JSRF-601F - Heat gun Cotech - Free user manual and instructions
Find the device manual for free JSRF-601F Cotech in PDF.
| Product Type | Heat Gun |
| Brand | Cotech |
| Model | JSRF-601F |
| Voltage | 230 V AC, 50 Hz |
| Air Flow (Setting 1) | 250 l/min |
| Air Flow (Setting 2) | 550 l/min |
| Temperature (Setting 1) | 70 °C (fixed) |
| Temperature Range (Setting 2) | 70–550 °C (adjustable) |
| Temperature Control | Variable dial on Setting 2 |
| Switch Settings | 0 (Off), 1 (low speed/heat), 2 (full speed with variable heat) |
| Nozzle Distance (paint removal) | Approx. 10 cm |
| Recommended Safety Equipment | Safety glasses/visor, ear protectors |
| Fire Hazard Warning | Do not use near flammable materials; never leave unattended; allow to cool before storage |
| Applications | Paint/varnish removal, defrosting pipes/locks, shrink wrapping, drying, removing stickers, waxing skis |
| Maintenance | Keep air vents clear; clean with soft cloth and mild detergent; no solvents |
| Disposal | Dispose according to local regulations |
| Compliance | EMC 2004/108/EC, Low Voltage 2006/95/EC |
| Manual Included | Yes (original instructions) |
Frequently Asked Questions - JSRF-601F Cotech
User questions about JSRF-601F Cotech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Heat gun in PDF format for free! Find your manual JSRF-601F - Cotech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JSRF-601F by Cotech.
USER MANUAL JSRF-601F Cotech
Read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. Keep the manual for future reference.
Viktig information:
natural_image
Line drawing of a handheld electric shaver tool (no text or symbols)ART.NO
18-3261
40-8228
MODEL
JSRF-601F-UK
JSRF-601F
Ver. 20130823
Original instructions
Bruksanvisning i original
Please read the entire instruction manual before use and save it for future reference. We reserve the right for any errors in text or images and for making any necessary technical changes to this document. If you should have any questions concerning technical problems please contact our Customer Services.
Safety
• If the mains lead is damaged it must only be replaced by a qualified tradesman.
• Never expose the heat gun to rain or moisture.
• Never point the heat gun towards people or animals.
- Never block the nozzle by covering it or holding it too close to the object being heated.
- Harmful or toxic gases can be produced when heating paint or varnish. Make sure your work area is well-ventilated.
Warning – Fire hazard!
The tool can become a fire hazard if used improperly. Please take the following into consideration:
- Be careful when using the tool in the vicinity of flammable materials.
- Do not hold the heat gun over the same area for a long time.
- Never use the tool in an explosive atmosphere.
- Heat can spread and ignite flammable materials which are not within sight.
- Stand the heat gun up after use and let it cool sufficiently before putting it away for storage.
- Never leave the heat gun unattended when it is switched on.
- Never use the heat gun for drying clothes or as a hair dryer.
- The high temperatures produced by the heat gun can ignite flammable or explosive materials.
Description of the product
Product labelling with safety symbols
natural_image
Icon of a person reading a book inside a circle (no text or symbols)Please read the entire instruction manual and follow the safety rules.
Always use ear protectors.
Always use safety glasses / visor.
Operation
On/off switch and temperature control
The on/off switch has 3 settings 0 - 1 - 2:
0 Off.
1 The motor runs at low speed and produces low heat.
2 The motor runs at full speed and the heat can be controlled using the temperature control (3).
- If you need both hands for another task, the heat gun can be laid on a flat surface (with the nozzle raised up). The nozzle will become very hot; don't hold your hands too close.
- When removing paint, use a suitable paint scraper and work from the top down. Scrape off paint with smooth even strokes while simultaneously warming the paint in front of the scraper by sweeping the heat gun in a back and forth motion. When the paint has been heated sufficiently, even thick layers can be easily removed.
- The edge of your scraper must be cleaned often to keep it sharp and effective. Scrape off the paint immediately after heating as the paint hardens quickly.
- For contoured surfaces, the paint must first be heated until it softens and then be removed with a steel brush.
• Cover any adjacent surfaces which are not to be heated with a non-flammable material. - Never point the heat gun towards a window or any other glass surface.
- After use the heat gun should be placed in an upright position and allowed to cool before it is put away.
Note: The heat gun is suitable for the removal of oil and latex based paints. It cannot remove stains, primer and wood treatment residue. Emissions from lead paint can be dangerous to your health. Always provide for good ventilation when working indoors.
Removing paint/varnish
- Switch the heat gun on and let it warm up to operating temperature.
- Keep the nozzle about 10 cm from the paint to be removed.
- Do not overheat. Otherwise the paint will begin to burn and it will be even more difficult to remove.
Other applications
- Removing stickers and labels.
- Defrosting frozen metal pipes, door locks, padlocks, etc. Do not attempt to defrost plastic pipes!
- Bringing out wood grain before staining or painting.
- Quick-drying of paint and varnish. Especially useful when colour matching is required by applying several layers of paint.
- Removing old window putty before applying new.
• Drying wood before processing it.
• Heating shrink wrap film. - Waxing skis.
• Shrinking heat-shrink tubing.
Care and maintenance
- Keep the air inlet and outlet clear.
- Clean the product using a clean soft cloth and a little mild detergent. Never clean the product using solvents or flammable liquids.
Waste disposal
The product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local authority.
Specifications
Voltage 230 V AC, 50 Hz
Position 1 Air flow 250 l/min and temperature 70 °C (not controllable in position 1)
Position 2 Air flow 550 l/min and controllable temperature 70–550 °C
Varmluftspistol variabel
ART.NR 18-3261 MODELL JSRF-601F-UK 40-8228 JSRF-601F
natural_image
Icon of a person reading a book inside a circle (no text or symbols)natural_image
Icon of a person reading a book inside a circle (no text or symbols)natural_image
Icon of a person reading a book inside a circle (no text or symbols)natural_image
Icon of a person reading a book inside a circle (no text or symbols)Declaration of Conformity
EMC directive 2004/108/EC
EN 55014-1:2006+A1
EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2008
LOW VOLTAGE DIRECTIVE 2006/95/EC
EN 60335-1:2002
+A1+A11+A12+A2+A13
EN 60335-2-45:2002+A1:2008
EN 62233:2008
Klas Balkow President
Insjön, Sweden, 2011-05-12
SVERIGE
KUNDTJÄNST Tel: 0247/4 45 00
Fax: 0247/4 45 09
E-post: kundservice@clasohlson.se
INTERNET www.clasohlson.se
BREV Clas Ohlson AB, 793 85 INSJÖN
NORGE
KUNDESENTER Tlf.: 23 21 40 00
Faks: 23 21 40 80
E-post: kundesenter@clasohlson.no
INTERNETT www.clasohlson.no
POST Clas Ohlson AS, Postboks 485 Sentrum, 0105 OSLO
SUOMI
ASIAKASPALVELU Puh.: 020 111 2222
POSTAL 10 – 13 Market Place
Kingston Upon Thames
Surrey
KT1 1JZ
DEUTSCHLAND
- Viktig information:
- Safety
- Warning – Fire hazard!
- Description of the product
- Product labelling with safety symbols
- Operation
- On/off switch and temperature control
- Removing paint/varnish
- Other applications
- Care and maintenance
- Waste disposal
- Specifications
- Varmluftspistol variabel
- Declaration of Conformity
- SVERIGE
- NORGE
- SUOMI
- DEUTSCHLAND
Brand : Cotech
Model : JSRF-601F
Category : Heat gun