24496 - Speaker stand Konig & Meyer - Free user manual and instructions
Find the device manual for free 24496 Konig & Meyer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker Stand |
| Brand | Konig & Meyer |
| Model | 24496 |
| Height (min) | 100 cm |
| Height (max) | 180 cm |
| Height Adjustment | Stepless with locking screw |
| Base Diameter | 50 cm |
| Tilt Angle | 0° to 90° |
| Load Capacity | 50 kg |
| Material | Steel tube, die-cast aluminium |
| Surface Finish | Black powder-coated |
| Weight | 5.5 kg |
| Folding | Yes, for transport |
| Speaker Mount | 35 mm pole with M10 thread |
| Accessories Included | Carrying bag, hex key |
| Maintenance | Wipe with dry cloth; avoid solvents |
| Safety Notes | Ensure stand is on stable ground; do not exceed load capacity |
| Spare Parts Availability | Contact manufacturer or authorized dealer |
| Repairability | Modular design; user replaceable parts (feet, screw) |
| General Information | Ideal for PA speakers, monitors, and subwoofers |
Frequently Asked Questions - 24496 Konig & Meyer
How do I adjust the height of the Konig & Meyer 24496 speaker stand?
Loosen the locking screw on the tripod base, extend the tube to desired height, then tighten the screw securely. Ensure the stand is stable after adjustment.
What is the maximum load capacity of the 24496 stand?
The maximum load capacity is 50 kg. Do not exceed this weight to avoid tipping.
Can the stand be tilted?
Yes, the speaker mount can be tilted 0° to 90°. Use the tilt adjustment lever to set the desired angle.
How do I fold the stand for transport?
Fold the tripod legs inward and pull the center locking pin to collapse the mast. The stand can be stored in the included carrying bag.
What type of speaker mount does the stand have?
It features a 35 mm pole with an M10 thread for secure attachment.
Is assembly required out of the box?
Minimal assembly is needed. Typically, you only need to attach the speaker adapter plate and the feet. A hex key is included.
How do I clean the speaker stand?
Wipe with a soft, dry cloth. Do not use solvents or abrasive cleaners as they may damage the powder coating.
What should I do if the stand becomes wobbly?
Check that all locking screws are tight and that the legs are fully spread. If it still wobbles, inspect the feet and replace if worn.
Can I use this stand outdoors?
Yes, but avoid prolonged exposure to rain or moisture. The stand is powder-coated for corrosion resistance, but it's best to store it indoors when not in use.
Where can I find spare parts for the 24496?
Spare parts can be ordered from Konig & Meyer authorized dealers or directly from the manufacturer's website. Common replacement parts include the rubber feet and tilt lock knob.
User questions about 24496 Konig & Meyer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker stand in PDF format for free! Find your manual 24496 - Konig & Meyer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 24496 by Konig & Meyer.