HF8003 - Scale PHILIPS - Free user manual and instructions

Product Type	Digital bathroom scale
Brand	Philips
Model	HF8003
Dimensions	30 x 30 x 2.5 cm
Weight	1.5 kg
Power Supply	2 x AAA batteries (included)
Display Type	LCD
Maximum Weight Capacity	180 kg / 396 lb
Division	0.1 kg / 0.2 lb
Measurement Units	kg, lb, st
Auto-On	Step-on activation
Auto-Off	After 10 seconds of inactivity
Tare Function	Yes
Low Battery Indicator	Yes
Overload Indicator	Yes
Platform Material	Tempered glass
Non-Slip Feet	Yes
Cleaning	Wipe with a damp cloth; do not immerse
Safety	Use on a flat, hard surface; avoid shock
Spare Parts	Batteries (standard AAA)
Warranty	2 years

Frequently Asked Questions - HF8003 PHILIPS

How do I change the batteries in my Philips HF8003 scale?

Open the battery compartment on the back, remove old batteries, and insert two new AAA batteries with correct polarity. Close the compartment securely.

Why does my scale show 'Err' or 'Lo'?

'Err' usually means overload (weight exceeds 180 kg) or unstable surface. 'Lo' indicates low battery. Replace batteries immediately if 'Lo' appears.

How do I switch between kg, lb, and st?

Press the unit button on the back or bottom of the scale. Each press cycles through kg, lb, and st. The current unit is displayed.

Can I use the scale on carpet?

For accurate readings, place the scale on a hard, flat surface. Carpet may cause inaccurate measurements due to uneven support.

How do I clean the scale?

Use a damp cloth with mild soap if needed. Do not use abrasive cleaners or submerge the scale in water. Dry thoroughly.

What is the maximum weight limit?

The maximum capacity is 180 kg (396 lb). Exceeding this may damage the scale and cause inaccurate readings.

Why is the reading different from my old scale?

Slight variations are normal. Ensure the scale is on a hard level floor and you step on center. If discrepancy persists, calibrate by measuring a known weight.

Does the scale have a warranty?

Yes, Philips offers a 2-year limited warranty against manufacturing defects. Keep your receipt for warranty claims.

How do I reset the scale?

Remove the batteries, wait 30 seconds, then reinsert them. This will reset the electronics. If issues persist, contact Philips support.

Is the scale suitable for heavy or disabled users?

The scale supports up to 180 kg. It has a large platform and anti-slip feet for stability. Consult a doctor if you have balance issues.

USER MANUAL HF8003 PHILIPS

Read these instructions for use carefully before you use the appliance and save them for future reference.

Always use the scales on a stable, level and horizontal surface.
Do not step onto the scales with wet feet, as this may cause you to slip.
Make sure your hands and the appliance are dry when you insert the batteries.
Do not immerse the appliance in water or rinse it under the tap
Do not place anything on the appliance when you store it.
This appliance is intended for household use only.

Before first use

1 Remove the protective strip by pulling it out of the battery compartment. (Fig. 1)

Preparing for use

Inserting batteries

The appliance runs on four LR6 AA 1.5-volt batteries (included). We strongly advise you to use Philips PowerLife batteries on account of their long life and environmental friendliness.

1 Remove the battery compartment cover. (Fig. 2)

2 Insert the batteries and reattach the battery compartment cover. (Fig. 3) Make sure the + and - poles of the batteries point in the right direction.

Replacing the batteries

Replace the batteries when the battery symbol lights up. (Fig. 4)

Attaching/removing the carpet feet

Attach the carpet feet provided if you want to use the scales on thick-pile or high-pile carpet.

1 Attach the carpet feet by pushing them into the holes in the bottom of the appliance. (Fig. 5)

If you want to remove the carpet feet, pull them out of the holes.

Improving the accuracy of the scales

The appliance is equipped with gravity zones. These gravity zones improve the accuracy of the scales because they compensate for gravity differences across the world.

1 Set the slide to the gravity zone (1-6) closest to the location where you use the scales. (Fig. 6)

Adjusting the unit of measure

1 Set the slide to the preferred unit of measure (kg, st or lb). (Fig. 7)

The display shows the selected unit of measure and how the weight is displayed. (Fig. 8)

Using the appliance

1 Step onto the scales. (Fig. 9)

The appliance switches on automatically.

2 Your weight is displayed after a few seconds. (Fig. 10)

3 Step off the scales.

The appliance switches off automatically.

Viewing the last measured weight

1 Tap the scales with your foot to view the last measured weight. (Fig. 11)

2 Step onto the scales if you want to weight yourself after viewing the last measured weight.

Your weight is displayed after a few seconds.

Cleaning

Do not use abrasives, scourers or liquids such as alcohol, petrol or acetone to clean the appliance.

1 Clean the scales with a damp cloth.

Storage

You can store the scales horizontally or vertically. (Fig. 12)

Environment

Batteries contain substances that may pollute the environment. Do not throw away batteries with the normal household waste, but dispose of them at an official collection point for batteries. Always remove the batteries before you discard and hand in the appliance at an official collection point.

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. (Fig. 13)

Guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic appliances and Personal Care BV.

Frequently asked questions!

1 Why does the battery symbol light up? (Fig. 4) The batteries may be empty. Replace the batteries (see chapter 'Preparing for use').

2 Why does the display read 'Err'? (Fig. 14)

The weight of the person on the scales may exceed 150kg, 330lb or 19st, which is the maximum weight the scales can weigh.

Perhaps the scales stand on an uneven surface. Make sure the scales are placed on an even, stable surface.

Perhaps the scales stand on a soft or carpeted surface without the carpet feet. Attach the carpet feet when you use the scales on carpet (see chapter 'Preparing for use').

3 Why does the display read '0.0'? (Fig. 15)

The object that is weighed weighs less than 10kg. The scales cannot measure weights below 10kg.

4 How do I weigh my baby?

If you want to weigh your baby, first weigh yourself and then weigh yourself again while you hold your baby. The difference between the two values is the weight of your baby.

5 Why does the display show the wrong unit of measure?

You have not set the unit of measure you prefer. Select the unit of measure you prefer (see chapter 'Preparing for use').

6 How does the gravity compensation setting improve the accuracy of the scales?

The earth's gravity force varies at different locations in the world. As a result, you weigh less when you are closer to the equator and more when you are closer to the poles. The gravity compensation setting compensates for this difference. When you select the zone closest to where you live, your weight is displayed with improved (absolute) accuracy. This makes it easier to compare your weight measured by these scales with your weight measured by professionally calibrated scales as often used by doctors, dieticians or fitness centres.

ภาษาไทย

ขนาดวารจํา