24465 - Support pour haut-parleur Konig & Meyer - Free user manual and instructions
Find the device manual for free 24465 Konig & Meyer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker Stand |
| Brand | Konig & Meyer |
| Model | 24465 |
| Material | Steel tubing, plastic caps |
| Height Adjustment | Two-piece telescopic design |
| Height Range | Approx. 900 – 1500 mm (35.4 – 59.1 in) |
| Top Plate Dimensions | 120 x 100 mm (4.7 x 3.9 in) |
| Base Dimensions | 270 x 240 mm (10.6 x 9.4 in) |
| Weight Capacity | Up to 25 kg (55 lbs) |
| Weight | Approx. 2.8 kg (6.2 lbs) |
| Load Capacity | 25 kg (55 lbs) |
| Foldable | Yes, for transport |
| Locking Mechanism | Quick-release clamp with safety pin |
| Included Accessories | 1 pair of stands, 1 Allen key |
| Surface Protection | Rubber feet and top plate padding |
| Color | Black |
| Cleaning Instructions | Wipe with a damp cloth; do not use solvents |
| Safety Notes | Ensure locking pin fully engaged; do not exceed max load |
| Spare Parts Availability | Rubber feet and top plate pads available separately |
| Warranty | 2 years against manufacturing defects |
| Intended Use | Indoor/outdoor speaker support |
Frequently Asked Questions - 24465 Konig & Meyer
How do I assemble the speaker stand?
Insert the top tube into the bottom tube, align the holes, and tighten the clamp. Secure with the safety pin. Always lock the pin fully.
What is the maximum weight capacity?
The stand can support up to 25 kg (55 lbs) per stand. Do not exceed this limit.
Can I use these stands outdoors?
Yes, the stands are made of steel with a powder-coated finish, but avoid prolonged exposure to rain. Store indoors when not in use to prevent rust.
Are the stands height adjustable?
Yes, the height is adjustable from approximately 900 mm to 1500 mm (35.4 to 59.1 inches) using a quick-release clamp.
What size speakers fit on the top plate?
The top plate is 120 x 100 mm (4.7 x 3.9 in) and works with most small to medium PA or monitor speakers. Check speaker base dimensions.
How do I clean and maintain the stands?
Wipe with a damp cloth and mild soap. Do not use abrasive cleaners. Lubricate the clamp screw occasionally with silicone spray.
Can I replace the rubber feet?
Yes, replacement rubber feet are available from Konig & Meyer as spare parts. Contact your dealer or K&M directly.
Is the stand foldable for transport?
Yes, the two-piece design allows the legs to fold flat for easy transport. The stands come with a carrying bag (not included).
What tools are needed for assembly?
An Allen key (hex wrench) is included for tightening the clamp screw. No other tools are required.
Does the stand have a safety feature?
Yes, a safety pin prevents accidental collapse. Always insert the pin after adjusting height.
User questions about 24465 Konig & Meyer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Support pour haut-parleur in PDF format for free! Find your manual 24465 - Konig & Meyer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 24465 by Konig & Meyer.