E0211 - Weather Station Emos - Free user manual and instructions

Product Type	Projection Wireless Weather Station
Model	E0211
Brand	Emos
Power Supply (Main Unit)	3× 1.5 V AAA batteries (alkaline recommended)
Power Supply (Remote Sensor)	2× 1.5 V AAA batteries (alkaline recommended)
Indoor Temperature Range	0 °C to +50 °C (resolution 0.1 °C)
Indoor Temperature Accuracy	±1 °C
Outdoor Temperature Range	-20 °C to +60 °C (resolution 0.1 °C)
Outdoor Temperature Accuracy	±1.5 °C (-20 °C to 0 °C), ±1 °C (0 °C to +60 °C)
Indoor & Outdoor Humidity Range	20 % to 90 % (resolution 1 %)
Humidity Accuracy	±5 % to 8 %
Barometric Pressure Range	850 to 1050 hPa/inHg
Wireless Sensor Frequency	433 MHz
Maximum Number of Sensors	3
Radio Signal Range	Max. 30 meters in open areas
Outdoor Temperature Reading Cycle	Every 43–47 seconds
Radio Controlled Clock	DCF77 (77.5 kHz) with automatic DST adjustment
Time Projection	Projects current time onto a wall; 180° rotation possible
Alarm	Dual alarm with snooze function (5-minute repeat)
Weather Forecast	12-24 hour forecast based on pressure changes (icons: Sunny, Partly cloudy, Cloudy, Rain, Snow)
Temperature Alert	Adjustable high/low outdoor temperature alert per sensor
Display Backlight	Blue backlight
Calendar Languages	7 languages: German, Italian, Dutch, Danish, English, French, Spanish
Cleaning Instructions	Use a slightly moistened soft cloth; do not use abrasive cleaners or solvents
Safety Instructions	Do not expose to excessive force, impacts, dust, high temperatures, rain, or humidity. Do not dip in water. Use only new alkaline batteries. Repair by professionals only.
Disposal	Dispose of product and batteries at sorted waste collection points; do not mix with unsorted municipal waste

Frequently Asked Questions - E0211 Emos

How do I set the time manually?

Hold the MODE button for 2 seconds until the year flashes. Use UP/DOWN to set year, month, day, 12/24h mode, time zone, hours, minutes, day language, °C/°F, and hPa/inHg. Press MODE to move to the next setting.

How do I connect an additional outdoor sensor?

Press UP briefly on the station to select channel 1, 2, or 3. Then long-press UP until the signal icon flashes. Insert batteries into the sensor and set its channel switch to the same channel number. Data will appear within 3 minutes.

What does the DCF radio signal do?

The station receives the DCF77 time signal from Germany (77.5 kHz) to automatically set the correct time, including daylight saving time changes. The icon appears when reception is successful.

How do I change the batteries?

For the main unit, open the rear battery cover and insert 3× AAA batteries with correct polarity. For the sensor, open the cover and insert 2× AAA batteries. Use only alkaline batteries, not rechargeable.

How do I set the alarm?

Press ALARM repeatedly to view alarm 1 (A1) or alarm 2 (A2). To set, hold ALARM for 2 seconds, then use UP/DOWN to set hour and minute. Activate alarms by pressing DOWN when the alarm time is displayed.

How do I use the time projection feature?

Press the SNOOZE-LIGHT button to project the current time onto a wall. To rotate the projection 180°, hold the SNOOZE-LIGHT button for 3 seconds. Repeat to revert.

How accurate is the weather forecast?

The forecast is based on atmospheric pressure changes and is approximately 70% accurate. It predicts weather for the next 12 to 24 hours, so it may not match current conditions.

How do I set the outdoor temperature alert?

Press TEMP ALERT to enable or disable the alert. Hold it to set the high and low temperature limits using UP/DOWN. When the outdoor temperature reaches these limits, the station will beep. Press TEMP ALERT twice to stop the beep.

How do I view the maximum and minimum temperature/humidity readings?

Repeatedly press the DOWN button to cycle through max and min indoor/outdoor readings. To clear the memory, long-press DOWN while viewing the max/min values.

What should I do if the sensor signal is lost?

First, ensure the sensor is within 30 meters of the station and not blocked by thick walls or metal. Remove and reinsert the batteries in both the sensor and station. Press and hold UP on the station to resync. If the problem persists, try placing the station near a window.

USER MANUAL E0211 Emos

GB Projection Wireless Weather Station

The E0211 weather station is composed of two basic parts – a weather forecast unit and a wireless heat sensor. The transmission from the sensor is wireless at a frequency of 433 MHz – no installation of electrical cables is required. The weather station can receive and display data from up to three wireless heat sensors.

Description of Button Functions of the Weather Station – See Figure

I – Down IV – alarm setting

II – Up V – temperature alert setting

III - MODE VI - snooze/display backlight

Description of Display Functions on the Weather Station Screen – See Figure

1 – time; 2 – alarm clock icon; 3 – weather forecast icon; 4 – pressure; 5 – pressure trend; 6 – indoor temperature and humidity; 7 – day of the week; 8 – outdoor temperature and humidity; 9 – sensor channel number (CH); 10 – icon of communication with sensor; 11 – battery cover

Sensor description

1 - LCD display
2 – Opening for hanging
3 – Battery cover

Product specifications

1 – projection of time onto the wall; 2 – calendar; 3 – double alarm with snooze option; 4 – weather forecast; 5 – indoor temperature and humidity; 6 – outdoor temperature and humidity; 7 – recording max./min. indoor and outdoor temperature and humidity values; 8 – temperature alert; 9 – pressure level trend indicator; 10 – 7 languages for days of the week; 11 – blue display backlight

radio controlled clock (DCF)

indoor temperature: 0 °C to +50 °C; resolution 0.1 °C

measurement accuracy: ±1 °C

outdoor temperature: -20 °C to +60 °C; resolution 0.1 °C

measurement accuracy: ±1.5 °C (-20 °C to 0 °C), ±1 °C (0 °C to +60 °C)

indoor and outdoor humidity: 20 % to 90 %, resolution 1 %

measurement accuracy: ±5 % to 8 %

bar. pressure measurement range: 850 to 1 050 hPa/inHg

wireless sensor: signal transmission frequency 433 MHz

maximum number of sensors: 3

radio signal range: max. 30 metres (in open areas)

outdoor temperature reading cycle: every 43–47 seconds

power

main unit:

3× 1.5 V batteries type AAA;

remote sensor unit:

2× 1.5 V batteries type AAA

SETTING UP THE DEVICE

Installation of Batteries

Wireless heat sensor

1. Open the rear battery cover.
2. Select signal transmission channel number and select measurement scale °C/°F.
3. Insert 2 batteries (type AAA 1.5 V) with the correct polarity.
4. Replace the battery cover.

Station

1. Open the rear battery cover.
2. Insert 3 batteries (type AAA 1.5 V) with the correct polarity.
3. Replace the battery cover.

Notes and Warnings:

Insert batteries into the main unit first, then into the other sensors. Use alkaline batteries only, not rechargeable ones. The station can measure up to 3 outside temperatures via 3 sensors. The pack includes only one sensor. Place the wireless heat sensor 20–30 metres away from the station. The transmission range is influenced by the construction material in the way of the transmission, as well as the mutual position of the main unit and the wireless sensor. Do not place the sensor on metal objects or in their vicinity. For best results, test various settings on the device. Though the sensors are resistant to weather conditions, they should be placed away from direct sunlight, rain or snow. Ideal placement is on the north side of the house.

Time Settings

DCF77 radio signal reception

The clock receives DCF77 radio signal in hourly intervals throughout the day. The radio signal reception takes 3 to 5 minutes. During DCF signal reception, the icon will flash. If the icon is not displayed, the DCF signal is not being received. After proper

reception of the DCF signal, the 📁 icon will be displayed permanently. If the clock has not been automatically set and the 📁 icon is not displayed within 10 minutes, the receiver is likely badly placed (most common cause). Test reception in various places. Do not place the clock on metal objects. Do not place the clock in the proximity of electrical appliances, such as TVs, computers, monitors, microwave ovens etc. Interfering electrical fields from these appliances can reach up to 2 metres. DCF signal reception can be activated manually by long pressing the DOWN button. Deactivate searching for signal by short pressing the DOWN button.

The radio controlled clock provides the most accurate time on the European continent. The radio signal propagates via radio waves (77.5 kHz) from a site near Frankfurt on the Main in Germany within a range of 1 500 km. This radio time signal automatically takes into account summer (DST) and winter time, leap years and date changes. In standard conditions (at safe distance from sources of interference, such as TV sets, computer monitors), the reception of time signal takes several minutes. If the clock does not detect the signal, follow these steps:

1. Move the weather station to another location and try to detect the DCF signal again.
2. Make sure the distance of the clock from sources of interference, such as computer monitors or television sets, is at least 1.5 to 2 meters when receiving this signal. When receiving DCF signal, do not put the weather station in the proximity of metal doors, window frames and other metal structures or objects (washing machines, dryers, refrigerators etc.).

3. In reinforced concrete structures (cellars, high-rise buildings etc.), the DCF signal reception is weaker, depending on the conditions. In extreme cases, place the weather station close to a window toward the transmitter. Reception of the DCF77 radio signal is affected by the following factors:

4. thick walls and insulation, basements and cellars

5. unsuitable local geographic conditions (difficult to predict beforehand)
   • atmospheric disturbances, thunderstorms
6. appliances with no disturbance elimination
7. television sets and computers placed near the DCF receiver

Manual Setting of Time and Other Indicators on the Weather Station

If you hold down the MODE button for 2 seconds, the year value will begin flashing. Using the UP/DOWN buttons, you can then set: year; month; day; 12/24 hour mode; time zone; hours; minutes; day of the week language; °C/°F scale and finally hPa/inHg pressure display unit. Set the desired values and units using the UP/DOWN buttons and move in the menu by pressing the MODE button. If searching for radio signal is currently active, the setting mode cannot be used.

Calendar languages are as follows:

GE - German

IT - Italian

NE - Dutch

DA - Danish

EN - English

FR - French

ES - Spanish

Time/Date Display Mode

Pressing the MODE button switches between time and date on the display. After pressing the MODE button, the display will show date instead of time and will switch back after 8 seconds.

Sensor Channel Change and Connecting Additional Sensors

1. Short press the UP button on the back of the weather station to select the desired sensor channel - 1, 2 or 3. Then long press the UP button; the icon will start flashing.
2. Remove the cover from the battery compartment and insert batteries (2× 1.5 V AAA).
3. Use the CH button to set the desired sensor channel No. - 1, 2, 3 which will be shown on the front panel display. Data from the sensor will be loaded within 3 minutes.
4. If the sensor signal is not detected, remove the batteries and reinsert them.

Displaying Maximum and Minimum Readings of Temperature and Humidity

Repeatedly pressing the DOWN button will gradually display the maximum and minimum readings of temperature and humidity. In the MAX/MIN display mode, long press the DOWN button to delete the memory of values measured.

Atmospheric Pressure and Pressure Trend

The atmospheric pressure indicator to the right of the time shows with an arrow whether pressure is rising, stable or dropping and shows the exact hPa/inHg value next to it. You can switch between the hPa and inHg pressure scale in the mode for manual setting of time and other indicators on the weather station.

Indication on the display
Pressure trend rising constant falling

Setting and Activating Alarm

Repeatedly press the ALARM button. Values set for alarm 1 (A1) and alarm 2 (A2) will be displayed. To set or change the alarm time, hold the ALARM button for 2 seconds, then set the time using the UP/DOWN buttons. The settings go in this order A1-hour > minute > A2-hour > minute. Activate alarm 1, 2 or both using the DOWN button when the ALARM time is displayed on the

screen the display will show these icons:

Snooze Feature

Pressing the [SNOOZE] button while the alarm is ringing activates the snooze function. Every 5 minutes, the alarm will trigger again automatically. The alarm icon will be flashing. If you do not respond to the ringing within 2 minutes, the device will automatically switch to snooze mode. To turn off the alarm, press any button other than SNOOZE; the alarm icon will stop flashing.

Weather Forecast

The unit is able to detect changes in atmospheric pressure. Based on the readings gathered, the station can forecast weather for the next 12 to 24 hours.

Note:

• The accuracy of forecast based on air pressure is ca 70 %.
- The icon on the display indicates the weather forecast for the next 12 to 24 hours and may not correspond to the current weather.
- The sun symbol at night-time means clear skies without clouds.

Sunny Partly cloudy Cloudy Rain Snow

Outside Temperature Alert – Setup

The activation of the temperature alert is indicated on the display by the ≈ icon. Pressing the TEMP ALERT button turns the temperature alert on and off. Holding the TEMP ALERT button activates the setting of the maximum and minimum for the outside temperature alert. Set the temperature alert values using the DOWN/UP buttons (1 °C resolution). For each sensor, the temperature limits can be set separately. After reaching the set temperature, the weather station will start beeping; press the TEMP ALERT button twice to cancel the alert. The temperature alert is active for all 3 sensors simultaneously, regardless of the sensor number shown on the display.

Snow and Hoarfrost Temperature Alert

If any of the connected outdoor sensors measure a temperature between 0 and 3 °C, the neon will be displayed.

Time Projection

After pressing the SNOOZE-LIGHT button, the projector will project the current time onto a wall. If you want to turn the projector display by 180°, hold the SNOOZE-LIGHT button for 3 seconds. To revert the change, again hold the SNOOZE-LIGHT button for 3 seconds.

Safety Instructions

The product is designed to serve you for years if used properly and with care. A few hints for proper use:

• Read the manual carefully before using this product.
• Do not expose the device to excessive force, impacts, dust, high temperatures, rain or humidity - these may cause malfunction, shorten battery life, damage the batteries and deform plastic parts.
• Do not interfere with the internal electrical wiring of the product; you may cause damage and void the warranty for the product. Leave any repair of the product to professionals.
• Do not clean the product using grinding paste or solvents. These may scratch plastic parts and damage electrical circuits. Use a slightly moistened soft cloth.
• Do not dip the device in water.
• Use only new batteries as stated in the User Manual. Do not combine old and new batteries. Old batteries may leak. Dispose of used batteries in an environmentally friendly way.
• This appliance is not to be used by persons (including children), whose physical, sensible of mental inability or the lack of experience or knowledge prevents them from safe usage of this appliance unless they are supervised or have been instructed on safe usage by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Do not dispose of the product or the batteries after the end of their service life as unsorted municipal waste; use sorted waste collection points. Correct disposal of the product will prevent adverse effects on human health and the environment. Recycling of materials contributes to the protection of natural resources. For more information about recycling of this product, contact the municipal authority, organization for processing household waste or the point of sale where you purchased the product.

Emos spol s.r.o. declares that the E0211 is in compliance with the basic requirements and other relevant provisions of Directive 2014/53/EC. The device can be freely operated in the EU. The declaration of conformity is included in the User Manual, or can be found online: http://shop.emos.cz/download-centrum/.