Remote control receiver STIPS The remote control lamp does not blink after the shutter button on the remote control is pressed: —> The transmitted signal may not be effective ifthe remote control receiver is exposed to powerful lighting. Move the remote control closer to the camera and press the shutter button on the remote control again. > The transmitted signal may not be effective ifthe remote control is too far from the camera. Move the remote control closer to the camera and press the shutter button on the remote control again. — There is signal interference. Point the remote control toward the remote control receiver on the camera and press and hold down the CH button and the W or T zoom button on the remote control atthe same time for at least three seconds until the remote control lamp on the camera links or à beep sound can be heard, indicating that the signal has been received To cancel the remote control shooting mode: — The remote control shooting mode will not be canceled after shooting. Press the &/ $C button to set to [CI] (single-frame shooting), etc. To use the shutter button on the camera in the remote control shooting mode: — The shutter button on the camera still works even in the remote control shooting mode. Q notes + The shutter wil not be released ifthe subject is not in focus. + Under bright light conditions, the remote control lamp may be difficult to see, making it hard to determine whether or not the picture has been taken. + Zoom is not available on the remote control. Bulb shooting with the remote control While holding down the MODE button, turn the main dial to setthe shooting mode to [BULB]. ES ‘Bulb shooting” (P. 45) Press the W button on the remote control to open the shutter. When the time set in "BULB TIMER" (LP. 112) elapses, the shutter closes automatically Press the T button to close the shutter.

suonuny Sunoous pue Bursn204 [. & 50033 e_00_0_unified.book Page 62 Sunday, December 5, 2010 2:59 PM You can selectthe interval from the time the mirror is raised until the shutter is released. This diminishes camera shake caused by vibrations when the mirror moves. This feature can be useful in astrophotography and microscope photography or other photographic situations where a very slow shutter speed is used, and camera vibration needs to be kept to à minimum. L MENU» 1e,1> (1 » IANTISHOCK(4I] 2 Selectthe time delay after the mirror is raised and until the shutter is released from 1/8 to 30 seconds and press the © button. 3 anti-shock is added to the shooting functions individually (single-frame shooting, sequential shooting, self-timer shooting, and remote control shooting). For the setting method, see “Sequential shooting” (LP. 59). Image stabilizer [IS | You can reduce the amount of camera shake that easily occurs when shooting in low light situations or shooting with high magnification. OFF Image stabilzeris off. 1S.1 Image stabilzer is on

1.2 This is used for panning with the camera in the horizontal direction to achieve a

blurred background. The horizontal image stabilizer is tumed off, and only the vertical image stabilizer is activated This is used for panning with the camera in the vertical direction to achieve a blurred background (tiing). The vertical image stabilizer is tumed off, and only the horizontal image stabilizer is activated.

Ed | & 50033 e_00_0_unified.book Page 63 Sunday, December 5, 2010 2:59 PM Setting the focal length By setting in advance the focal length of the lens, you can use the image stabilzer function with lenses other than Four Thirds system lenses. This setting is deactivated when a Four Thirds system lens is attached. L press the F3 button when the image stabilizer is turned on. 2 use the dial or ©@ to set the focal length and press ©. + Choose the value that most closely matches to the one thatis printed on the lens. + You can assign [IS MODE] to the Fn button to use itas a direct button. Q notes + The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, itis recommended that You use à tipod. + When using à tipod, set [IMAGE STABILIZER] to [OFF]. + When using à lens with an image stabilization function, turn off the image stabilization function of either the lens or the camera. + IMAGE STABILIZER] is set to [L.S.1], [LS.2]0r [LS.3] and you turn off the camera, the camera will vibrate. This is due to the camera initializing the image stabilizer mechanism. Without this initialization, the image stabilizer may not be able to achieve the proper effect. + Ifthe image stabilizer icon links in red on the monitor, it indicates a failure of the image stabilizer function. If you take à picture as is, the composition may be off. Consult your Olympus Authorized Service Center.

\Ÿ7 50033 e 00_0_unified.book Page 64 Sunday, December 5, 2010 2:59 PM Record mode, white balance, and picture mode Selecting the record mode You can select a record mode in which to take pictures. Choose the record mode thatis best for your purpose (printing, editing on à PC, website ediing, etc.) Recording formats JPEG ForJPEG images, select a combination of image size (I8, I, FN, 8). An image consists of pixels (dots). and compression rate (SF, When you enlarge an image with a low pixel count, itwill be displayed as a mosaic. If an image has a high pixel count, the fill size {amount of data) will be larger and the number of storable stl pictures will be lower. The higher the compression, the smaller the flle size. However, the image will have less clarity when played back. Image with a high pixel count Image with à low pixel count

Image becomes clearer Compression rate ication | Numberof | Pixel [SFEuper | F N 8 Application | bixels count Fine) (Fine) | (Normal) | (Basic)

ÿ (Large) | 4032x3024 | ISF Ci EN LE $ 3200 x 2400 8 Dscictiorte | DiMidde) [2560x1920 | msr mr En LE] 5 Mlontsre 1600 x 1200 3 1280 x 960 Ê 1024 x 768 pr 8 (Small) BF 6F EN LE) sized print x j and use on a 540 x480 3 lle: RAW This is unprocessed data that has not undergone changes in white balance, sharpness, contrast or color. To display as an image on the computer, use OLYMPUS Viewer 2 or lib] software. RAW data cannot be displayed on a different camera or by using common software, and it cannot be selected for print reservation. RAW flls are assigned an “ORF" file extension. RAW images can be edited with this camera and saved as JPEG data. [& “ditng still images” (P. 93)

É & 50033 e_00_0_unified.book Page 65 Sunday, December 5, 2010 2:59 PM

Selecting the record mode JPEG For] PEG, you can register 4 combinations of images sizes ([8, M, B) and compression rates (SF, F, N, B) from the 12 total combinations available. Er“: SET” (P. 114) When you selectthe I or B image size, you can further select the pixel size. EE PIXEL COUNT” (P. 114) JPEG+RAW Records both a PEG and RAW image atthe same time each time you take a picture. RAW Records the image in RAW data format. e.g.) The following 9 record modes are available when (BF /MN/DN/BN are registered RAW RAW

JPEG4RAW : MF4RAW/DN+4RAW/DN4RAW/BN4RAW I Super control panel ©vir: Lens MENU » [6j » [ STIPS To quickly set the record mode: » By registering IRAW-<-] to the Fn button, [ri] button or the © (preview) button, you can tum the dial while pressing the button to change the record mode. Each time you press the button, you can easily switch between | PEG data only and JPEG and RAW data. C3 LS "BUTTON FUNCTION” (P. 106) To find outthe file size/number of storable si pictures for each record mode: + “Record mode and file size/number of storable still

pictures" (ESP. 144) SET+OK) Setting the image aspect You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures using live view. Depending on your preference, you can set the aspect ratio to [4:3] (standard), [16:9], (3:21 [6:6], [5:4], (7:61, (6:51, [7:5], or [3:4] | PEG images are timmed and saved according to the aspect ratio. I Super control panel Lens MENU » [0] » [IMAGE ASPECT] Q notes + RAW images are nottrimmed and are recorded with the aspect ratio information atthe time of shooting. + During RAW image playback, images are displayed with a border based on the aspect ratio.

pou eumoid pue ‘SDuereq sun ‘opouu paoTou [] É \Ÿ7_ 0033 e_00_0_unified.book Page 66 Sunday, December 5, 2010 2:59 PM TIPS To change the aspect ratio of recorded images: > You can only change the aspect ratio when the aspect ratio of the image is set to [4:31. LS "Editng still images” (P. 93) To trim recorded images: > You can only trim images when the aspect ratio of the image is set to [4:3]. LS "Editing still images” (P. 93) To shoot with the image aspect ratio when using the view finder: > Set[ASPECT SHOOTING] to [ALL] LSF'ASPECT SHOOTING"(P. 115) Selecting the white balance Color reproduction differs depending on the light conditions. For instance, when daylight or tungsten lighting is reflected on white paper, the shade of white produced will be slightiy different for each. With à digital camera, white color can be adjusted to reproduce more natural white with a digital processor. This is called white balance. There are 4 options for setting the WB with this camera. Auto white balance [AUTO] This function enables the camera to automatically detect white in images and adjustthe color balance accordingly. Use this mode for general use. Preset white balance EXKIQ II IESIE"E NES] 7 different color temperatures are preset according to the light source. For example, use preset WB when you want to reproduce more red in the picture of a sunset, or capture a warmer artstic effect under artificial lighting, Custom white balance [CWB] You can setthe color temperature from 2000K to 14000K. For details on color temperature, refer to ‘White balance color temperature" (EE P. 143) One-touch white balance LOLCILCHILCHI You can setthe optimum white balance for the shooting conditions by pointing the camera at à white object ike a sheet of white paper. The white balance achieved with this setting is saved as one ofthe preset WB settings. WB mode Light conditions Used for mostlight conditions [when there is à white portion framed in the AUTO | iewfinder). Use this mode for general use. For shooting outdoors on à clear day, or to capture the reds in à sunset or the Colors in à fireworks display For shooting outdoors in the shadows on à clear day For shooting outdoors on à cloudy day 3000K | For shooting under a tungsten light 4000k | For shooting under fluorescent lighting E] For shooting underwater weÿ 5500K | For flash shooting Gi toc | Colortemperature set by one-touch WB. A T4 | 1 Setting the one-touch white balance” (P. 69) cs Color temperature set in custom white balance menu. This can be set from 2000K to 14000K. The factory default seting is 5400K.

É & 50033 e_00_0_unified.book Page 67 Sunday, December 5, 2010 2:59 PM

Setting the auto/presetcustom white balance Horectoutton WB+TIZ I Super control panel ©vt + Custom white balance is set by selecting [CWB] and tuming the dial while pressing down the F4 button. Lens MENU » [e,]» [&3] > [WB] Setting display Viewfinder Color temperature WB mode + During custom white balance, the color temperature is displayed Pne 4 Control panel

2 TIPS When subjects that are not white appear white: » In the auto WB setting, ifthere is no near-white color in the image framed in the screen, the white balance wil not be correctly determined. In such a case, ty preset WB or one-touch WB settings. White balance sensor This camera has a white balance sensor for determining the light source in the shooting environment. The white balance sensor measures and calculates the infrared and visible light, and determines whether the light source is sunlight, fluorescent lighting, floodlighting, à blue flat lamp, or other lighting. When shooting, be careful not to cover or White balance sensor shade the sensor.

& 50033 e_00_0_unified.book Page 68 Sunday, December 5, 2010 2:59 PM WB compensation This function lets you make fine changes to the auto WB, presetWB settings and the one- touch WB I Direct button WB +{4 » 2: adjustin A direction/ 57: adjust in G direction + Use the sub dial to sein the A direction or the main dil to setin the G direction. I Super control panel © » €: [W52] Pre MENU » [9,1» [83] » [WB] + Selectthe white balance to adjust and press ). Adjusting the white balance in the A direction (Amber- Blue) 3 AUTO Depending on the original WB conditions, the image will become more amber when adjusted toward +, and bluer when adjusted toward - Adjusting the white balance in the G direction (Green- Magenta) Depending on the original WB conditions, the image will become greener when adjusted toward +, and magenta when adjusted toward - + The white balance can be adjusted in 7 increments in Direct buttons setting screen pou eumoid pue ‘SDuereq sun ‘opouu paoTou [] A A & each direction ee Setting display eg. 1) When the A direction and G direction are each adjusted toward - Viewfinder Control panel Adjusttward G:-2 c vie

Adjusttoward A: -3 eg. 2) When the A direction and G direction are each adjusted toward + Viewfinder Control panel Adjusttoward G: +2 c NL AN Tr Adjusttoward A: +3 L EN À NA LA A A 8 + &

É 97” 0033 e_00_0_unified.book Page 69 Sunday, December 5, 2010 2:59 PM 2 TIPS Checking the white balance you have adjusted: > After setting the compensation value, point the camera at the subject to take test shots. When the AEL/AFL button is pressed, sample images that have been taken with the current WB settings are displayed. Adjusting all WB mode settings at once: » See ALL MED" (ESP. 113). Setting the one-touch white balance This function is useful when you need a more precise white balance than presetWB can provide. Point the camera at a sheet of white paper under the light source you wantto use to determine the white balance. The optimum white balance for the current shooting conditions can be saved in the camera. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures. Assign LC] to any ofthe Fn button, Gi] button or the © (preview) button in [BUTTON FUNCTION] in advance.([&P. 106) 1 pointthe camera at a sheet of white paper. + Position the paper so that it fills the viewfinder. Make sure there are no shadows.

2. while holding down the button to which LC] is assigned, press the shutter

button. + The one-touch white balance screen appears. 3 Select between LE31t0 LEA] and press the © button. + The white balance is registered. + The registered white balance will be stored in the camera as a preset WB setting. Turning the power off does not erase the data + Alternatively, press the WB button to select between [LE] to LEA] then press the F4 button to register the white balance. 2 TIPS After pressing the shutter button, [WB NG RETRY] is displayed: + When there is not enough white in the image, or when the image is too bright, too dark or the colors look unnatural, you cannot register the white balance. Change the aperture and shutter speed settings, then repeat the procedure from Step 1. WB bracketing Three images with different white balances (adjusted in specified color directions) are automatically created from one shot. One image has the specified white balance, while the others are the same image adjusted in different color directions. I Direct button WB + MODE » 2: EV step in A-B direction/ 7: EV step in G-M direction + Use the sub dial to sein the A-B direction or the main dial to setin the G-M direction. Lens MENU » [G] > IBRACKETING]» [WB BKT]

A A Ÿ7_ 0033 e_00_0_unified.book Page 70 Sunday, December 5, 2010 2:59 PM N 72 æ Setting display When using the direct button EV Step in 4e G-M dirons — 2STEP Viewfinder EV step in the A-B direction: 717 ASTEP Control panel + Select from [OFF], [3F 2STEP], [3F 4STEP], or[3F 6STEP] for the EV step for both the A-B (amber-blue) direction and the G-M (green-magenta) direction + When the shutter button is pressed down all the way, 3 images adjusted in specified color directions are A8 ou automatically created. When using the menu D srasee M0 BACK9ÉES SET» OK) TIPS To apply WB bracketing to the white balance you have adjusted: > Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to the white balance you have adjusted Q notes + During WB bracketing, the camera cannot shootthe pictures ifthere is not enough memory in the camera and card for storing at least the selected number of frames È + This function cannot be used when the picture mode is set to an art filter. You can selectthe art filter or finish according to the shooting purpose.For image tones (finish), you can also fine-adjust image parameters such as contrast and sharpness for each item. The adjusted parameters are recorded in each picture effect mode

É & 50033 e_00_0_unified.book Page 71 Sunday, December 5, 2010 2:59 PM

LA-ENHANCE] _: Produces more impressive-looking pictures matched to the scene mode. LAVIVID] Produces vivid colors. ÉANATURAL] Produces natural colors ÉNMUTED] Produces flat tones. LÉSPORTRAIT] _: Produces beautiful skin tones IMONOTONE] : Produces black and white tone. [CUSTOM] Select one picture mode, setthe parameters, and register the setting. Press f) to adjust the parameter. The adjustable parameters differ depending on the items. The individual parameters are as follows. ICONTRAST]_: Distinction between light and dark ISHARPNESS] : Sharpness of the image ISATURATIONI: Vividness of the color SENTE IGRADATION] : Adjust tone (gradation) GRADATION AUTO TO] : Divides the image into detailed EFFECT STANDARD regions and adjusts the = EE SEE brghtness sepurately for each RE G SET EX) region. This is effective for images with areas of large CONTRAST contrast in which the whites CE appear too bright or the blacks appear to dark. INORMAL] _: Use [NORMAL] mode for general uses. THIGH KEY]: Gradation for a bright subject ILOW KEY] : Gradation for a dark subject. _ IEFFECT] : Setstheextentthatthe effectwilbe IE applied. (-ENHANCE) IB&W FILTER] : Creates a black and white image. The filter color is brightened and the complementary color is darkened. (MONOTONE) IN: NEUTRAL]: Creates a normal black and white image. Ie: YELLOW]: Reproduces clearly defined white cloud with natural blue sky. [Or: ORANGE]: Slighty emphasizes colors in blue skies and sunsets: IR: RED] Strongly emphasizes colors in blue skies and brighiness of crimson foliage. 16: GREEN] _: Stongly emphasizes colors in red ips and green leaves. (MONOTONE)

Select and press the © button:

97” 0033 e_00_0_unified.book Page 72 Sunday, December 5, 2010 2:59 PM epouu surmpid pue ‘o2uejeq yum ‘pou PLOOY Notes 9 EF POP ART] to (F5 DRAMATIC TONE] are not applied to RAW images + IFthe record mode is set to [RAW] and D POP ART] to [NY DRAMATIC TONE] are applied, the record mode is automatically set to [N+RAW] The grainy appearance of the picture may be emphasized when [NY POP ART] to DFÿ DRAMATIC TON] are applied. +When you setto [ÿ DRAMATIC TONE] while the ISO sensitivity is set to AUTO, the upper limit of the Sensitivity is 1600. You can setit to higher an 1600 by setting to other than ISO AUTO. In this case, however the fiter is less effective. In addition, the effect of the exposure compensation may not be obtained. +When any of [NY POP ART] through INK DRAMATIC TONE]is applied, [COLOR SPACE] on the menu is not available TIPS You can set whether to SETTINGS" (P. 111) Noise reduction This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE RÉDUCT.], you can letthe camera reduce noise automatically to produce clearer images. When setto [AUTO], noise reduction wil be activated only when te shutter speed is slow. When set to [ON], noise reduction will always be activated While noise reduction is activated, ittakes about twice the usual time to take a picture. play/hide each item on the screen, E37"PICTURE MODE

Pre MENU » [®,]» [&3] » [NOISE REDUCT.] + The noise-reduction process is activated after shooting. Noise reduction [ON] + The card access lamp blinks and [busy] is displayed on the viewfinder while noise reduction is operating. You Q cannot take more pictures until the card access lamp tums LAWB | off. Q notes + During sequential shooting, [NOISE REDUCT.] is [OFF] automatically + This function may not work effectively with some shooting conditions or subjects. Noise filter You can selectthe noise processing level. Use [STANDARD] for general use. [HIGH] is recommended during high sensitivity shooting. I Menu MENU » [®,]» [63] » [NOISE FILTER]

& 50033 e_00_0_unified.book Page 73 Sunday, December 5, 2010 2:59 PM Flash shooting Flash mode setting The camera sets the flash mode according to various factors such as fiing pattern and flash timing. Available flash modes depend on the exposure mode. The flash modes are available to optional extemal fiashes. Auto flash AUTO The flash fires automatically in low light or backlight conditions. To shoota subject with backlighting, position the AF target over the subject. Flash synchronization speed/Slow limi Shutter speed can be changed when the built-in flash fires. LS "#X-SYNC." (P. 112), “&SLOW LIMIT” (P. 112) Red-eye reduction flash © In the red-eye reduction flash mode, a series of pre-fiashes are emitted just before the regular = fiash fires. This helps accustom the subjects ES eyes to the bright light and minimizes the red : eye phenomenon. in SM/BULB mode, the ci flash always fires. @ notes The subjects eyes appear red + After the pre-flashes, ttakes about 1 second before the shutter is released. Hold the camera fimly to avoid camera shake. + Effectiveness may be limited ifthe subject is not looking directly at pre-flashes, or if the Shooting range is too far. Individual physical characteristics may also limit effectiveness. Slow synchronization (1st curtain) $SLOW The slow synchronization flash is designed for slow shutter speeds. Normally, when shooting with a flash, shutter speeds cannot go below a certain level to prevent camera shake. But when shooting a subject against a night scene, fast shutter speeds can make the background 00 dark. Slow synchronization allows you to capture both the background and the subject. Since the shutter speed is slow, be sure to stabilize the camera by using a tripod so as notto cause the picture to be blurred. ist cui Usuall, the flash fires right after the shutter fully opens. This is called 1st curtain, This method is usually used during flash shooting.

É 70083 e_00_0_unified.book Page 74 Sunday, December 5, 2010 2:59 PM NZ

Bupoous ysel4 [. Slow synchronization (2nd curtain) 4 SLOW2 2nd curtain flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the taillights streaming backwards. The slower the shutter speed, the better the effects tum out. In SM/BULB mode, the flash always fires. When the shutter speed is set to 2 sec. : 2 : 2nd eurtain ee 024 0 nds 15* Eurtain 1stcurtain flash fires 2nd curtain flash fires Shutter closes Shutter fully opens Slow synchronization (1st curtain)/Red-eye reduction flash ©SLOW While using slow synchronization with flash shooting, you can also use this function to achieve red-eye reduction. When shooting a subject against a night scene, this function allows you to reduce the red-eye phenomenon. Às the time from emittng pre-flashes to shooting is long in 2nd curtain synchronization, itis difficult to achieve red-eye reduction. Hence, only 15t curtain synchronization setting is available. flash # Fil The flash fires regardiess of the light conditions. This mode is useful for eliminating shadows on the subjects face (such as shadows from tree leaves), in à backlight situation, or for correcting the color shift produced by artificial lighting {especially fluorescent light). Q notes + When the flash fires, the shutter speed is set to 1/250 sec. or less. When shooting a subject against a bright background with the fil-in flash, the background may be overexposed. In this case, use the optional FL-50R external flash or à similar flash and shootin the Super FP flash mode. EF "Super FP flash" (P. 79) Flash off @ The flash does not fire Even in this mode, the flash can be used as an AF illuminator when it is raised. LS°"AF ILLUMINAT. (AF llluminator)" (P. 103)

É & 50033 e_00_0_unified.book Page 75 Sunday, December 5, 2010 2:59 PM ds ù Manual flash This allows the built-in flash to output a fixed amount of light To shoot with manual flash, set the number on the lens based on the distance to the subject. Ratio of amount of light GN: Guide number 150 200 (Equivalent to ISO 100) FULL GA) 18 (13) 14 916.5) 1n6 45 (33) 1/64 23(16 Calculate the f-number on the lens using the following formula GN x 150 sensitivity Aperture (number) = Distance to the subject (m) 10 14 20 28 40 56 80 | » Setting method 5 Uorrectoutton 4 Sù ë D I Super control panel Setting display Viewfinder Control panel Flash mode + For details on displaying the settings, refer to ‘Flash modes that can be setby shooting mode” (ESP. 142). EN Z LA ù

& 50033 e_00_0_unified.book Page 76 Sunday, December 5, 2010 2:59 PM Bu flash shooting If you shoot a subject using a lens thatis wider than 14mm (equivalent to 28mm on à 35mm film camera), the light emited by the flash may produce a vignette effect. Whether or not vignetting occurs also depends on lens type, hood and shooting conditions (such as distance to the subject). L press the & UP button to raise the bu flash. SUP buton 2 Press the shutter button halfway. + The & (flash stand-by) mark lights when the fiash is ready to fire. IFthe mark is linking, the flash is charging. Wait until charging is complete Press the shutter button all the way. Viewfinder TIPS To shoot without having to wait for the flash to finish charging: > See "RLS PRIORITY S/RLS PRIORITY C"(EÆP. 108). Q notes + When [$RC MODE] is set to [ON], the built-in flash will fire only to communicate with the external flash so it will not function as à flash. E& "Shooting with the Olympus wireless RC flash system” (P. 80) Flash sity control The flash intensity can be adjusted from +3 to -3 In some situations (e.g., when shooting small subjects, distant background, etc.), you may get better results by adjusting the amount of light emitted by the flash (“lash intensity"). Itis useful when you intend to increase the contrast (distinction between light and dark) of images to make the images more vivid.

É & 50033 e_00_0_unified.book Page 77 Sunday, December 5, 2010 2:59 PM ds N 2] 4 I Direct button +42 I Super control panel © » ir: [F2] Setting display Viewfinder 2 TIPS To adjust the flash using only the dia + Assign the flash intensity control function to the main dial (or sub dial). &&*DIAL FUNCTION” (P. 104)

> Q its > + This does not work during manual flash. + This does not work when the flash control mode on the electronic flash is set to MANUAL. + Ifflash intensity is adjusted on the electronic flash, it will be combined with the camera's flash intensity setting. + When [62+#] is set to [ON], the flash intensity value will be added to the exposure compensation value. 9 "62+44" (P. 112) Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot, The camera shoots 3 frames at a time with the following amount of light: optimum light, light adjusted in the - direction, and light adjusted in the + direction.

IL27 MENU » [&;] > IBRACKETING] » [FL BKT]

+ The compensation value will change according to the EV step. [SE STEP" (P. 111) + In single-frame shooting, the amount of light emitted by. the flash changes every time the shutter button is TE 3FOZEV pressed + In sequential shooting, hold down the shutter button until the selected number of frames are taken. + Releasing the shutter button stops flash bracketing shooting. When it stops, blinks in the viewfnder = SET+OK) and on the control panel and is displayed in green on the super control panel. 3F LOEV

A A \Ÿ7_ 0033 e_00_0_unified.book Page 78 Sunday, December 5, 2010 2:59 PM NA æ External flash shooting In addition to the camera's butin flash capabilies, you can use any of the extemal flash units specified for use with this camera. This enables you to take advantage of a wider variety of fiash shooting techniques to suit different shooting conditions. The extemal flashes communicate with the camera, allowing you to control the camera's flash modes with various available flash control modes, such as TTL-AUTO and Super FP flash. An external flash unit specified for use with this camera can be mounted on the camera by attaching it to the cameras hot shoe. You can also attach the flash to the flash bracket on the camera using the bracket cable (optional). Refer to the extemal flashs manual as well. Functions available with external flash units Optonal flash FLSOR | FL6R RFI TF2 TIL-AUTO, AUTO, MANUAL,

FP TTL AUTO, FP MANUAL

Flash control mode TTL-AUTO, MANUAL GN (Guide number) | GN50 (85 mm) GN36 (85 mm') (S0100) GN28 (24 mm')_| _GN20 (24 mm') ni GN22 RC mode 7 7 — — # The focal length ofthe lens that can be used (Calculated based on 35 mm film camera) Q notes + The FL-40 optional flash cannot be used Using the external electronic flash Be sure to attach the fiash to the camera before tuming on the flash's power.

Bunoous ysel4 [. 1 _ Remove the hot shoe cover by sliding it in the direction indicated by the arrow in the illustration. + Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting Hot shoe cover 2 Attach the electronic flash to the hot shoe on the camera. + Ifthe lock pin is protruding, turn the shoe lock ring as far as it will go in the direction opposite to Fock This will pull the lock pin back inside. Lock pin Locking

É & 50033 e_00_0_unified.book Page 79 Sunday, December 5, 2010 2:59 PM

3 Turn on the flash. + When the charge lamp on the flash lights up, charging is complete. + The flash will be synchronized with the camera at a speed of 1/250 sec. or less. Select a flash mode. Selectthe flash control mode. + TTL-AUTO is recommended for normal use. 6 Press the shutter button halfway. + Shooting information such as ISO Sensitivity, aperture value, and shutter speed is

communicated between the camera and flash. 7 Press the shutter button all the way. Q notes + The built-in flash cannot be used when an extemal flash is attached to the hot shoe. Super FP flash Super FP flash is available with the FL-50R or FL-36R. You can use the Super FP flash even where normal flashes cannot be used with high shutter speed. Filkin flash shooting with the aperture open (such as in outdoor portrait shooting) is also possible with Super FP fash. For details, refer to the external flash's manual

Ed | & 50033 e_00_0_unified.book Page 80 Sunday, December 5, 2010 2:59 PM & | æ Bunoous ysel4 [..] Shooting with the Olympus wireless RC flash system Wireless flash shooting is possible with the Olympus wireless RC flash system. With this wireless flash system, you can take pictures using multiple wireless flashes and control the fashes in three groups (A, B, and C). The buit-in flash is used to communicate between the camera and the extemal flashes. For details on using the wireless flash, see the manual of the external flash. Wireless flash setup range Position the wireless flash so that the wireless sensor faces the camera. The setup range guidelines are as shown below The range changes according to the surrounding environment. Remote sensor Direction of the emitted Direction of. the camera

L_ position the flash while referring to the “Wireless flash setup range”, and turn on the flash. 2 Press the MODE button on the flash to setitto RC mode, and setthe channel and group of the flash. 3 SetRC mode on the camera to [ON].

+ The super control panel switches to RC mode. + You can press the INFO button to switch the super control panel display e- + 1e

Ed | & 50033 e_00_0_unified.book Page 81 Sunday, December 5, 2010 2:59 PM & | æ 4 Use the super control panel to setthe flash mode and other settings for each group. Flash intensity value Group Normal flash/Super FP flash + Selectthe flash + Switch between normal flash control mode and and Super FP flash. adjustthe flash intensityindividually for groups À, B, and Communication light level ©: For MANUAL, +‘Setthe communication ligntlevel selectthe flash *0 HHI} [MID or ILO intensiy. , Channel nr Day + Setthe communication channel to êe same chanel used on the

Select a flash mode. + Red-eye reduction flash is not possible in RC mode. Press the $ UP button to raise the built-in flash. After shooting preparations are completed, take some test shots to check the flash operation and images. Begin shooting while checking the charging completed indications of the camera and flash. Q notes + Although there is no limit to the number of wireless flashes you can use, itis recommended that each group have no more than three flashes to prevent flash malfunction due to mutual interference. + In RC mode, the buil-in flash is used to control the wireless flash, The buil-in flash cannot be used for flash shooting in this mode. + For 2nd curtain synchronization, setthe shutter speed and anti-shock settings to within 4 seconds. Wireless flash shooting may not operate properly when using à slower shutter speed or ant-Shock setting œo Oo ui

Bunoous ysel4 [. É \Ÿ7_ 0033 e 00 0 unified.book Page 82 Sunday, December 5, 2010 2:59 PM Using commercially available flashes You cannot use the camera to adjust the amount of light emitted from à commercially available flash except for a flash specified for use with this camera. To use à commercially available flash, connect to the hot shoe or connect the synchronization cord to the external flash connector. Setthe camera's shooting mode to M. For details on non-specified commercial fiashes, see “Non-specified commercial flashes” (EP. 82). L_ Remove te hot shoe cover to connectthe flash Hot shoe cover unit to the camera. 2 setthe shooting mode to M, then setthe aperture value and shutter speed. + Setthe shutter speed to 1/250 sec. or slower. Ifthe shutter speed is faster than this, commercially available flashes cannot be used. + À slower shutter speed may produce blurred images. 3 rumonthe flash. + Be sure to turn on the flash after attaching the flash unit to the camera. 4 Setthe ISO sensitivity and aperture value on the camera to match the flash control mode on the flash. + Refer to the flash's manual for instructions on how to set its flash control mode. Q notes + The flash fires each time the shutter is released. When you do not need to use the flash, tum off the flash's power. + Check beforehand that the flash you are using is synchronized with the camera.

Extemal flash connector Non-specified commercial flashes

1) Some commercially available flashes require a voltage of 250V or more for the

synchronization connector. The use of this type of flash can damage the camera or prevent the camera from operating properiy. Contact the manufacturer of the flash for the specifications of the flash synchronization connector.

2) Some commercially available flashes have a synchronization connector with reversed

polarity. This type of flash does not work with this camera. Contactthe manufacturer of the fiash

3) Exposures when using a flash require that adjustments be made on the flash. If a flash is

used in the auto mode, match it with the fnumber and ISO sensitivity settings on the camera

4) Even ifthe flash auto fnumber and ISO sensitivity are setthe same as on the camera, the

correct exposure may not be obtained depending on the shooting conditions. In such à case, adjustthe auto f-number or ISO on the flash or calculate the distance in the manual mode

5) Use a flash with an illumination angle that matches the focal length of the lens. The focal

length of the lens for 35 mm film is approximately twice as long as the focal length of the lenses designed for this camera

6) Do not use a flash unitor other accessory TTL flash that has additional communication

functions other than the specified flashes, since it may not only fai to function normally, but may also cause damage to the camera's circuitry.

& 50033 e_00_0_unified.book Page 83 Sunday, December 5, 2010 2:59 PM ( EE . Recording and viewing movies During live view, use the @(movie) button to record High Definition (HD) movies with sound.E& “Shooting” (P . 15) Recording movies 1 activate live view. + Press the [OI button when shooting the pictures using the vieu finder. 2 Setto the desired shooting mode. + The movie is recorded in a shooting mode when @@ {movie} button is pressed. However, itis recorded in P. (program shooting} mode when S (shutter priority shooting) has been set + IPF Optimal aperture is set automatically according to the brightness ofthe subject ISO Sensitivity is set to AUTO. + [AH Depiction of background is changed by setting the aperture. 1$0 sensitvity is set to AUTO. + IME You control both aperture and shutter speed. Selectthe shutter speed from values between 1/30 s and 14000 s Sensitivity can be set manually to values between ISO 200 and 1600. + PR3 to DR can be set as à picture mode of P/A/M. lOlbutton 3 Press the shutter button halfway to focus. 4 Press the @ (movie) button to begin recording. Press the @ (movie) button again to end recording. + Recording audio also begins at the same time. (When [MOVIE ®] is [ON].) 2 TIPS To shoot a still picture during recording a mo » Press the shutter button during recording à movie to pause the movie recording and shoot à still picture. After shooting Glowred during Recorded the still picture, movie recording is resumed. In this case three recording time files are recorded. To adjust focus again during recording a movie: » Press the AEL/AFL button or press the shutter button halfway to perform AF. + The sound made by the lens operating may be recorded. + By connecting à commercial available microphone to the microphone connector, the lens operation sound recorded can be reduced Q notes + When recording à movie, you cannot change the settings for exposure compensation and aperture value, and shutter speed. + FIMAGE STABILIZER] is activated while recording à movie, the recorded image is enlarged slighty. Even if[LS.2] or [L.S.3]is selected, the setting for [LS.1]is applied. + Stabilization is not possible when the camera shake is excessive. + When using à lens with the image stabilizer function, turn off the image stabilizer function of either the lens or the camera. + You cannot use [@ FACE DETECTI in movie mode. senou Buymoin

Ed | & 50033 e_00_0_unified.book Page 84 Sunday, December 5, 2010 2:59 PM + The size of each movie fl is limited to 268. With some types of card to be used, recording may be interupted unexpectedly before reaching the end of available recording time. + When the inside ofthe camera becomes hot, shooting is automatically stopped to protect the camera + While the card access lamp is blinking, the next recording is not allowed. + Itis recommended to use SD speed class & or higher compatible card for movie shooting + The camera may not correct display the recording time in art filter mode. Movies recorded in IART7] (DIORAMA) mode play back at high speed; during recording, the recording time is adjusted to reflect the playback time and advances more slowly than usual. + When the picture mode is setto [AAI-ENHANCE], the movie is recorded with [NATURAL]. Changing the movie record mode Hurecoi ©ræcrte1r 69 [| Menu MENU » [0j] » [€:]» [MOVIE] | 6] HD The number of pixels is 1280 x 720. You can record high-definition movies. sD The number of pixels is 640 x 480. À Recording sound \ EF J È I Live control »@& r1e1r 00 Î Pre MENU » [&,] > [BI] » [MOVIE @] Q notes + When recording sound in a movie, the sound made by the lens and camera operating may be recorded. + No sound is recorded in [ART7] (DIORAMA) mode. en £

É & 50033 e_00_0_unified.book Page 85 Sunday, December 5, 2010 2:59 PM ds N 2] 4 Viewing movies 1 pisplay a movie in single-frame playback and press the ©button. 2 Select [MOVIE PLAY] using © and press the © button to begin playback. + The following operations can be performed during movie playback. Pause or resume playback . + While playback is paused, press @ to display the fist frame and press @ to display the last frame. Press GŸ to rewind or advance one frame. Press ) and hold the button to rewind or advance in succession: fl 00-1470) — QE 6 | @/@ | Advance or rewind a movie. IS | Adjust volume. î S S &> È >

!À Playback functions Single-frame/Close-up playback The basic procedure for viewing pictures are as shown below ES \Ÿ7_ 50033 e 00_0_unified.book Page 86 Sunday, December 5, 2010 2:59 PM However, before using any ofthese functions, follow Step 1 below. You can setthe camera to automatically switch to single-frame playback mode after shooting. E'REC VIEW” (P. 99) 1 press the [5] button (Single-frame playback). + The last recorded image appears + The LCD monitor turns off after more than 1 minute if no operations are performed. The camera will turn off automatically if there is no operation after 4 hours. Turn on the camera again. 2 use G9 or 2 to selectimages you want to view. You can also tum 37 to switch to Q for close-up playback. + You can switch the operations of both dials. ESP. 104 (Single-frame playback) TER | (close-up frame-by-frame È | ÿ INFO Displays the next frame Displays the previous frame suopouny peqfeld PTESS We Fn Duton + Plays back the image at a 10x magnifled close-up position. button

• The menu forthe displayed image type is displayed. INFO/Fn {Close-up playback)

+ To exitthe playback mode, press the ©] button again. + Pressing the shutter button halfway resumes the Shooting mode. PS rs Ÿ LA (Close-up position playback) INFO button Fn button playback) Press QQ t view frame- by-frame close-ups When [@ FACE DETECT] is setto [ON], press © to move to another face in cose-up position Press (2 to move the display ofthe ciose-up position. When [® FACE DETECT] (ur P. 38) is setto [ON], à frame is displayed around a detected face. Press @ to move the frame to another face. Press (to change the close-up position: INFO/Fn

ï & / É \Ÿ7_ 0033 e_00_0_unified.book Page 87 Sunday, December 5, 2010 2:59 PM ds à D) D) L box display You can view the playback image and another image together on the left and right sides of the monitor. This is useful if you want to compare images you recorded using bracketing. L press the si] button during single-frame playback. Eng button + The frame being viewed is displayed on the left side of En button the monitor, and the next frame is displayed on the right INFO bu side. The image is displayed at the same magnification ofthe image being viewed. + The image on the left is the benchmark image. 2 press GO, 2 to select the image on the right. + You can protect, erase or copy the image on the right. 3 press the (ri button. + The camera returns to single-frame playback of the image on the left atthe magnification being viewed © button

Benchmark image ; Operations during light box display 5

• Pressing the © button replaces the image on the left with the image on the right and À becomes the new benchmark image Éd + You can use the dial to change the magnification of both images atthe same time. à + Pressing the Fn button or INFO button allows you to move the position of the image on the right with the € button. Pressing the Fn button or INFO button again allows you to move te positions of both images with the (2 button x : Selects the right image Scrolls the right image Scrolls both images in synchronization # You can also use the INFO button in the same way for this procedure. EN L

É & 50033 e 00 _0_unified.book Page 88 Sunday, December 5, 2010 2:59 PM

suonuny 1eqeld Index display/Calendar display This function lets you show several images on the monitor at the same time. This is useful when you want to quickly search a number of pictures to find a particular image. During single-frame playback, each time you turn the dial toward E=3, the number of images shown changes between 4, 9, 25 and 100 pictures. @ :Moves to the previous frame @ :Moves to the next frame & :Moves to the upper frame & :Moves to the lower frame + To retum to single-frame playback, tum the main dial to Q. = a (Calendar display) {200-rame index display)" (25-rame index display) *1_Itis displayed when “ÆJ/INFO SETTINGS” (DSP. 109) is [ON]. Calendar display With the calendar, you can display images recorded on the card by date. If more than one image was taken on a single date, the image shot frst on that date is displayed. to select a date and press the @ button to play back images for the selected date in

7 PS É ®7s0083_e_00_0_unified.book Page 89 Sunday, December 5, 2010 2:59 PM NZ æ

Information display This allows you to display detailed information about the INFO button image. Luminance information can also be displayed with histogram and highlight graphs Press the INFO button repeatedly until the desired information is displayed. You can also switch the information displayed by tuning the dial while pressing the INFO button. + This setting is stored and will be shown the next time the information display is called up. Image only Shooëng Highlight information Shadow display Y ou a. ] 4 #Histogram % 7 Ifthe bars in the histogram are ë higher on the right, the image may be too bright. the bars are higher [ner 5] on the left the image may be too : Overall * dark. Compensate the exposure or Histogram display El shoot again. À

HighlightSShadow'? Histogram display ? Over- or underexposed parts ofthe recorded image are Distribution of the displayed brightness ofthe Highlights (overexposed) parts will be shown in red. recorded image is Shadows (underexposed) parts wil| be shown in blue. displayed in a histogram {brighiness companent graph). “_itis displayed when ‘ŒS/INFO SETTINGS" (EF P. 109) is [ON] STIPS To quickly switch to the frequentiy used display: — You can hide the information display for all modes except "Simpliñed display. “ŒINFO SETTINGS" (LP. 109) — To change the waming tone range indicated on the Highlight&Shadow display

É 70083 e_00_0_unified.book Page 90 Sunday, December 5, 2010 2:59 PM NZ

This function displays images stored on the card one after another. The images are played back in order, starting with the displayed image. L menu, ne + Press the © button during playback to select slideshow MENU bution [BGM] Set BGM or turn BGM [OFF]. ISLIDE] : Setthe items for slideshow. ISLIDE INTERVAL] Sets interval at which to switch images from 2-10 seconds. [MOVIE INTERVAL] When playing a movie, select [FULL] to play the entire move, or [SHORT] to play to a section part-way through. s\ 3 select [STARTI and press the © button. ba + The slideshow will start. 4 Press the © button to stop the slideshow. Operations during slideshow + Press @@ to adjust the overall volume (only when playing back sound using the camera speaker) + Press @Ÿ while the volume adjustment screen is displayed to adjustthe balance between BGM and recorded sound Q notes + Ifthe slideshow is left running for about 30 minutes while using the battery, the camera will turn off automatically. suopouny peqfeld

de 4 L a \Ÿ7 50033 e 00 0 unified.book Page 91 Sunday, December 5, 2010 2:59 PM 7h æ Rotating images This function lets you rotate images and display them vertically on the monitor during single- frame playback. This is useful when taking pictures with the camera held vertically. The images will automatically be displayed in the correct direction even if the camera is rotated. L menu mie + When setto [ON], images shot vertically will be automaticaly rotated and displayed during playback. You can also press the Ed button to rotate and display the image. + The rotated image wi be recorded on the card in that position. Hg button Original image before rotating

Playback on TV 5 Use the AV cable provided with the camera to play back recorded images on your TV. d 1 rumthe camera and TV off, and AV OUT Eu À connectthe AV cable as illustrated. connector Éd 2 Turn on the TV and set it to the video ? inputmode. For details on switching to the video input mode, refer to the TV's manual. 3 Turn the camera on and press the 5] (playback) button. A cable AV in-jack {video/audio) r En Z

suopouny peqfeld É 97-0033 e_00_0_unified.book Page 92 Sunday, December 5, 2010 2:59 PM Q notes + To connect the camera to a TV, use the provided AV cable. + Make sure that the camera's video output signal type is the same as the TV's video signal type. EF 'VIDEO OUT” (P. 108) + The camera's monitor turns off automatically when the AV cable is connected to the camera + The image may appear off-center depending on the TV screen. Connection via HDMI mini-cable + Be sure to turn offthe camera and the TV before connecting the mini-cable. HDMI mini connector Connect ta the HDMI connector on the TV. {commercial available) HDMI terminal

Connectthe HDMI mini-cable to the HDMI connector of the TV. Connect the HDMI mini-cable to the HDMI connector of the camera. Turn on the TV and switch “INPUT” to “HDMI INPUT”. Tum on the camera. Notes + For details on changing the input source of the TV, refer to the TV: instruction manual. + Use an HDMI mini-cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV. + When the camera and TV are connected by both an AV cable and an HDMI mini-cable, HDMI wil take priority. © FUN + Depending on the TV's settings, the displayed images and information may become cropped. + When you connect to a TV via an HDMI mini-cable, you can select the format of the digital video signal. "HDMI" (LS P. 108) + You cannot shoot pictures or movies when the HDMI cable is connected. + Do not connectthe camera to other HDMI output devices. Doing so may damage the camera. + HDMI output is not performed while connected via USB to à computer or printer.

É & 50033 e_00_0_unified.book Page 93 Sunday, December 5, 2010 2:59 PM ds N Using the TV remote control The camera can be operated by a TV remote control when connected to a TV that supports HDMI control.

L MENU» E1> 169] » HDMI» [HDMI CONTROL]

• Setto [ON]. 2 operate the camera by using the TV remote control. + You can operate the camera by following the operation guide displayed on the TV. + During single-frame playback, you can display or hide the information display by pressing the: [Red] button, and display or hide the index display by pressing the [Green] button + Some functions may be unavailable, even if displayed, depending on the TV. mages Recorded images can be edited and saved as new images. Available editing functions depend on the image format (image record mode). A JPEG file can be printed as is without modification. À RAW fill, on the other hand cannot be printed as is. To print a RAW file, use the RAW edit function to convertthe RAW data format to JPEG. Editing images recorded in RAW data format The camera performs image processing (such as white balance and sharpness adjustment) on images in the RAW data format, then saves the data to a new file in the JPEG format. While checking recorded images, you can edit them to your liking. Image processing is performed based on the current camera settings. Change the camera settings to suit your preferences before editing. S Editing images recorded in J PEG data format SA ISHADOW ADJ] Brightens a dark backlt subject. 3 IREDEYE FIX] Reduces the red-eye phenomenon during flash shooting. 3 el Setthe timming size with the main dial and the timming position with the arrow pad. À | î

[ASPECT] Changes the aspect ratio of images from 43 (standard) t (8:21 [16:9] [6:61 (5:41, [7:61 [6:51 :51or 3:41. After changing the aspect ratio, use the arrow pad to specify the trimming position. [BLACK & WHITE] Creates black and white images. ISEPIA] Creates sepia-toned images ISATURATION] _ Sets the color depth. Adjust the color saturation checking the picture on the screen (Eal Converts the image file size to 1280 x 960, 640 x 480, or 320 x 240. Images with an aspect ratio other than 4:3 (standard) are converted to the closest image file size. Le-PORTRAIT] Make skin look smooth and translucent You may not be able to compensate depending on the image if face detection fails “The size ofthe compensated image is limited to [M] (2560 x 1920) or smaller.

À PS É ®7s0083 e_00_0_unified.book Page 94 Sunday, December 5, 2010 2:59 PM NZ æ ds N L MENU» > EDIT]? (SEL. IMAGE (Select Confim the data format from here Image)] + Selection is also possible during playback by pressing the © button. 2 use GO to select an image, then press the © button. + The camera recognizes the image data format. + Forimages recorded in | PEG4RAW, à selection screen will appear, asking you which data to edit. 3 the setting screen varies with the image data format. Selectthe item you want to edit and do the following steps. BACK+ù JPEG EDIT REDEYE FIX

ASPECT BLACK & WHITE

+ The edited image is saved as another image, apart from the original image. + To exitthe edit mode, press the MENU button. Q notes + Red-eye correction may not work depending on the image. Red-eye correction may affect other parts of the image, as well as the eyes. + Editing of a JPEG image is not possible in the following cases 7 When an image is recorded in RAW, when an image is processed on a PC, when there is not enough space in the card memory, when an image is recorded on another camera + When resizing (al) an image, you cannot select a larger number of pixels than was originally recorded. + Land [ASPECT] can only be used to edit images with an aspect ratio of 4:3 (standard), Adding sound to still pictures Add an audio recording (up 30 sec. long) to the current photograph.

L MENU» > EDIT]? (SEL. IMAGE)» 19]

+ Selection is also possible during playback by pressing the © button. 2 selectusing ©), then press the © button. [NO] No sound is recorded. [& START]: Audio recording start. [ES] Erases added sound. Q notes + You cannot record sound for protected images. + To stop recording part-way through, press the © button. suopouny peqfeld

A A 97-0033 e_00_0_unified.book Page 95 Sunday, December 5, 2010 2:59 PM N 72 æ Image overlay Up to 4 frames of RAW images taken with the camera can be overlaid and saved as à separate image. The image is saved with the record mode set atthe time the image is saved.

L MENU > > EDIT] » IMAGE OVERLAY]

+ Selection is also possible during playback by pressing the @ button. 2 Selectthe number of frames to overlay and press the © button. 3 use 1‘ to select a frame and press the © button. + Repeatedly select images only for the number of frames selected in Step 2 + To cancel your selection, press the © button again. IMAGE OVERLAY 4 use O9 to select an image, then use ©® to select the gain for each image. Press the © button. + Select from 0.1 to 2.0. « The displayed image changes as the gain is adjusted. 5 use ©@ to select IYES], then press the © button.

2 TIPS To overlay 5 or more frames: » To overlay 5 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY] repeatediy. Q notes + When the record mode is setto [RAW], the overlay image is saved as [N+RAWI. + When the picture mode is set to [ART] to [AG]. the overlay image is saved with ÉSNATURAL] suopouny peqfeld

& 50033 e_00_0_unified.book Page 96 Sunday, December 5, 2010 2:59 PM suonuny 1eqeld Copying images This function lets you copy images to and from the SD card and CompactFlash. This menu can be selected if both cards are inserted. The selected card is the copying source. EE

Play back the image you want to copy and press the GOPY/Dbuton COPY/L button. Use © to select [YES] then press the © button. Copying selected frames This function lets you select multiple images and copy them atthe same time during index display.

Selectthe image to copy on the index display, then press the © button. COPYSELECT Ei+Æ + The selected images will be shown with @f. + To cancel your selection, press the © button again. Ps After you have selected the images to copy, press the COPY/L button. No Use © to select [YES], then press the © button. BACK+e0 SET+{OK)

97” 0033 e_00_0_unified.book Page 97 Sunday, December 5, 2010 2:59 PM Protecting images Protect images you do not want to erase. Protected images cannot be erased by the single frame or all-frame erase function. Single-frame protect Play back the image you want to protect and press the On On button button. + ri (protect mark) is displayed on the top right comer of the screen. To cancel the protection Display the images that are protected and press the On button. Protecting selected frames This function lets you select multiple images and protectthem atthe same time during index display. 1 pisplay the images you want to protect and press the © button. + The selected images will be shown with @. + To cancel your selection, press the © button again. + Press 1% to select the images you want to protect and press the © button. - 2 After you have selected the images to protect, press the On button. Canceling all protections This function lets you cancel the protection of several images at one time.

1 MENU» 101» IRESET PROTECTI

Use © to select [YES], then press the © button. Q notes + Formatting the card erases all images even ifthey have been protected. LS ‘Formatting the card” (P. 136) + Protected images cannot be rotated even when the suopouny peqfeld utton is pressed

suonuny 1eqeld É \Ÿ7_ 0033 e_00_0_unified.book Page 98 Sunday, December 5, 2010 2:59 PM Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card or selected frame erase, which erases only the frames selected. Notes o + When you perform all-frame or selected frame erase on images recorded using RAW+] PEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the | PEG, RAW, or both RAW and/PÉG images. L&"RAW4 PEG ERASE”(P. 115) + Protected images cannot be erased. Cancel protected images, then erase them. + Once erased, images cannot be restored. ESF "Protecting images” (P. 97) Single-frame erase 1 Display the images you want to erase and press the button.

Erasing selected frames This function lets you erase selected images at one time during single-frame playback or index display. 1 Display the images you want to erase and press the © button. + The selected images will be shown with @f. + To cancel your selection, press the © button again. + Press 0 to select the images you want to erase and press the © button. 2 After you have selected the images to erase, press the 1 button. 3 use © to select IVES] then press the © button. All-frame erase L menu» 1j» [CARD SETUP] 2 use © to select IALL ERASE], then press the © button. 3 use © to select IVES] then press the © button. + All frames will be erased. TIPS To erase immediately: nu » IFyou have set'QUICK ERASE”" (EP. 115) to [ON] pressing the ff button will erase an image immediately. » You can Set the initial position ofthe cursor to [YES]. I"PRIORITY SET” (P. 116)

L. & 50033 e_00_0_unified.book Page 99 Sunday, December 5, 2010 2:59 PM Setup functions Use the Setup Menu to setthe basic camera functions. For details on using the menu lists, see “Setting on the [oo ren menu” (L# P. 22) ENG.

© nRmaRE BACK»iù SET+ OK) @ (Dateftime setting) LFP. 14 © (Changing the display language) You can change the language used for the on-screen display and error messages from ENGLISH to another language. IQ! (Monitor brightness adjustment) You can adjustthe brightness and color temperature of the monitor. S Use GŸ to switch between {j (color temperature) and x SA {brightness), and use @® to adjustthe value between [7] to [71 Seting to [AUTO BRIGHTNESS] allows the illumination sensor to measure the surrounding brightness and automatically get the monitor darker for optimal viewing REC VIEW You can display the picture you have just taken on the monitor while itis being recorded to the card, and to select how long the picture is displayed. This is useful for making a brief check ofthe picture you have just taken. Pressing the shutter button halfway while checking the picture lets you resume shooting immediately. HSEC]to [20SEC] Selects the number of seconds to display each picture. Can be setin units of 1 second [OFF] The picture being recorded to the card is not displayed IAUTOŒ] Displays the image being recorded, and then switches to playback mode. This is useful for erasing a picture after checking it 8, MENU DISPLAY LOFF] The custom menu is hidden on the menu screen. ION] The custom menu is shown on the menu screen.

se 4 a 7” s0033_e 00 0 _unified.book Page 100 Sunday, December 5, 2010 2:59 PM

FIRMWARE Your products firmware version will be displayed. When you make inquiries about your camera or accessories or when you want to download software, you wil need to state which version of each ofthe products you are using, RESET/MYSET Setting MYSET You can register the current camera setting condition as up to 4 MYSETS. Set the camera to desired condition and then register it. By registering it, you can select it as one of the shooting mode such as P/S/A/M. Also, you can assign it to the specified button ([Fn J{r1/© (Preview) in [BUTTON FUNCTION]. ES "BUTTON FUNCTION" (P. 106) Registering MYSET Pre MENU » [6j] » IRESET/MYSET]

1) Select between [MYSET1] to [MYSETA] and press the {) button.

2) Use @® to select [SET], then press the © button.

+ The current settings are registered in the camera. For details on the functions that can be registered to MYSET, refer to ‘Functions that can be registered with MYSET setting” (EP. 145) + To cancel the registration, select [RESET] Using the MYSET as a shooting mode À Uorectoutton MODE +57 Select the desired MYSET. + Assign MYSET1 to MYSETA to the Fn button (DS *BUTTON FUNCTION” (P. 106)) to use the short-cut MYSET shooting, Shoot while holding the Fn button Q notes + MYSET (My Setting)

É & 50033 e 00 0_unified.book Page 101 Sunday, December 5, 2010 2:59 PM

Changing each setting to MYSET setting while remaining the current shooting mode Lens MENU » [0] » [RESET/MYSET]

1) Select between [MYSET1] to [MYSETA] and press the © button.

2) Use @@to select [YES], then press the © button.

+ Each setting is setto the MYSET setting excluding some items such as P/S/A/M. For details on the functions that cannot be changed, refer to “Functions that can be registered with MYSET setting” (ESP. 145). Resetting the settings In this camera, the changed settings are retained when the power is tumed OFF. To resetthe settings, execute [RESET]. + Some settings are notreset. Reset operation Uorect button 1S0 +14] + Press and hold two seconds or more to display the menu.Use © main dial to select Pres MENU » [6}]» [RESET/MYSET] 1 select [RESET], then press the © button. Use @® to select [YES], then press the © button. BACKoES

L. & 50033 e 00 0_unified.book Page 102 Sunday, December 5, 2010 2:59 PM

Customizing your camera Use the Custom Menu to customize the shooting functions Custom Menu has 10 tabs (83 to Bi) that are divided according to the functions to be set. @ LAF/MF (P.102) # CUSTOM (P.112) BUTTON/DIAL {P.104) </ASPECT/COLOR/WB (P. 113) RELEASE/©j (p.108) RECORD/ERASE (p.115) DISP/m)/PC (P.108) MOVIE (P.117) EXP/EIS0 (P.111) QUTILITY (P.117) Or deals On uSNY ne MENU ISE, See "Setting on te menu” (LS P. 221. Custom Menu » £1 AF/MF

Select the AF target mode Ci] SET UP Selects the operation of the dials or arrow pad when selecting the AF target. IOFF] tops after moving to the AF target on the end ILOOP] After moving to the AF target on the end, moves to the AF target on the opposite end ofthe same row or column. Selects all AF targets before moving à to the AF target on the opposite end, and [AF AREA] is set to ISPIRAL] After moving to the AF target on the end, moves to the AF target on the opposite end of the next row or column. Selects all AF targets before moving to the AF target on the opposite end, and [AF AREA] is set to €:g.) When moving from the top left AF target to the right se nu ses l TOFF] TL ooP TSPIRAL] Setto Ex] Setto Hi. RESET LENS When set to [ON], this resets the focus of the lens infinity) each time the power is tumed off. BULB FOCUSING You can setthe camera to enable focus adjustments during bulb shooting with MF TON] During exposure, you can turn the focus ring and adjustthe focus IOFF] The focus is locked during exposure.

É & 50033 e 00 0_unified.book Page 103 Sunday, December 5, 2010 2:59 PM ds N FOCUS RING You can customize how the lens adjusts to the focal point by selecting the rotational direction of the focus ring, Itis not applied for the mechanically-focus lenses such as Olympus SWD lenses. Ç

MF ASSIST Setitto [ON] to automatically enlarge the subject on the monitor by rotating the focus ring while shooting in [S-AF MF] or [MF] with live view.

You can register the AF target mode and the AF target position that you use frequentiy as home position. Assign [ES ET HOME] to the specified button in (BUTTON FUNCTION]in advance to use the registered home position quickly during shooting. “BUTTON FUNCTION" (ES P. 106) PD AFL Setitto [ON] to perform phase difference AF (AF with the mirror lowered) by pressing AEL/ AFL button while shooting with live view. AF ILLUMINAT. (AF Illuminator) N The builtin flash can be setto function as an AF illuminator. This makes focusing easier in N @> low-light conditions using AF mode. To use this function, raise the flash. Itis available when > shooting with the phase difference AF (when shooting using the view finder) C-AF LOCK location where something passes in front of or behind the subject. tis available when shooting using the view finder.

When setto [OFF], the AF target does not light when the subject is in focus. AF SENSITIVITY You can setthe range of the AF target for focusing when [AF AREA] is set to [ +]. is available when shooting with the phase difference AF (when shooting using the view finder). [NORMAL] The camera focuses using a range that is somewhat larger than the selected AF target ISMALL] The camera focuses only within the selected AF target. When [SMALL] is selected, the setng display for [AF AREA] becomes [ : ]s. When setto [ON], during focusing with C-AF mode, this prevents the focus from changing even if the distance to the subject suddenly changes. This is effective when shooting at a

se 4 É Kÿ7” s0033_e_00 0_unified.book Page 104 Sunday, December 5, 2010 2:59 PM a rs SA 7 Custom Menu » 63 BUTTON/DIAL DIAL FUNCTION In P, A, S, or M mode, you can assign functions other than the default functions to the main dial and sub dial. You can also switch the operations ofthe main dial and sub dial for menu and playback operations with the default operations

M ISHUTTERJ/IFNo.] MENU : [oJIS / VALUE] Œ : (PREVNEXTUEQ] Sub dial Main dial + Lo1on [MENU] means the horizontal operation of the dial (the same as pressing G@). [&/ VALUE] means the vertical operation of the dial (the same as pressing 7 PS SA SA DIAL DIRECTION You can selectthe rotational direction ofthe dial and the direction in which the shutter speed/ aperture value will increase or decrease. | 9 Setting_ | © 2 (rotational direction ofthe dial) | & 2 (rotational direction of the dial)

• Siower shutter speed A | DiALL |: Openthe aperure (Fnumberis Fastershuer speed 0 cel * Close the aperture (number is increased) F : TStover shui spees 3 | oau2 | Fastershuterspeed + Open the aperture (f-number is È + Close the aperture (number increased) |" GP ne)

®7S0083_e 00 0_unified.book Page 105 Sunday, December 5, 2010 2:59 PM 7 æ PS A SA #7 AEL/AFL You can use the AEL/AFL button to perform AF or metering operations instead of using the shutter button Select the function of the button to match the operation when the shutter button is pressed. Select [model] to [mode4] in each focus mode. (You can only select [mode4] in C-AF mode.) Shutter button function AEL/AFL button function Mode Hapress Fuitpress Focus Exposure Focus Exposure Fous Exposure IS-AF] model | S4F Locked _ = = Locked mode | SF = = Locked = Locked mode3 = Locked = — SA — IC-AF] model | CAFstt | Locked Locked = = Locked mode2 | CAF start = Locked Locked — Locked modes — Locked Locked — CAF start — mode4 — = Locked Locked | CAF st — IMF] model = Locked _ = = Locked mode2 = = — Locked — Locked An mode3 = Locked = — SA — À SA x > Basic operations Imodel] For détermining the metered exposure while focusing. AE lock is activated while pressing the AEL/AFL button, allowing you to adjustthe focus and determine the exposure separately Imode2] _ For determining the exposure when you press the shutter button full. This is useful for shooting scenes with significant changes in lighting, such as on a stage. Imode3] _ For focusing with the AEL/AFL button instead of the shutter button: Imode4] _ Press the AEL/AFL button to focus, and press the shutter button fully to 0 determine the exposure $ Using phase difference AF during live view El Seting [PD AFL]t0 [ON] in IBM] allows to use the phase difference AF during live viewr Ë Shutter butfon function < AEL/AFL button function | ‘$ Mode Hapress Fuitpress É Fos | Eve Ras | Hpoue Ras [vue | ÿ IS-AF] i model | S4F Locked — — PDAF — mode | S4F — — Locked PDAF — modes — Locked — — PDAF — IMF] model — Locked — — — Locked mode2 — — — Locked Locked modes — Locked — — PDAF — B EN À 7 LA

\Ÿ7_ 0033 e 00 0 unified.book Page 106 Sunday, December 5, 2010 2:59 PM

You can lock and maintain the exposure by pressing the AEL/AFL button. [ON] Press the AEL/AFL button to lock and maintain the exposure. Press again to cancel the maintaining of the exposure. LOFF] The exposure will be locked only while the AEL/AFL button is pressed. BUTTON FUNCTION You can assign the following functions to each button: the Fn button, [ri] button and the & (preview) button. Button to assign Function Detail 11, © Fn | El | (preview) Press the button to set[@ FACE DETECT] to [ON] IFn FACE Press again to setitto [OFF] | v DETECT] ET "Using the face detection function’ (P. 38), “© FACE DETECT"(P. 109) While holding the button, you can use the preview IPREVIEW] function AR Ÿ ES "Preview function” (P. 46) Pressing the button automatically switches the ILIVE PREVIEW] | camera to live view for a preview ofthe picture on | | — Ÿ the monitor. Press the button to acquire the WEB value. à [SA] ES “Seting the autolpresetcustom white AR “ S 4 balance” (P. 67) 7 Press the button to switch to the registered AF home position. Press the button again to switch to the original AF target mode. you tum offthe camera | | / while is set to te AF home position, the original position wil| not be stored. ES "Registering an AF target mode” (P. 58) HOME]

Press the button to suitch AF mode to [MF]. Press È (MF the button again to switch to the original AF mode. | | Ÿ Ë Press the button to switch from JPEG to ä JPEG4RAW or from ] PEG4RAW to JPEG forthe $ |rawe: record mode ar / Ê You can change the record mode by tuning the dial û while holding doun the button Vou can swich he shooting mode by rating te Ë (P/AISIMI dial while holding down the button. TL " Pressing fe shuter butin ii pressing de BUEON nables you to check the picture you have justtaken [TEST PICTURE] | onthe moniorwthouthaving to record tne picture to | | v fhe card. This is useful when you want o see how à picture tumed out without saving it DNS [umiehoingteburen jrucanoicoeurecusen MERE the camera settings registered in (RESETMMYSET) | | v HARAS EF Setng MYSET” (P. 100) EN £ K&> ù

50033 e 00 0_unified.book Page 107 Sunday, December 5, 2010 2:59 PM Function Detail Button to assign

Fr [EI] (preview) You can switch the shooting mode to [er @) by

De Penn LT Underwater macro) Press and hold the button to retum to the previous Shooting mode. Press the bution to display the level gauge in the viewfinder and on the control panel, and press it ILEVEL GAUGE] | in to hide the level gauge display. TL Ÿ LS LEVEL GAUGE"(P. 110) MAGNY Press he buion do dsplay te subectenargedon | y | — ” de montor. TAF AREA You can selectthe AF target by rotatng te dial TT 7 SELECT] while holding down the button. You can setthe image stabilzer by rotating the dial HS MODE (LS. | while holding down the button. AR Y LS “image stabilizer” (P. 62) OFF] Does not allow function allocation. LA LA 2 valable to assign 68 FUNCTION: When selecting Cri], you can use the arrow pad to select the position of the AF target. You can perform this operation for several seconds after pressing the shutter button halfway and then releasing it. Q notes + During live view, the @ button operation is exclusive to the movie button regardless of the setting. — Cannot assign + The same function cannot be assigned to multiple buttons + The functions that cannot be assigned are not displayed on the function selection screen. BUTTON TIMER Lx sect button may remain selected even after it is released. Available only when the button is pressed. BSECUISSECMESECI The button remains selected during the number of seconds [HOLD] indicated. The button remains selected until you press it again. + Buttons that can be set with [BUTTON TIMER] 1S0, Œ-e WB, $, E2, 6, AF, i Ÿ/©, MODE You can switch the functions of the AEL/AFL button and the Fn button. When you select [ON], the AEL/AFL button will function as the Fn button, and the Fn button will function as the AEL/AFL button. + The setting also applies to the Fn button on the optional power battery holder when attached to the camera

É & 50033 e 00 0_unified.book Page 108 Sunday, December 5, 2010 2:59 PM

Normally, this camera does not release the shutter while the AF is operating or the flash is charging. If you want to release the shutter without waiting until these operations have complete, use the setting below. You can setthe release priority individually in AF mode. RLS PRIORITY S Sets release priority for S-AF mode EE P. 53 RLS PRIORITY C Sets release priority for C-AF mode Er P. 54. fps You can setthe number of pictures shot in one second when using sequential shooting with IŒiL] from [fps] to [fps]. Custom Menu » 6j DISP/m))/PC HDMI Setthis when the camera is connected to a TV via an HDMI mini-cable. HDMI OUT Selecting the digital video signal format for connecting to a TV via an HDMI mini-cable [O0 Playback in 1080i format 1720p] Play back in 720p format. [480p/576p] Play back in 480p/576p format (when [VIDEO OUT] is set to [PAL], play back in 576p format. @ notes + When set to [1080], 1080i format takes priority for HDMI output. However, if this setting does not match the input setting of the TV, the resolution is changed firstto 720p and then to 480p. For details on changing the input setting of the TV, refer to the TV instruction manual HDMI CONTROL When [ONT5s selected, the camera can be operated by a TV remote control when it is connected to the TV via an HDMI mini-cable. VIDEO OUT You can select NTSC or PAL according to your TV's video signal type. You will need to set this when you want to connectthe camera to a TV and play back images in a foreign country. Make sure the correct video signal type is selected before connecting the video cable. If you use the wrong video signal type, recorded pictures will not play back properiy on your TV. TV video signal types in major countries and regions Check the video signal type before connecting the camera to your TV. NTSC North America, | apan, Taiwan, Korea PAL European countries, China SLEEP The camera will enter sleep (standby) mode to reduce the drain on the battery if no operations are performed for the specified period. [OFF] cancels the sleep mode. Pressing a button such as the shutter button reactivates the camera

É & 50033 e_ 00 0_unified.book Page 109 Sunday, December 5, 2010 2:59 PM

During live view shooting, you can brighten the monitor for easier confirmation on the subject. LOFF] The subject is displayed on the monitor with the brighness level that is adjusted according to the exposure being set. You can shoot while confirming through the monitor in advance to get a picture that is to your liking. ION] The camera automatically adjusts the brightness level and displays the subject on the monitor for easier confirmation. The effect of the exposure compensation adjustments will not be reflected on the monitor. @ FACE DETECT When set to [ON], the camera will detect people's faces and automatically adjust the focus there. “Using the face detection function” (P. 38) You can play back close-up images focusing on the subjects face. [&“Single-frame/Close- up playback” (P. 86) EINFO SETTINGS Select the information displayed when the INFO button is pressed during live view or playback. ICINFO] Sets whether to display or hide [IMAGE ONLY], [OVERALLI, [Gi]. THIGHLIGHT&SHADOW] during playback. ES “Information display” (P. 89) ILV-INFO] Sets whether to display or hide [Gi], [HIGHLIGHT&SHADOW] [Z00M], IMULTI VIEW], IMAGE ONLY], [EB] [HA] [ER], or [O2] during live view. LS “Switching the information display” (P. 39) ISSETTINGS] Set whether t display or hide [E34/239/52251155100) ICALENDAR] during index display/calendar display. LE “index display/Calendar display” (P. 88) ÉICONTROL SETTINGS Set whether to display/hide the live control (E# P. 37) super control panel (E#P. 6) during live view HISTOGRAM SETTINGS Setthe brighiness range of the highlights (overexposed) and shadows (underexposed) to display waming on the Highlight&Shadow playback. BACKLIT LCD (Backlight timer) To save battery power, after the super control panel is displayed for a specified period of time, the monitor backlight darkens. Select from [8SEC1, [B0SEC], or [LMIN] for the time until the backlight get darker. [HOLD] sets the backlight not to get darker. The monitor backlightturns on again as soon as you touch any button (the shutter button, arrow pad, etc.)

You can tum offthe beep sound that is emitted when the focus locks by pressing the shutter button. VOLUME You can adjustthe speaker volume.

É & 50033 e 00 0_unified.book Page 110 Sunday, December 5, 2010 2:59 PM

USB MODE You can connectthe camera directiy to a computer or printer with the provided USB cable. If you specify the device you are connecting to beforehand, you can skip the USB connection setting procedure normally required every time you connect the cable to the camera. For details on how to connect the camera to either device, refer to “Connecting the camera to a printer” (ESP. 124) and ‘Using the OLYMPUS Viewer 2 /[ib]'(E#P. 127). IAUTO] The selection screen forthe USB connection will be displayed every time you connect the cable to a computer or printer. ISTORAGE] Allows you to transfer images to a computer. Also, select to use the OLYMPUS Viewer 2 / [ib] software via PC connection. Allows you to transfer images to a computer running Windows Vista without using the OLYMPUS Viewer 2 /[ib] sofware. [PRINT] Can be set when connecting the camera to a PictBridge-compatible printer. ICONTROL] Allows you to control the camera via the USB connection by using the Olympus Studio 2. LEVEL GAUGE This camera has an acceleration sensor that enables display of a bi-directional level gauge to detecttiting horizontally and in the forward and backward direction when [LEVEL GAUGE] is set to [ON]. Use this as a guide in situations where you cannot determine whether the camera is level, such as when you cannot see the horizon or skylne on the screen or when the screen is dark while shooting night scenes > Viewfinder and control panel indications: Press the shutter button halfway to display the level gauge in the viewfinder and on the control panel after a few seconds. Viewfinder Control panel | 9 Horizontal level indicator

“$_ Monitor indication: £ Press the INFO button repeatedly to display the level gauge. E& "Switching the information display” (P. 39) Displayed when outside the display range

É & 50033 e 00 0_unified.book Page 111 Sunday, December 5, 2010 2:59 PM

2 TIPS To calibrate the level gauge: » ES'LEVEL ADJ UST"(P. 120) To easily tu on and off the level gauge: » By registering [LEVEL GAUGE] to the Fn button, [si] button or Q@ (preview) button, you can press the that button to display or hide the level gauge. E& "BUTTON FUNCTION” (P. 106) Q notes + Ifthe camera is tilted forward or backward to à large degree, the error of the horizontal titling increases. 4h TIMER (Auto power off) You can setthe camera to turn off automatcall if not operated for 4 hours. lt wil notturn off ifthis is set to [OFF]

PICTURE MODE SETTINGS

When selecting the picture mode, you can skip the items that have notbeen set to [ON] Custom Menu » @ EXP. EV STEP You can selectthe EV step for exposure parameter setting, such as shutter speed, aperture value, or exposure compensation value, from [/3EV], [/2EV], or [LE VI

Selectthe metering method AELMetering You can setthe metering mode when pressing the AEL/AFL button to lock the exposure. + IAUTO] performs metering in the mode selected under [METERING] 150 STEP a You can selectthe EV step ofthe ISO sensitvity from [1/3E VI or [LE VI. ë ISO-AUTO SET Ê You can setthe upper limit and default ISO values when ISO is set to [AUTO] $ THIGH LIMIT] Ê This sets the upper limit ofthe ISO value that automatically changes. The upper limit à can be set from 200 to 6400 in 1/3 EV increments. IDEFAULT] This sets the value to be normally used when the optimum exposure can be obtained The value can be set from 200 to 6400 in 1/3 EV increments.

É & 50033 e 00 0_unified.book Page 112 Sunday, December 5, 2010 2:59 PM ds ù 2] 4 ISO-AUTO You can setthe shooting mode in which the ISO [AUTO] setting is activated IP/AIS] The [AUTO] setting is activated in all shooting modes except M and BULB mode. When [AUTO] is selected in M mode, ISO 200 is set. [ALL] The [AUTO] setting is activated for other than BULB mode. The ISO is automatically selected to obtain the optimal ISO even in M mode. BULB TIMER You can select the maximum time (in minutes) for bulb shooting, ANTISHOCK [+] You can selectthe interval between fully pressing the shutter button and releasing the shutter to be anywhere from 1/8 to 30 seconds. This diminishes camera shake caused by vibrations. This feature is useful in situations such as microscope photography and astrophotography. Q its Anti-shock is added to the shooting functions individually (single-frame shooting, sequential shooting, selftimer shooting and remote control shooting). E&F"Sequential shooting" (P. 59) Custom Menu » &3 # CUSTOM &X-SYNC. S | SA You can set the shutter speed that will be used when the flash fires. The speed can be set 7 from 1/60 to 1/250 in 1/3 EV increments. £SLOW LIMIT You can setthe slow limit of the shutter speed that will be used when the flash fires. The speed can be set from 30 to 1/250 in 1/3 EV increments. + When [AUTO] or [REDEYE] is set, the synchronous speed is limited to 1/30 second even when the slow limit is set to slower than 1/30 second. E2+4 When set to [ON], it will be added to the exposure compensation value and flash intensity control will be performed. eue nof Buzaumsn > [.

É & 50033 e 00 0_unified.book Page 113 Sunday, December 5, 2010 2:59 PM ds N Custom Menu » F3 :-/ASPECT/COLOR/WB NOISE REDUCT. (Noise Reduction) This function reduces the noise thatis generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tend to appear in images. With [NOISE RÉDUCT.], you can letthe camera reduce noise automatically to produce clearer images When setto [AUTO], noise reduction will be activated only when the shutter speed is slow. When setto [ON], noise reduction will always be activated. When setto When set to [OFF] IONJ or [AUTO] + While noise reduction is activated, ittakes about twice the usual time to take a picture. + The noise-reduction process is activated after shooting + During processing the card access lamp blinks. You cannottake more pictures until the card access lamp turns off. Q notes + During sequential shooting, [NOISE REDUCT.]is [OFF] automatically. + This function may not work effectively with some shooting conditions or subjects. NOISE FILTER æ& You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is > recommended during high sensitvity shooting (High ISO). ws LP. 66 Selectthe white balance to suit the light source. Other than custom white balance [CWB], adjust in the À direction (red - blue) and G direction (green - reddish purple) within the range E#71to [-7]. ALL ê You can apply the same compensation value to all the white balance modes at once. Ê IALL SET] The same compensation value applies to all WB modes. Ë IALLRESET] The WB compensation value settings applied to each WB mode are all à cleared at once. $ H you select [ALL SET] $

1) Use G® to select the color direction.

Toward A: Amber-Blue/Toward G: Green-Magenta

Releasing the AEL/AFL button takes à sample image. You can check the white balance you have adjusted H you select [ALL RESET] 1 Use @® to select IVES]

É & 50033 e 00 0_unified.book Page 114 Sunday, December 5, 2010 2:59 PM & ù 4 / COLOR SPACE You can select how colors are reproduced on the monitor or printer. The first character in image file names indicates the current color space. "FILE NAME” (P. 116) Pmdd0000.jpg ISRGB] Standardized color space for Windows. P:sRGB TAdobe RGB] Color space that can be set with Adobe Photoshop. Adobe RGB SHADING COMP. In some cases, the edges of the image may be shadowed due to the properties of the lens. The shading compensation function compensates by increasing brightness atthe dark edge of the image. This function is especially useful when a wide-angle lens is used. Q notes + This function is not available when à teleconverter or an extension tube is attached to the camera + Athigher ISO settings, noise in image edges may be conspicuous. SET You can combine 3 image sizes and 4 compression rates Register 4 different combinations and register 4 combinations. Selectthe registered setting ofimage setings. with Le: EF “Selecting the record mode” (P. 64)

É \Ÿ7_ 0033 e 00 0 unified.book Page 115 Sunday, December 5, 2010 2:59 PM

ASPECT SHOOTING When the aspect ratio for shooting is set to a setting other than [4:3], select whether the setting is effective only when taking pictures using live view, or anytime when taking pictures using the viewinder or live view. ILVI The setting is only effective when taking pictures using live view. TALL] The setting is effective when taking pictures using the viewfnder or live view. Q notes + When taking pictures using the viewfinder, images are not trimmed and are recorded with the aspect ratio information atthe time of shooting. During playback, images are displayed with à border based on the aspect ratio. + The aspect border is not displayed in the viewfinder. TT When taking pictures using the viewfinder, refer to the " diagram to the right. F6 F6 66, 6 Ge 16:9 Custom Menu » & RECORD/ERASE QUICK ERASE N You can erase the picture you have just taken immediately using the 1 button. 7 LOFF] When the @ button is pressed, the confirmation screen appears, asking you if you want to erase the picture ION] Pressing the Î} button erases the picture immediately.

You can selectthe method to erase images recorded in RAW+ PEG. This function can only be used to erase one frame. UPEG] Erases all] PEG image files, leaving only the RAW image files. IRAW] Erases all RAW image files, leaving only the | PEG image files. IRAWHPEG] Erases both image flle types Q notes + This function is effective only if deleting one frame. For all-frame erase or erasing selected frames, both RAW and JPEG will be erased regardless of this setting.

Ê & 50033 e 00 0_unified.book Page 116 Sunday, December 5, 2010 2:59 PM FILE NAME When you take a picture, the camera assigns it a unique file name and saves it in a folder. File names are assigned as shown in the illustration below. Foisr nan atces parte Folder number (100 - 999) File name Pmdd0000 |_—nmédponnies [T —— File number (0001 - 9909) fer taking 9909 pictures, ine counter is resat Day (01-31) to 0001 forthe next picture, the folder number increments by 1 to name and create a new folder where {ne next image (fl) is stored

Month (10, 11, 12 are Color space | numbered A, B, C) P:sRGB _ Adobe RGB IAUTO] Even when a new card is inserted, the folder numbers are retained from the previous card. Ifthe new card contains an image flle whose file number coincides with one saved on the previous card, the new card's file numbers start atthe number following the highest number on the previous card. IRESET] When a new card is inserted, folder numbers start at 100 and file numbers start at 0001. fa card containing images is inserted, the file numbers start at the number following the highest file number on the card EDIT FILENAME You can rename image files to make them easier to identify and organize. The portion of the filename that can be changed depends on the color space. "COLOR SPACE" (P. 114) SRGB : Pmdd0000.jpg AdobeRGB : _mdd0000.jpg You can change the character to OFF, À -Z or0-9 PRIORITY SET You can customize the initial position of the cursor ([YES] or [NO] on the Erasing images or Formatting the card screen. dpi SETTING You can set the resolution for printing images in advance. The set value is recorded on the card with the images. IAUTO] Automatically set according to the image size. [CUSTOM] You can make the desired setting. Press Ÿ to display the setting screen. CA/55 You can select which card to use when both a CompactFlash and SD Card are loaded

A A É 27 0033 e 00 0_unified.book Page 117 Sunday, December 5, 2010 2:59 PM 7 COPYRIGHT SETTINGS You can add the artist/copyright name that are set in advance to the image as Exif data For the artist name and the copyright name, you can enter up to 63 single-byte characters. + IFyou edit the image, the names of the artist and the copyright are taken over to the created file. However, in the case of "playback + multiple” and "image overlay", the information is not taken over but becomes blank. + We do nottake any responsibility for any troubles or damages resulting from the use of the copyright information. Use this function for your own risk [COPYRIGHT INFO] By setting to [ON], you can add the artisticopyrightname that are set in advance to the image as Exif data. Set to [OFF] not to add the registered name. [ARTIST NAME] Enter the artist name. [COPYRIGHT NAME] Enter the copyright name. Entering characters + Press @@Ë or tum the dial to select a character to enter from @ field, then press the © button + The selected character is displayed on the (D field. + Repeat this operation to enter whole name and select IEND] then press the © button. DE The entered item is confirmed. 134 + The cursor moves between (1) and @ by pressing the ER 1 INFO button. Le E NO +8 DELETE + [SET OK) Custom Menu » ÿ} MOVIE MOVIE ® LFP. 84 Choose [OFF] to record silent movies Custom Menu » &] & UTILITY hp | PIXEL MAPPING cP.15 à

EXPOSURE SHIFT Ê You can adjust the default value for optimal exposure for each metering mode according to È your preference. This can be setin 1/6 EV increments ranging from -1.0 EV to +1.0 EV. $ Q notes É + The exposure compensation can be set from -5.0 EV to +5.0 EV. Settng [EXPOSURE ni SHIFTJreduces the range of the direction in which the default value is adjusted. + You cannot check the exposure shif value during shooting. To make normal adjustments to the exposure, perform exposure compensation. L&F “Exposure compensation” (P. 47}

CLEANING MODE LT P.135

You can disable the white balance sensor used to determine the light source during auto white balance. This is useful when the light source near the sensor and the light source iluminating the subject are different.

É ®7S0083_e 00 0_unified.book Page 118 Sunday, December 5, 2010 2:59 PM NZ

AF FOCUS ADJ. You can use the AF sensor to fine-adjustthe focusing position to a range of 420 steps (-: closer, + toward 00). Normally, there is no need to change this

Fine-adjust the AF default value and register the setting. You can also register the setting according to the lens. OFF] AF focus adjustment is not performed. IDEFAULT DATA] Registers and applies all lens AF adjustment values not registered individually. sr283s ILENS DATA] : Fine-adjusts the AF for each lens. You 00000000 register the adjustment values for up to 20 lenses.

Use @@ to adjust Q notes + Depending on the adjustment made, the lens may not focus toward the oo or near side. + When using a teleconverter, the teleconverter and lens are registered as à set. + Only Four Thirds lenses can be registered. IDATA LIST] This displays the lens information registered with ILENS DATA] from [SET AF ù DATA]. Select a lens from the list, and then check, delete, or edit the registration information. DATA LIST When the same lens is registered multiple times, the adjustment value for the lens with 4 is DIENEEES applied

$ Select which lens to use ss when he same lens is rs Selectthis to check, delete, or edit registered multiple times ä the selected lens. $ orrs To take pictures while slightiy changing the AF adjustment value: > After fine-adjusting the adjustment value, press the shutter button and repeatedi take pictures before pressing the © button. Note the following when taking pictures to check the AF adjustment value. + Itis recommended that the record mode be set to a setting higher than [AN when taking cures. » Be careul of camera shake, subject movement, and changes in the distance to the subject when taking pictures. + Itis recommended that you take à picture of a subject with strong contrast within approximately 3 m (9.8 ft.) in the actual shooting environment (lighting and temperature). + Avoid taking pictures against backlight.

É W®7S0083_e 00 0_unified.book Page 119 Sunday, December 5, 2010 2:59 PM NZ To compare the difference in adjustment values: — You can use light box display to compare adjustment values. The adjustment values are also displayed during light box display. L “Light box display” (P. 87) To register to types of adjustment values (with the focal point of the lens in front of and behind the subject): — You can register multiple adjustment values for the same lens. Select the adjustment value to be applied during shooting with the [DATA LIST] screen To register two of the same type of lens individually: — You can individually register multiple numbers of the same type of lens. To specify and register AF targets, or to register the adjustment values for the wide and telephoto directions of the zoom: —> On the [LENS DATA SETJ screen, press À to make the following settings. + You can specify individual AF targets and adjust each AF target. Normally, the adjustment values for all AF targets are registered. + You can register different adjustment values for the wide and telephoto directions of the zoom Normal), the adjustment value for the telephoto direction is registered.

The characteristics of AA batteries may differ depending on the battery type and brand. When using the optional power battery holder (HLD-4) with AA batteries, you can set the battery voltage level of the battery check display according to the battery characteristics. Normally, there is no need to change this. [ami] This is the standard setting for battery characteristics of AA alkaline batteries. [m2] The waming level is set lower than that of [1] [as] The waming level is set lower than that of [2]. + To attach the power battery holder to the camera, remove the camera’s battery cover, as shown in the diagram to the right. D b |

+ Depending on the status of the batteries being used, this function may not work property + The number of pictures that can be taken increases in the order of [1] [2] [is]: however, no more pictures may be able to be taken without à warning display,

Ê & 50033 e 00 0_unified.book Page 120 Sunday, December 5, 2010 2:59 PM

2 WARNING LEVEL You can change the timing when @ is displayed (lights up). Normally, there is no need to change this Q notes + The battery check display is not a waming that the battery needs to be charged. When CA blinks, charge the battery. LS ‘Power on” (P. 13)

You can calibrate the level gauge if you feel thatthe gauge is not level. IRESET] Resets to the factory default adjustment value TADJ UST] Sets the current camera position as the zero point. Q notes + Set[ADJ UST] only when the camera is secured in à horizontal position. Ifthe camera is not in à stable position, you may not be able to calibrate the level gauge as desired. ere) inof Burzumsn> …

\Ÿ7 0033 e 00 0_unified.book Page 121 Sunday, December 5, 2010 2:59 PM 10 Printing Print reservation (DPOF) Print reservation Print reservation allows you to save printing data (the number of prints and the date/time information) with the pictures stored on the card Pictures set with print reservation can be printed using the following methods. DPOF (Digital Print Order Format) This is for saving desired print settings on digital cameras. By entering which images to print and the number of copies of each, the user can easily have the desired images printed by a printer or print lab that supports the DPOF format. Printing using a DPOF-compatible photo lab You can printthe pictures using the print reservation data Printing using a DPOF-compatible printer Pictures can be printed directiy from a dedicated printer without using a PC. For more details, refer to the printers manual. À PC card adapter may also be necessary Q notes + DPOF reservations set by another device cannot be changed by this camera. Make changes Using the original device. Moreover, setting new DPOF reservations using this camera will erase the previous reservations set by another device. + Not al functions may be available on all printers or at all photo labs. + RAW data are not printable. Single-frame reservation Follow the operation guide to set print reservation for a picture. 1 menu Operation guide — PAS 2 Select d press the © button. elect LL] and press the © button PRINT ORDER SETTING

É & 50033 e 00 0_unified.book Page 122 Sunday, December 5, 2010 2:59 PM

3 Press Q9 to select the frame that you want to set as print reservation, then press © @ to setthe number of prints. + To set printreservation for several pictures, repeat this step. 4 Press the © button when you have finished. + The menu screen for single-frame reservation appears. 5 select the date and time format and press the button. INOJ The pictures are printed without the date and time. IPATE] The pictures are printed with the shooting date. [TIME] The pictures are printed with the shooting time. 6 SelectiSET] and press the © button.

L 1 P PRINT ORDER SETTING

BACK*EES SET+OK) All-frame reservation Applies print reservation to all the pictures stored in the card. The number of prints is fixed at 1. MENU » [7] [0] Select [£#] and press the © button. Select the date and time format and press the © button. INO] The pictures are printed without the date and time. IDATE] The pictures are printed with the shooting date. TIME] The pictures are printed with the Shooting time. Select [SET] and press the © button.

d à \Ÿ7_ 0033 e 00 0 unified.book Page 123 Sunday, December 5, 2010 2:59 PM N 72 æ Resetting the print reservation data You can reset all print reservation data or just the data for selected pictures 1 menu Resetting the print reservation data for all pictures 2 select L] or [1%] and press the © button. Select IRESETI and press the © button.

CE] Resetting the print reservation data for a selected picture Select [D:] and press the © button. Select [KEEP] and press the © button. Use G9 to select the frame with print reservation data you want to reset, then press © to set the number of prints to 0. Press the © button when you have finished. Select the date and time format and press the © button. SJ Our BUN PS + This setting is applied to all frames with print reservation data. Fr > ST Select [SET] and press the © button. È Direct printing (PictBridge) By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print out recorded pictures directly. To find out if your printer is compatible with PictBridge, refer to the printer's manual. tBridge 0 The standard that enables digital cameras and printers made by different manufacturers to be connected, and also allows pictures to be printed directiy from the camera 3 STANDARD è A printers that support PictBridge have standard print settings. By selecting [STANDARD] à on the settings screens (EP. 125), you can print pictures according to these settings. For details on your printer's standard settings, refer to the printer's manual or contact the printer manufacture. + The available print modes and settings such as paper size vary with the type of printer. For details, refer to the printer's manual. + For details on printing paper types, ink cassettes, etc., refer to the printer's manual. Q notes + Use a fully charged battery.

• Images recorded in RAW data cannot be printed. + The camera will not enter sleep mode while it is connected to the USB cable. £ EN L 7 LA As FN

Ë + The picture selection screen appears when printing is a \Ÿ7_ 0033 e 00 0 unified.book Page 124 Sunday, December 5, 2010 2:59 PM Connecting the camera to a printer Use the provided USB cable to connect the camera to a PictBridge-compatible printer. 1 um the printer on and connectthe cameras USB terminal to the printers USB port with the USB cable. + For details on how to turn the printer on and the position ofthe USB port, refer to the printers manual. USB cable 2 Tum on the camera. + The selection screen for the USB connection is displayed. 3 use ©@ to select [PRINTI. + [ONE MOMENT] s displayed and the camera and printer are connected. Go to EP. 125. 2TIPS When cannot be connected — Refer to "USB MODE" (IP. 110) SET+OK) Easy printing L use 9 to display the pictures you want to print on the camera. + Display the image you want to printon the camera and pm connectthe camera with à printer using à USB cable. The screen on the right appears short. à 2 Press the (print) button. completed. To print another picture, use G@ to select the image and press the .O, button + To exit, unplug the USB cable from the camera while the picture selection screen is displayed. EASYPRINT START +}

A A É \Ÿ7_ 0033 e 00 0 unified.book Page 125 Sunday, December 5, 2010 2:59 PM 7 æ

Custom printing 1 rollow the operation guide to set a print option.

Selecting the print mode Selectthe type of printing (print mode). The available print modes are as shown below LALE ERA IPRINT] Prints selected pictures MULTI PRINT TALL PRINT] Prints allthe pictures stored in the ALL INDEX car end makes one print for each PRNEORDER [MULTI PRINT] Print multiple copies of one image in (REXUR Separate frames on a single sheet. IALL INDEX] Prints an index of all the pictures Follow the operation guide displayed stored in the card. here. [PRINT ORDER] Prints according to the print reservation you made. If there is no picture with print reservation, this is not available. (UP. 122) Setting the print paper items This setting varies with the type of printer. If only the printer STANDARD setting is available, you cannot change the setting. ISZE] Sets the paper size thatthe printer supports. PRINTPAPER IBORDERLESS]Selects whether the picture is printed on the entire page or inside à blank frame. SIZE BORDERLESS N - 7 BACK»ÿ SET+(OK]) IPICS/SHEET] Selects the number of pictures per sheet. Displayed when you have PRINTPAPER selected [MULTI PRINT]. PICS/SHEET Selecting pictures you want to print Select pictures you want t print, The selected pictures can be printed later (single-frame reservation) or the picture you are displaying can be printed right away. IPRINT] (OK) Prints the currently displayed Jul æ. picture. Ifthere is à picture that 11 ISINGLE PRINT] reservation has » é already been applied to, only that reserved picture will be printed. Ô ISINGLE PRINT] (Œ)) Applies print reservation to the > currently displayed picture. If you ’ want to apply reservation to other pictures after applying [SINGLE SELECT PRINT [OK] PRINT], use (JD to select them. SINGLEPRINT # MORE ET IMORE] (Œ)) Sets the number of prints and other items for the currently displayed picture, and whether or not to printit, For operation, refer to “Setting printing data” (ESP. 126) in the next section. 25 En £

50033 e 00 0_unified.book Page 126 Sunday, December 5, 2010 2:59 PM NS 4 Setting printing data Select whether to print printing data such as the date and time or file name on the picture when printing. When the print mode is set to [ALL PRINT] and [OPTION SETJ is selected, the following screen appears. LOx] Sets the number of prints: IDATE] Prints the date and time recorded on the picture. [FILE NAME] Prints the file name recorded on the picture. [ei] TTrims the picture for printing. Set the timming size with the main dial and the timming position with the arrow pad. BACK*imÿ ExE SET+OK) Once you have set the pictures for printing and printing data, select [PRINT], then press the © button. [PRINT] Transfers images you print to the printer. ICANCEL] Resets the settings. AÏ print reservation data will be lost. If you want to keep the print reservation data and make other settings, press the MENU button. This returns you to the previous setting. + To stop and cancel printing, press the © button. [CONTINUE] Continues printing. ICANCEL] Cancels printing. All print reservation data will be lost. SET+OK)

& 50033 e_ 00 0_unified.book Page 127 Sunday, December 5, 2010 2:59 PM ( Using the OLYMPUS Viewer 2 / [ib] Windows 1 insertthe supplied CD in a CD-ROM drive. Windows XP + À Setup” dialog wil be displayed. — . LES : on 0 Windows Vista/Windows 7 2 sa + An Autorun dialog will be displayed. Click ge “| “OLYMPUS Setup” to display the “Setup” dialog a Q notes cms | + Ifthe “Setup” dialog is not displayed, select'My Computer” {Windows XP) or “Computer (Windows VistaMWindous 7] from the start menu. Double-click Meme the CD-ROM (OLYMPUS Setplicnoopente “OLYMPUS Setup” window and then double-click “Launcherexe”. + [fa ‘User Account Control” dialog is displayed, click “Yes” or “Continue”. 2 Follow the on-screen instructions on your computer. Q notes + Ifnothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Use the battery fully charged. Look for this Terminal Smaller terminal Q notes + When you connect the camera to other device via USB, à screen to selectthe connection method is displayed. Set to [STORAGE] Register your Olympus product. + Click the “Registration” button and follow the onscreen instructions.

É \Ÿ7_ 0033 e 00 0 unified.book Page 128 Sunday, December 5, 2010 2:59 PM

E Mel fan / 2 A SNdWATO 21h BuIsN 4° install OLYMPUS Viewer 2 and [ib] computer software. + Check the system requirements before beginning installation + Clickthe “OLYMPUS Viewer 2” or "OLYMPUS ib” button and follow the on-screen instructions to install the software. OLYMPUS Viewer 2 Operating System Windows XP (Service Pack 2 or later) / Windows Vista / Windows 7 Processor Pentium 4 1.3GHz or better RAM 168 or more (2GB or more recommended) Free Hard Drive Space 16B or more Monitor Settings 1024 x 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) lib] Operating System Windows XP (Service Pack 2 or later) / Windows Vista / Windows 7 Processor Pentium 4 1.3GHz or better {Pentium D 3.0 GHz or better required for movies) RAM S12MB or more (1GB or more recommended) (1 GB or more required for movies. 2 GB or more recommended) Free Hard Drive Space 16B or more Monitor Settings 1024 x 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) Graphics À minimum of 64 MB video RAM with DirectX 9 or later. Macintosh + *See online help for information on using the software. "Setup" dialog. 1 insertthe supplied CD in a CD-ROM drive. + When you insertthe CD-ROM to Mac, the drive contentis automatically displayed by the Finder. When it does not open automatically, double- click the icon on the desktop. + Double-click the “Setup” icon to display the setup 2 install OLYMPUS Viewer 2. + Check the system requirements before beginning installation. + Click the “OLYMPUS Viewer 2” button and follow the on-screen instructions to install the software.

É \Ÿ7_ 0033 e 00 0 unified.book Page 129 Sunday, December 5, 2010 2:59 PM

OLYMPUS Viewer 2 Operating System Mac OS X v10.4.11.v10.6 Processor Intel Core Solo/Duo 1.5 GHz or better RAM 1GB or more (2GB or more recommended) Free Hard Drive Space 1GB or more 1024 x 768 pixels or more Minimum 32,000 colors (16,770,000 DL Sins colors recommended) *Other languages can be selected from the language combo box. For information on using the software, see online help. Import and store the image without OLYMPUS Viewer 2 or [ib] Your camera supports the USB Mass Storage Class.You can transfer images to a computer by connecting the camera to the computer with the provided USB cable. The following operating systems are compatible with the USB connection: Windows :Windows 2000 Professional Windows XP Home Edition{Windows XP Professional} Windows VistañWindous 7 Macintosh :Mac OS X v10.3 or later 1 ru the camera off and connect itto the computer. + The location of the USB port varies with the \ computer.For details, refer to your computer‘s manual. ba 2 Turn on the camera. + The selection screen for the USB connection is displayed. 3 press © to select ISTORAGE]. Press the © button. 4 The computer recognizes the camera as a new device. Q notes + If your computer is running Windows Vista, select [MTP ] in Step 3 to use Windows Photo Gallery, + Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port. + Computers with à USB port added by means of an extension card, etc. + Computers without a factory-installed OS and home-built computers + When the camera is connected to the computer, none of the camera buttons are functional.

ES \Ÿ7_ 0033 e 00 0_unified.book Page 130 Sunday, December 5, 2010 2:59 PM 171 Shooting tips and maintenance

Shooting tips and informa The camera does not turn on even when a battery is loaded The battery is not fully charged + Charge the battery with the charger. The battery is temporarily unable to function because of the cold + Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the camera. Remove the battery and warm it by putting it in your pocket for a while. No picture is taken when the shutter button is pressed The camera has turned off automatically + To save battery power, if there is no operation, the camera goes into sleep mode after a fixed period of time and the camera stops operating. The camera activates again when you touch the Shutter button or any other button. The camera wil turn off automatically if there is no further operation for 4 hours. The camera will not work until it is turned back on. L&"SLEEP"(P. 108), "4 h TIMER (Auto power off)” (P. 111) The flash is charging + When the flash is activated and the & symbol in the viewfinder is blinking, this indicates that the flash is charging. Waït for the blinking to stop, then press the shutter button. Unable to focus + When the AF confirmation mark in the viewfinder is blinking, it indicates that the camera is unable to focus using AF. Press the shutter button again. Noise reduction is activated + When shooting night scenes, shutter speeds are slower and noise tends to appear in images. The camera activates the noise-reduction process after shooting at slow shutter speeds. During which, shooting is not allowed. You can set [NOISE REDUCT.]to [OFF]. Lx "Noise reduction” (P. 72) The date and time has not been set The camera is used with the settings at the time of purchase + The date and time ofthe camera is not set when purchased. Set the date and time before using the camera. EF “Setting the date/time” (P. 14) The battery has been removed from the camera + The date and time settings will be retumed to the factory default settings ifthe camera is left without the battery for approximately 1 day. The settings will be canceled more quickly ifthe battery was only loaded in the camera for a short time before being removed. Before taking important pictures, check that the date and time settings are correct.

L. & 50033 e 00 0_unified.book Page 131 Sunday, December 5, 2010 2:59 PM ds N Subjects that are difficult to focus on Itmay be difficult to focus with auto focus in the following situations AF confirmation mark is blinking. TF} Nb ë These subjects arenot | ÿ EEE focused. a 2 Cr Ne 1 Subject with low contrast Excessively bright light Subject with in center of frame repeated pattems AF confirmation mark lights up butthe subject is notfocused. Subjects atdiferent … Fastmoving subject Subject not inside distances AF area In any situation, focus on something with high contrast thatis atthe same distance as the subject, determine the composition and shoot the picture. Image taken appears whitish This may occur when the picture is taken in backlight or semi-backlight conditions. This is due to à phenomenon called flare or ghosting. As far as possible, consider a composition where strong light source is nottaken in the picture. Flare may occur even when à light source is not present in the picture. Use a lens hood to shade the lens from the light source If a lens hood does not have effect, use your hand to shade the lens from the light. ES “interchangeable lenses” (P. 138) S | 4 Unknown bright dot(s) appear on the subject in the picture taken 7 This may be due to stuck pixel (s) on the image pickup device. Perform [PIXEL MAPPING]. If the problem persists, repeat pixel mapping a few times. LS “Pixel mapping — Checking the image processing functions” (P. 135) Ê Functions that cannot be selected from menus $ Some items may not be selectable from the menus when using the arrow pad. È + Items that cannot be set with the current shooting mode + Items that cannot be set because of an item that has already been set: È Combination of [=] and [NOISE REDUCT.], etc. When the focus cannot be obtained with imager AF When using à lens other than high-speed Imager AF-compatible, it may be difficult to focus © depending on the subjectS etting [PD AFL] to [ON] in the Custom Menu allows to use the phase difference AF during live view by pressing AFL/AEL button D “PD AFL" (P. 103) Forthe information about the high-speed Imager AF-compatible lens, visitthe Olympus website. Camera vibration when the power is tumed off This is due to the camera initializing the image stabilizer mechanism. Without this initalization, the image stabilizer may not be able to achieve the proper effect. EN £

PS A \Ÿ7_ 0033 e 00 0 unified.book Page 132 Sunday, December 5, 2010 2:59 PM N 72 æ A & 7 ® Error codes Control Viewfinder Monitor panel Possible cause Corrective action indications | , fon | indication The card is not Normal inserted, or it Insert a card or insert à indication | = -- cannot be different card NO CARD | recognized Insert the card again. If the problem persists, ta €) -E pers arablem | formatthe card. Iftne card CARD ERROR : cannot be formatted, it cannot be used The card has been setto read-only setting with the computer. a | 0 Wing to te card | Re Me Et d -P- WRITE is prohibited. The SD card write protect PROTECT switch is on the LOCK side. Return the switch to enable writing The cards full. No As Deer CAN | Replace the card or erase As 4 unwanted pictures. S 4 pla 5 HH caD lux FR Rome Before erasing, download Fan abonean be | iMPOrtant images to à PC. recorded ë There is no space $ inthe card and | Replace the card or erase print reservation _ | unwanted pictures. g | No indication | No indication ornew images | Before erasing, download è CARD FULL | cannot be important images to à PC. È recorded. È + Select [CLEAN CARD], press the @ button and È tum off the camera $ Remove the card and wipe dry the metallic 12 SD Cards cannot | surface with a soft dry No indication | No indication bereadorisnot | cloth formatted + Select [FORMAT] » IVESI, and then press the © button to format the card. Formattng the card erases all data on the card. There are no Mir contains no No indication | No indication pictures onthe | Record pictures and play 1 NO PICTURE | card back. 7 Eu À NA LA

É \Ÿ7_ 0033 e 00 0 unified.book Page 133 Sunday, December 5, 2010 2:59 PM Control Viewfinder Monitor panel Possible cause Corrective action indications | ons | indication The selected picture cannot be displayed for Use image processing playback due to à | software to view the No indication | No indication problem with this _ | picture on a PC. PICTURE picture. Orthe Ifthat cannot be done, the ERROR picture cannotbe | image file is damaged. used for playback on this camera Pictures taken with another Use image processing No indication | No indication | THETMAGE | camera cannotbe | software to editthe CANNOT BE | edited on this picture EDITED |camera. Extended use of le view or Wait a moment for the Internal camera | sequential camera to turn off temperature is | Shooting has automatically. Allow the No indication | No indication | se | increased the internal temperature of the wait for cooling | intemal camera to cool before before camera | temperature ofthe | resuming operations. Use. camera. CD lrebateyis No indication | No indication | gaTTERY |uained. Charge the battery. EMPTY Ch pe cameras Mt | Disconnectthe camera No indication | No indication and connect it again NO computer or correctiy. CONNECTION | printer correct. No indication | No indication: + There is no paper | Load some paper in the = in the printer. printer. NO PAPER The printerhas | Replace the ink cartridge No indication | No indication run dutof ink. in the printer. NOTINK The paper is Remove the jammed No indication | No indication A, Hans Fur JAMMED epueuaqureu pue sdp Supooys

A A \Ÿ7 0033 e 00 0 unified.book Page 134 Sunday, December 5, 2010 2:59 PM NA æ ds 4 SA 7 Control Viewfinder Monitor panel Possible cause Corrective action indications | ; Ééatons | indication The printers paper cassette has been removed SETTINGS |orthe printer has CHANGED | been manipulated while making settings on the camera Do not manipulate the printer while making settings on the camera. No indication | No indication Turn off camera and There is à problem | printer. Check the printer No indication | No indication with the printer | and remedy any problems and/or camera. | before tuming the power PRINT ERROR on again: Pictures recorded on other cameras | Use a personal computer may notbe printed | to print. CANNOT PRINT | on this camera. Camera maintenance Cleaning and storing the camera No indication | No indication

& Cleaning the camera > Tum offthe camera and remove the battery before cleaning the camera 2 Exterior: È + Wipe gently with a soft cloth. Ifthe camera is very dirty, soak the cloth in mild soapy water and

• wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used ê the camera at the beach, use a cloth soaked in clean water and well wrung. À Monitor and viewfinder: # * Wipe gently with a soft cloth À Lens, mirror and focusing screen: È + Blow dust off the lens, mirror and focusing screen with à commercially available blower. For the . lens, wipe gently with a lens cleaning paper. El Storage À + When notusing the camera for a prolonged period, remove the battery and card. Store the $ camersin a coo!, dry place tatis well ventilated + Insertthe battery periodically and testthe cameras functions. Cleaning and checking the image pickup device This camera incorporates a dust reduction function to keep dust from getting on the image pickup device and to remove any dust or dirt from the image pickup device surface with ultrasonic vibrations. Dust reduction is activated when the power switch is setto ON and when starting and stopping live view. The dust reduction function operates at the same time as the pixel mapping, which checks the image pickup device and image processing circuitry. Since dust reduction is activated every time the camera's power is tumed on, the camera should be held upright for the dust reduction function to be effective B EN ) 7 LA

À PS É ®7S0083_e 00 0_unified.book Page 135 Sunday, December 5, 2010 2:59 PM NZ æ

Q notes + Do not use strong solvents such as benzene or alcohol, or à chemically treated cloth. + Avoid storing the camera in places where chemicals are treated, in order to protect the camera from corrosion. + Mold may form on the lens surface if the lens is left dirty. + Check each part of the camera before use if it has not been used for à long time. Before taking important pictures, be sure to take a test shot and check that the camera works properiy. Cleaning mode — Removing dust If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact your Olympus Authorized Service Center to have the image pickup device physically cleaned. The image pickup device is à precision device and is easily damaged. When cleaning the image pickup device yourself, be sure to follow the instructions below. f power runs out during cleaning, the shutter wil close, which may cause the shutter curtain and mirror to break. Keep an eye on the remaining battery power. L_ Remove the lens from the camera, and setthe power switch to ON. (PDEL MAPPING

2 MENU» [,1» [E]» ICLEANING MODE] EROSMESEN

3 press @, then press the © button. + The camera enters the cleaning mode. 2, lEXTMB DETECT | ON 4 Press the shutter button all the way. /AF FOCUS AD) . + The mirror goes up and the shutter curtain opens. JAABATTERY TYPE) am: 5 ciean the image pickup device. Back. SE OR + Carefully blow off any dust on the surface of the image < à pickup device by using a mechanical blower (commercially available). 6 Be careful notto catch the mechanical blower in the shutter curtain when tuming the power off to finish cleaning. + Ifthe camera turns off, the shutter curtain closes, causing the mirror to fall. Q notes + Be careful not to letthe mechanical blower (commercially available) touch the image pickup device. Ifthe blower touches the image pickup device, the image pickup device will be damaged. + Never put the mechanical blower behind the lens mount. Ifthe power turns off, the shutter closes, breaking the shutter curtain: + Do not use anything other than the mechanical blower. fhigh-pressure gas is sprayed onto the image pickup device, it will freeze on the image pickup devices surface, damaging the image pickup device. Pixel mapping — Checking the image processing functions The pixel mapping feature allows the camera to check and adjustthe image pickup device and image processing functions. After using the monitor or taking continuous shots, wait for at least one minute before using the pixel mapping function to ensure that it operates correct.

L MENU» 18.1» [> [PIXEL MAPPING]

Press f), then press the © button. + The [BUSY] bar is displayed when pixel mapping is in progress. When pixel mapping is finished, the menu is restored. Q notes + Ifyou accidentally tu the camera off during pixel mapping, start again from Step 1. B5 EN £ K&>

d d \Ÿ7_ 0033 e 00 0_unified.book Page 136 Sunday, December 5, 2010 2:59 PM N 22 æ 1<] Information Card basics Usable cards “Card” in this manual refers to a recording medium. This camera can use CompactFlash or SD Card, SDHC card and the SDXC card (commercially available) CompactFlash SD card (Type 1) (UDMA-compatible) An SD card is à recording medium which are A CompactFlash is a large-capacity solid state frequently used in compact cameras as well flash memory card. You can use commercially available cards. SD card write protect switch The SD card body has a write protect switch. If you setthe switch to the "LOCK" side, you will not be able to write to the card, delete data or format. Return the switch to enable writing. Q notes + The data in the card will notbe erased completely even after formatting > the card or deleting the data. When discarding, destroy the card to 2 prevent leakage of personal information.

Formatting the card Cards fommatted on a computer must be formatted with the camera before they can be used Al data stored on the card, including protected images, is erased when the card is formatted When formatting a used card, confirm there are no images that you stil want to keep on the card. L menu» 1j» [CARD SETUP] 2 use © to select FORMAT], then press the © button. 3 use © to select[YES] then press the © button. TERRE + Formatting is performed. CARD SETUP TIPS When inserting cards into the two card sl BACKPES SET+OK) » Selectthe card to be used in [CFD]. 15 P.116) L EN > LA 7 A An

& 50033 e 00 0_unified.book Page 137 Sunday, December 5, 2010 2:59 PM Battery and charg, © Use the single Olympus lithium-ion battery (BLM-5). Do not use other than Olympus genuine battery. The BLM-1 can be used, however be sure to use the dedicated charger {BCM-1 or BCM-2) when charging it. We recommend using BLM-5 © The camera's power consumption varies widely with usage and other conditions. © As the following consume à lot of power even without shooting, the battery will be drained quickly. + Performing auto focus repeatedly by pressing the shutter button halfway in shooting mode + Using live view + Displaying images on the LCD monitor for a prolonged period. + When connected to a computer or printer. © When using a drained battery, the camera may turn off without the low battery warning being displayed © The battery will not be fully charged atthe time of purchase. Charge the battery using the provided charger (BCM-5) before use © The normal charging time using the provided charger is approximately 3.5 hours (estimated). © When charging the provided battery, never use the charger other than the dedicated one. Also do not use the provided charger for any battery other than the dedicated one. Using your charger abroad «The charger can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differentiy and the charger may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. © Do notuse commercially available travel adaptors as the charger may malfunction.

É \Ÿ7_ 50033 e 00 0 unified.book Page 138 Sunday, December 5, 2010 2:59 PM Interchangeable lenses Select the lens that you want to shoot with. Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used, auto focus and light metering will not function correcty. In some cases, other functions may not work either. + The Micro Four Thirds lens cannot be used FOUR THIRDS mount Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new interchangeable lenses featuring the Four Thirds mount were developed from the ground up based on optc engineering exclusively for digital cameras; ZUIKO DIGITAL interchangeable lens Four Thirds system interchangeable lens are designed to withstand rigorous professional use. The Four Thirds system makes it possible for a fastlens to be compact and lightweight as well Focal ngth and depth of field of Four Thirds system lenses When compared to 35-mm cameras, Four Thirds system cameras achieve different effects at the same focal length and aperture. Focal length Atthe same focal length of a 35-mm camera, a Four Thirds system camera can achieve a focal length equivalent to twice that of a 35-mm camera. This enables the design of compact telephoto lenses. À 14-50 mm Four Thirds system lens, for example, is equivalent to à 28- 100 mm lens for a 35-mm camera + When the image angle of Four Thirds system lens is converted to that of a 35-mm camera, the perspective is the same as that of à 35-mm camera Depth of Field A Four Thirds system camera can achieve a depth of field equivalent to two times deeper than thatof a 35-mm camera. À Four Thirds system lens with f2.0 brightness, for example, is equivalent to f4.0 when converted to the aperture of a 35-mm camera. + You can achieve the same amount of background blur as if you were using a 35-mm camera Q notes + When you attach or remove the body cap and lens from the camera, keep the lens mount on the camera pointed downward, This helps prevent dust and other foreign matter from getting inside the camera. + Do not remove the body cap or attach the lens in dusty places: + Do not point the lens attached to the camera toward the sun. This may cause the camera to malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens. + Be careful not to lose the body cap and rear cap. + Attach the body cap to the camera to prevent dust from getting inside when no lens is attached

a \Ÿ7_ 0033 e 00 0 unified.book Page 140 Sunday, December 5, 2010 2:59 PM Can be used with the optional EX-25 extension tube under the following conditions. The focus adjustment when EX-25 is used will be MF x nification Lens, focal length Shooting range | {_}: calculated based on 35 mm film camera Shogüng is not possible since subjects cannot be brought into focus attis 14-54 mm | 14mM | cal length, F28351 54 mm 17.7 cm 22.2 cm 047-065 (0.94 13%) ED 12-60mm | 12 mm | SMO0HN is not possible since subjects cannot be brought into focus at this F28-40 focal length swD 60 mm Zicm-256cm | D43-058x(0.86- 116%) M Storage Precautions + Clean the lens after use. Remove dust and dirt on the surface ofthe lens with a blower brush or brush. Use commercially available lens cleaning paper to remove the dirt on the lens. Do notuse organic solvents + Always cap the lens and store it when itis not used + Do not store in an area with insect repellent. © notes on Shooting + Edges of pictures may be cut off if more than one filter is used or if a thick filter is used. Program line diagram (P mode) In the P mode, the camera is programmed such thatthe aperture value and shutter speed are automatically selected according to the subjects brighiness as shown below. The program line diagram varies with the type of lens mounted. — Men using tre DCR RSR OR ON ON RON ONURON ON ON IN 2 (4-54 mmP28-35 |

æ | À a dl \Ÿ7 s0033_e 00 0 _unified.book Page 141 Sunday, December 5, 2010 2:59 PM 72 æ Shooting mode Flash timing Fred timing when flash P 17 (lens focal length x 2) à arsynchronization timing, 160 whichever is slower 1250 The set shutter speed _ M pi “1 Can be changed using menu: 1/60 - 1/250 1 "#X-SYNC."(P. 112) *2 Can be changed using menu: 30 - 1/250 1& “#SLOW LIMIT” (P. 112) Exposure warning display Ifthe optimum exposure cannot be obtained when pressing the shutter button halfway, the display wil blink in the viewfinder and on the super control panel Status Action Shooting | Waming display mode _| _ example (blinking) The subjectis 100 dark. + Increase the 150 sensiivity + Use the flash The subjectis t00 bright. + Decrease the ISO sensiivity. Use à commercially available ND filter (for adjusting the amount of light.

\Iy The subjectis underexposured. | + Decrease the aperture value. 2 Increase te 150 sensiviy -60"F55 The subjectis overexposured. | + Increase the aperture value. NL ly + Decrease the ISO sensitivity or — 2000755 use a commercially available TIN ND filter (for adjusting the amount of light. i The subjectis underexposured. | + Setthe shutter speed slower. \ sd + Increase the ISO sensitivity. “oo F2 - LIN The subjectis overexposured. | + Setthe shutter speed faster. Decrease the ISO sensivity or \l $ oos F2? - use a commercially available AN ND flter (for adjusting the amount of ight). + The aperture value atthe moment when its indication blinks varies with the lens type and focal length of the lens:

à PS \Ÿ7_ 0033 e 00 0 unified.book Page 142 Sunday, December 5, 2010 2:59 PM N 72 æ a rs SA @ Flash modes that can be set by shootin de Super Conditions Shooting] Viewfinder | Controlpanel | control | eh node | Flesh |éorfring | Shutter mode | _ indications ications. panel timing 9 |speed limit| indications Ci 5-5 Auto flash Fires AUTO utometcaly |; 30 sec. . Le uote man [Hsosec

50 - (red-eye _ |1stcurtain

L 8 & reduction) conditions Always | 30sec.- % % # | Fiinfash fes |1/250sec EU gofr © | Fashot | — = = Slow L so ® | © |sncronizaton p |5$tc00.g) 4x sLow |” (eceye A reduction) [1steurtain| Fires ; mn Le Le para &æ | 450.9 Les sw |snchronizaton net (st curain) ae Slow LE # …. [synchronization[2nd curtain k sLow2 eurain) 60 sec. - PS & 17250 sec. Sa ii Manual flash st] lun un & | Manuaifash sis 14 (4) Aleys 1steurain| À} 1-6 4 Manual flash îres % " 1716 (716) ie 1. 4 | Manualfiash BU 4 FE LE lame #1 When the flash is setto the Super FP mode, itdetects backlight with longer duration than for normal fiash before emiting light. F& "Super FP flash” (P. 79) Ps EN ) 7 LA

\Ÿ7_ 0033 e 00 0 unified.book Page 143 Sunday, December 5, 2010 2:59 PM Super j Conditions Shooting Control panel | control Flash Shutter mode ations | panel | Fleshmode | going | forfiing | pecd jimit indications CLS p E ETT Always | 60 sec. Fil flash | 15t curtain 400 ,e ©: |‘ fes |1/250 sec. reduction) 5 oFF PE © rush | — — — Fin fes s 2nd Slow 42 % 2nd-CURTAN | cURTAIN |syncronization [279 cui] M {nd curain) 8 FL port | # [ramaitesn œure)) % Ut | $ Pubs | eu | (uit a 5 iways | 60 sec. - n 1 Manual flash fires | 1/250 sec.

e ist eur nr Eh Manual flash UE Us EE) ii lune Le "a + Manual fiash gt 4e FEAT dE [uen White balance col perature The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish. The spectral balance of different white light sources is rated numerically by color temperature - concept of physics expressed using the Kelvin (K) temperature scale. The color of sunlight and 2000 so00 4000 50006000 #aaptk] è Ê à 5 Î è A other natural light sources and the color of a light bulb and other artificial light sources can be expressed in terms of color temperature. Itfollows, then, thatthe color temperatures of fluorescent lights make them unsuitable as artificial light sources. There are gaps in the hues from the color temperatures of fluorescent light. Ifthese differences in hue are small they this is called correlated color temperature The 4000K preset setting in this camera are correlated color temperatures, and should not be considered strictiy as color temperatures. Use these setings for shooting conditions under fluorescent lights The color temperatures for each light source indicated in the above scale are approximate. can be calculated with color temperature and

PÈTURE ‘ AELIAFL MEMO ‘

MF ASSIST 7 WARNING LEVEL =

ISO STEP 7 EDIT FILENANE =

\Ÿ7_ 0033 e_00 0 unified.book Page 146 Sunday, December 5, 2010 2:59 PM

ITONE STILL [RAWAFAN NAN RAWTNRANT | p 64

É \Ÿ7_ 0033 e 00 0 unified.book Page 147 Sunday, December 5, 2010 2:59 PM A ù 4 J Function Setting Ref. page

SEL. IMAGE _[RAW DATA EDIT

[SHADOW ADJ/REDEYE FIX/

LEHASPECTIBLACK & WHITE PPEG EDIT KeplSATURATIONEme- | P.93

EDIT (SEL. IMAGE PORTRAIT

INO® START/ ù MES IMAGE IMAGES MERGE"AIMAGES MERGE/ | p.95

OVERLAY (‘IMAGES MERGE

\Ÿ7_ 0033 e 00 0 unified.book Page 148 Sunday, December 5, 2010 2:59 PM

Custom Menu Tab | Function Setting Ref. page | M APM p.102 [AP AREA ET L * M p.10?

PDO AFL OFFHON P.103

É \Ÿ7_ 0033 e 00 0 unified.book Page 149 Sunday, December 5, 2010 2:59 PM & à Tab Function Setting Ref. page

DISPLAYED GRID(OFF/EB/E8/E/

JZOOMMULTI VIEWIMAGE ONLY

ésconraou. LIVE CONTROL LEO 0 ISÉTTINGS ONTR \oFr+on + Factory defaul setting “Settings differ depending on the region where the camera is purchased.

A À \Ÿ7_ 0033 e 00 0 unified.book Page 150 Sunday, December 5, 2010 2:59 PM SA æ 7 PS LA LA Tab Function Setting Ref. page

Y HISTOGRAN SETTINGS [HIGHLIGHT/SHADOW P.109

# JBACKLIT LCD ESECH30 SECA MINHOLD P-109

A À \Ÿ7_ 0033 e 00 0 unified.book Page 151 Sunday, December 5, 2010 2:59 PM SA æ L & @ SA Tab | Function I Setting Ref. page

A5 PS \Ÿ7_ 0033 e 00 0 unified.book Page 152 Sunday, December 5, 2010 2:59 PM NS 4 æ 7 & LA ® Tab | Function I Setting Ref. page & | our P.u7 # PIXEL MAPPING = Pu7 EXPOSURE SHIFT |@) 11-010 #1 p.117 (e] CLEANING MODE = Pu7 EXT. WB DETECT, OFF/ON" Pur

• Factory default setting “Settings differ depending on the region where the camera is purchased

À PS É W®7S0083_e 00 0_unified.book Page 153 Sunday, December 5, 2010 2:59 PM NZ æ

= Product type Product type : Single-lens reflex digital camera with interchangeable lens system Lens : Zuiko Digital, Four Thirds System Lens Lens mount Four Thirds mount Equivalent focal length on à 35 mm film camera Approx. twice the focal length of the lens M Image pickup device Product type 4/3" Live MOS sensor No. of total pixels Approx. 13,100,000 pixels No. of effective pixels Approx. 12,300,000 pixels Screen size 17.3 mm (H) x 13.0 mm (V) (0.7" x 0.5") Aspect ratio 1.33 (4:3) = Viewfinder Product type Eye-level single-lens reflex viewfinder Field of view Approx. 100% (for field of view on recorded images) Viewfinder magnification Approx. 1.15% (-1 m1, 50 mm lens, infinity) Eye point : Approx. 20mm from cover glass (1.0") (-1 m°1} Diopter adjustment range _ : -3.0 - +1.0 m Optical path fraction Quick return half mirror Depth of field Can be checked with the preview button Focusing screen Fixed (Can be exchanged with FS-3 (available separately) at Olympus service station) N Eyecup Interchangeable SF # Live view : Uses Live MOS sensor for shooting : Field of view of 100% M LCD monitor (Movable) Product type : 3" TFT color LCD Total no. of pixels Approx. 920,000 dots = Shutter Product type Computerized focal-plane shutter Shutter 1/8000 - 60 sec., Bulb shooting = Auto focus Product type TTL phase-contrast detection system/Imager contrast detection system Focusing points 11 points AF luminance range EV-2-EV 19 (ISO 100 equivalent, at room temperature 20 °C {68 °F), TTL phase-contrast detection system) Selection of focusing point : Auto, Optional AF illuminator The built-in flash provides light. EN £

Ed \Ÿ7_ 0033 e 00 0 unified.book Page 154 Sunday, December 5, 2010 2:59 PM

= Exposure control Metering system TTL ful-aperture metering system {1) Digital ESP metering {2) Center weighted averaging metering (3) Spot metering (approx. 2% for the viewfinder screen) Metering range EV 1-20 (Digital ESP metering, Center weighted average metering, Spot metering) [At room temperature, 50 mm ?2, ISO 100) Shooting modes ()P : Program AE (Program shift can be performed) () A: Aperture priority ÂE (3)S : Shutter priority A @)M : Manual (5)B :BU8 150 sensitivity 100 - 6400 (1/3, 1 EV step) Exposure compensation: 25 EV (1/3, 1/2, 1 EV step) = White balance Product type Image pickup device and white balance sensor Mode setting Auto, Preset WB, Customized WB, One-touch \WB = Recording Memory CF card (Compatible with Type 1) (UDMA-compatible) SD Card/SDHC Card/SDXC Card Recording system Digital recording, | PEG (in accordance with Design rule for Camera File system (DCF)), RAW Data Applicable standards Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching ll, PictBridge = Playback Playback mode Single-frame playback, Close-up playback, Index display, Image rotation, Slideshow, Light box display, Calendar display Information display Information display, Histogram display = Drive Drive mode Single-frame shooting, Sequential shooting, Self-timer, Remote control Sequential shooting Approx. 5 frames/sec. Selftimer Operation time: 12 sec., 2 sec. Optical remote control Operation time: 2 sec., 0 sec. (instantaneous shooting) {RM-1 Remote Control (optional}) = Flash Synchronization Synchronized with the camera at 1/250 sec. or less: Flash control mode TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL External flash attachment __: Hot shoe, Extemal flash connector (x attachment) Wireless flash function Compatible with the Olympus wireless RC flash system = External connector Microphone connector/HDMI mini connector (Type C)/ USB terminal/ AV OÙT connector/ Remote cable connector/ External flash connector (x attachment) = Power supply Battery Lision Battery (BLM-5) x1

m Dimensions/weight Dimensions 142.5 mm (W) x 116.5 mm (H) x 74.5 mm (D) (5.6" x 4.6" x 2.9") {excluding protrusions) Weight Approx. 892 g (2.0 Ib.) {including battery/CF card) = Operating environment Temperature 0 °C - 40 <C (32 °F - 104 °F) (operation)! -20*C - 60 “C (-4 °F - 140 °F) (storage) Humidity 30 - 90% (operation}/10 - 90% (storage) HDMI, the HDMI logo and High-Definition mu Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

HIGH-DEFINITION MULTIMEDIA INTERFACE

Battery/charger specifications BLM-5 Lithium ion battery

Product type Rechargeable Lithium ion battery Nominal voltage DC7AV Nominal capacity 1620 mAh No. of charge and discharge times Approx. 500 times (varies with usage conditions) Ambient temperature 0 °C - 40 °C (32 °F - 104 °F) (charging) -20 °C -35 *C (-4 °F - 95 *F) (storage) & BCM:5 Lithium ion charger

Rated input 100 to 240 V AC (50/60 Hz) Rated output DC 8.4 V, 600 mA Charging time Approx. 3.5 hours (room temperature if using BLM-5) Ambient temperature 20°C - 40 °C (32 °F - 104 °F) (operation)/ -20 *C - 60 “C (-4 °F - 140 °F) (storage)

• The provided AC cable is dedicated to this product. Do not use with other devices. Do not use cables of other products for this product. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE MANUFACTURER. En £

É \Ÿ7_ 0033 e 00 0 unified.book Page 158 Sunday, December 5, 2010 2:59 PM ds N 2] 4 SAFETY PRECAUTIONS CAUTION

RISK OF ELECTRIC SHOCK

TAUTION: TO RÉDUCE THE RISK OF ÉLECTRICAL SHOCK, DO NOT REMOVE COVER [OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating VAN and maintenance instructions in the documentation provided with the product. Ifthe product is used without observing the information given under this. A DANGER symbol, serious injury or death may resuk. warning 11e products used witrout obsenving the information given under this ÂÀ Symbol, injury or death may result. Ifthe product is used without observing the information given under this ÂÀ CAUTION symbol, minor personal injury, damage to the equipment, or loss of valuable data may resu. WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT. General Precautions Read All Instructions — Before you use the product read all operating instructions. Save all manuals and documentation for future reference. Cleaning — Always unplug this product from the wall outlet before cleaning. Use only à damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solventto clean this product Attachments — For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture — For precautions on products with weatherproof designs, read the weatherproofing sections. Location — To avoid damage to the product, mount the product securely on à stable tripod, stand, or bracket.

3. Power Source — Connect is product nb to the power source described on te product bel.

Foreign Objects — To avoid personal injury, never insert a metal object into the product à Heat— Never use or store this product near any heat source such as à radiator, heat register, stove,

or any type of equipment or appliance that generates heat, including stereo amplifiers

50033 e 00 0_unified.book Page 159 Sunday, December 5, 2010 2:59 PM Product Handling Precautions A WARNING Do not use the camera near lammable or explosive gases. © Do notuse the flash and LED on people (infants, small children, etc.) at close range. + You must be at least 1 m (3 f-} away from the faces of your subjects. Firing the flash tno close to the subjects eyes could cause a momentary loss of vision © keep young children and infants away from the camera. + Always use and store the camera out ofthe reach of young children and infants to prevent the following dangerous situations which could cause serious injury: + Bécoming entangled in the camera Strap, causing Strangulaton. + Accidentally swallowing the battery, cards or other small parts. + Accidentall fring the flash into their own eyes or those of another chid. + Accidentally being injured by the moving parts of the camera. @ Do notiook atthe sun or strong lights with the camera. Do notuse or store the camera in dust or humid places. © Do not cover the flash with a hand while firing. VAN CAUTION © Stop using the camera immediately if you notice any unusual odors, noise, or smoke aroun Never remove the batteries with bare hands, which may cause a fre or burn your hands. Never hold or operate the camera with wet hands. © Do not leave the camera in places where it may be subject to extremely high temperatures. + Doing so may cause part to deteriorate and, in some circumstances, cause the camera to catch fire. Do notuse the charger ifitis covered (such as a blanket. This could cause overheating, resulting in fire. © Handie the camera with care to avoid getting a low-temperature bu. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following + When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low- temperature bu may be caused + In places subjectto extremely cold temperatures, the temperature ofthe camera's body may be lower than the environmental temperature. I possible, wear gloves when handing the camera in cold temperatures © Be careful with the strap. Be careful with the strap when you carry the camera. It could easily catch on stray objects - and cause serious damage. Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns.s VAN DANGER + The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do not use any other chargers + Never heat or incinerate batteries + Take precautions when carrying or storing batteries to preventthem from coming into contactiwith any metal objects such as jewelry, pins, fasteners, et. + Neverstore batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near à heat source, et. + To prevent causing battery leaks or damaging their terminals, carefull follow all instructions regarding the use of batteries. Never atfempt to disassemble a battery or modify i in any way, by soldering, êtc. + Ibattery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. + Always store batteries out of the reach of small children. If a child accidentally swallows à battery, seek medical attention immediately. VAN WARNING + Keep batteries dry at al times. + To prevent batteries from leaking, overheating, or causing a fre or explosion, use only batteries recommended for use with this product. + Insertthe battery carefully as described in the operating instructions. uoneuuoqu

É \Ÿ7_ 0033 e 00 0 unified.book Page 160 Sunday, December 5, 2010 2:59 PM 7 + Ifrechargeable batteries have notbeen recharged within the specified time, stop charging them and do not use them. + Do notuse a battery iitis cracked or broken + Ifa battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the camera. + Ifa battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. ifthe fluid burns your skin, seek medical attention immediately. + Never subject batteries to strong shocks or continuous vibration. VAN CAUTION + Before loading, always inspectthe battery carefull for leaks, discoloration, warping, or any other abnormalt + The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after using the camera + Always unload the battery from the camera before staring the camera for a long period. + This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe and proper use, read the battery instruction manual carefuly before using it. + Ifthe battery's terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry cloth before use. + Always charge à battery when using it for the firsttime, or fit has not been used for a long period. + When operating the camera with battery power at low temperatures, y to keep the camera and spare battery as warm as possible. À battery thathas run down atlow temperatures may be restored after itis warmed at room temperature + The number of pictures you can take may vary depending on the shooting conditions or battery.

• Before gong on à long bip, and especal before tavelng abroad, purchase extra bats À recommended battery may be dificult to obtain while traveling + Please recycle batteries to help save our planets resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations. Caution for Usage Environment

• To protect the high-precision technology contained in this product, never leave the camera in the places listed below, no matter # in use or storage. + Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight, beaches, locked cars, or near other heat sources {stove, radiator, etc.) or humidiflers. + In sandy or dusty environments + Near flammable items or explosives. + In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their manuais as well 2 In places prone to strong vibrations. + Never drop the camera or Subject itto severe shocks or vibrations. + When mounted on a trpod, adjustthe position of the camera with the ipod head. Do not twistthe camera. + Do notleave the camera pointed direct atthe sun. This may cause lens or shutter curtain damage, color failure, ghostng on the image pickup device, or may possibly cause fies. + Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the body cap when removing the lens. + Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, testthe camera by tuming it on and pressing the shutter release button to make sure thatitis operating normal. + Always observe the operating environment restrictions described in the cameras manual. LCD Monitor + Do not push the monitor forcibly; otherwise the image may become vague, resulting in à playback mode failure or damage to the monitor. 2 À gtipofligñ may appear on te cop/oattom of tie monitor, Du ti is not a malunchon + When a subject is viewed diagonal in the camera, the edges may appear zigzagged on the monitor. This is not à malfunction, it will be less notceable in playback mode. + In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporaniy. When using the camera in extremely cold places, itis a good idea to occasionally place itin à warm place. An LCD monitor exhibitng poor performance due to low temperatures wil recover in normal temperatures. + The LCD used forthe monitor is made with high-precision technology. However, black spots or bright spots of light may appear constanty on the LCD Monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.

É \Ÿ7_ 0033 e 00 0 unified.book Page 161 Sunday, December 5, 2010 2:59 PM ds N 2] 4 Lens Do notimmerse in water or splash with water. Do not drop or exert strong force on the lens. Do not hold atthe moving part of the lens. Do nottouch the lens surface directly. Do nottauch the contact points directly. Do not subject to abrupt temperature changes. + The operating temperature range is -10 °C - 40 °C (14 °F - 104 °F). Always use within this temperature range Legal and Other Notices + Olympus makes no representations orwarranties regarding any damages, or benefit expected by using this unit lawulh, or any request from a third person, which are caused by the inappropriate use of this product. + Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unitlawfully which are caused by erasing picture data Disclaimer of Warranty + Olympus makes no representations orwarranties, either expressed orimplied, by or conceming any content of these written materials or software, and in no event shall be liable for any implied warranty of merchantabilty orfiness forany particular purpose or for any consequentil,incidental or indirect damages {including but not limited to damages for loss of business profits, business interruption and loss of business information) aniing from te use or nabliy to use these ten materials or sofaare or equipment, Some countries do not allow the exclusion or limitation of ablity for consequental or incidental damages, so the above limitations may not apply to you. + Olympus reserves all rights to this manual. Warning Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe > upon the rights of copyright owners. Copyright Notice Allrights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice. FCC Notice + Radio and Television Interference Changes or modifications not expressiy approved by the manufacturer may void the users authority to operate this equipment, This equipment has been tested and found to comply with the limits for à Class 8 digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in à particular installation. W this equipment does cause harmfulinterference to radio or television reception, which can be determined by tuming the gqupment of and on, tre users encouraged to y to comectthe terference by one or more otre

uoneuuoqu lowing measures: 13 - Adjust or relocate the receiving antenna. = Increase the distance between the camera and receiver. - Connectthe equipment to an outiet on a circuit different from that to which the receiver is connected. = Consul your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable should be used to connectthe camera to USB enabled personal computers (PC). Any unauthorized changes or modifications to this equipment would void the user's authority to operate it

É \Ÿ7_ 50033 e 00 0 unified.book Page 162 Sunday, December 5, 2010 2:59 PM ds N 2] 4 Use Only Dedicated Rechargeable Battery and Battery Charger We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery charger with this camera Using à non-genuine rechargeable battery and/or battery charger may result in fie or personal injury due to leakäge, heating, ignition or damage to the battery. Olympus does not assume any liabilty for accidents or damage that may result from the use of à battery and/or battery charger that are not genuine Olympus accessories For customers in North and South America For customers in USA Declaration of Conformity Model Number: E-5 Trade Name OLYMPUS Responsible Party : OLYMPUS IMAGING AMERICA INC. Address : 3500 Corporate P arkway, P.O. Box 610, Center Valley,

Telephone Number: 484-896-5000 Tested To Comply With FCC Standards

This device complies with Part 15 ofthe FCC rules. Operation is subject t the following two conditions: {2) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. For customers in CANADA S This Class B digital apparatus complies with Canadian ICES-003. S 4 / For customers in Europe CE” mark indicates thatthis product complies with the European requirements for safety, health, environment and customer protection. “CE” mark cameras are intended for sales in Europe This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electical and electronic equipment in the EU countries Please do not throw the equipment into the domestic refuse. Please use the retum and collection systems available in your country forthe disposal ofthis product. uoneuuoqui This symbol [crossed-out wheeled bin Directive 2006/68/EC Annex I] indicates separate collection of waste batteries in the EU countries. 13 Please do not throw the batteries into the domestic refuse. Please use the return and collection systems available in your country for the disposal ofthe waste batteries.

Ed \Ÿ7_ 0033 e 00 0 unified.book Page 163 Sunday, December 5, 2010 2:59 PM

Provisions of warranty this product proves to be defective, although it has been used proper (in accordance with the written Handling Care and Operating instructions supplied with it, during the applicable national warranty period and has been purchased from an authorized Olympus distributor within the business area of Olympus Europa Holding GmbH as stipulated on the website: htip:{www.olympus.com this product il be repaired, or at Olympus's option replaced, free of charge. To claim under this warranty the customer must take the product before the end ofthe applicable national warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Europa Holding GmbH as stipulated on the website: tp:/www.olympus.com. During the one year period of the World Wide Guarantee the customer may tum the product in at any Olympus service station. Please notice that not in all countries such Olympus service station exists.

2. The customer shall transport the product to the dealer or Olympus authorized service station at his own

risk and shall be responsible for any costs incurred in transporting the product Provisions of Guarantee

1. "OLYMPUS IMAGING CORP. Shinjuku Monolth, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914,

Japan grants a one year Worid Wide Guarantee. This worldwide Guarantee must be presented at an Olympus authorized repair service station before any repair can be made under conditions of this Guarantee. This Guarantee is valid only fthe Guarantee Certificate and proof of purchase are presented atthe Olympus repair service station. Please note thatthis Guarantee is in addition to and does not affect the customers legal warranty rights under the applicable national legislation goveming the sale of consumer goods mentioned above

2. This Guarantee does not cover the following and the customer will be required to pay repair charge, even

for defects occurring within the Guarantee period referred to above. () Any defect that occurs due to mishanding (such as an operation perfomed that is not mentioned in the Handling Care or other sections ofthe instructions, etc.) (b) Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than Olympus or an Olympus authorized service station: {c)_ Any defect or damage that occurs due to transport a fall shock, etc. after purchase of the product. (d)_ Any defect or damage that occurs due to ire, earthquake, flood damage, thunderbol, other natural disasters, environmental pollution and iregular voltage sources. {e)_ Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. improper maintenance, etc {9 Any defect that occurs due to exhausted batteries, etc. {g)_ Any defect that occurs due to sand, mud, etc. entering the inside ofthe product casing, {h) When the Guarantee Certificate is not retumed with the product. (When any alterations whatsoever are made to the Guarantee Certificate regarding the year, month and date of purchase, the customers name, the dealers name, and the serial number. &) When proof of purchase is not presented with this Guarantee Certificate.

3. This Guarantee applies to the product on; te Guarantee does not apply to any other accessory

equipment, such as the case, strap, lens cap and batteries

4. Oiympus‘ssole liabiity under this Guarantee shall be limited to repairing or replacing the product. Any

liabiity under the Guarantee for indirect or consequential loss or damage of any kind incurred or suffered bythe customer due to a defect ofthe product, and in particular any loss or damage caused to any lenses, films, other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data, is excluded. Compellng regulations by law remain unaffected by this. Notes regarding Guarantee maintenance This Guarantee il only be valid ifthe Guarantee Certificate is duly completed by Olympus or an authorized dealer or other documents contain suffcient proof. Therefore, please make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed or the original voice or the sales receipt (indicating the dealers name, the date of purchase and product type) is attached to this Guarantee Certificate. Olympus reserves the right to refuse free-of- charge service if either Guarantee Cerbficate is completed nor the above document à attached or ifthe information contained in it is incomplete or llegible: Since Es Guarantee Ceriicate mi not De re-ssued, keep tin a safe place +‘Please refer to the liston the web site: http:/www.olympus.com for the authorized international Olympus service network.

É \Ÿ7 0033 e 00 0 unified.book Page 164 Sunday, December 5, 2010 2:59 PM Trademarks IBM is à registered trademark of Intemational Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Macintosh is a trademark of Apple Inc. SDXC logo and SDHC logo are trademarks. “Shadow Adjustment Technology” function contains patented technologies from Apical Limited. CA) apical Four Thirds and the Four Thirds logo are trademarks or registered trademarks of OLYMPUS IMAGING Corporation in apan, the United States, the countries of the European Union, and other countries All other company and product names are registered trademarks and/or trademarks of their respective ouners. The standards for camera file systems referred to in this manual are the “Design Rule for Camera File System/DCF "standards stipulated by the | apan Electronics and Information Technology Industries Association (J EITA).

EDIT FILENAME . e-PORTRAIT EVSTEP . Exposure compensation Ed EXPOSURE SHIFT

TEST PICTURE . Trimming +

É & 50033 e 00 0_unified.book Page 168 Sunday, December 5, 2010 2:59 PM A ù Memo S S SA / EN c LA 144

É & 50033 e 00 0_unified.book Page 169 Sunday, December 5, 2010 2:59 PM A ù Memo S S SA / EN c LA 144

É & 50033 e 00 0_unified.book Page 170 Sunday, December 5, 2010 2:59 PM A ù Memo S S SA / EN c LA 144

É & 50033 e 00 0_unified.book Page 171 Sunday, December 5, 2010 2:59 PM A ù Memo S S SA / EN c LA 144