EH5010 - Heating BLAUPUNKT - Free user manual and instructions

Product Type	Fan Heater
Brand	Blaupunkt
Model	EH5010
Power Supply	220-240V ~50Hz
Maximum Power Consumption	3000W
Nominal Heat Output	2.0 kW
Minimum Heat Output	1.0 kW
Heating Settings	Cool blow (fan only), 1500W, 3000W
Thermostat Control	Mechanical thermostat with adjustable temperature
Safety Features	Overheat protection, thermal cut-out
Minimum Room Size	6 m²
Minimum Distance from Objects	50 cm (sides), 1 m (front hot air outlet)
Placement	Horizontal stable surface or wall mount
Cleaning	Switch off, unplug, cool, clean with damp cloth
Maintenance	Periodically check power cord; professional repair only
Certification	CE marked, compliant with EU directives
Intended Use	Domestic use, well-insulated spaces only
Not Suitable For	Bathrooms, showers, or rooms with incapable persons without supervision
Additional Precautions	Do not cover, do not place directly under socket, do not use with external timer
Contact	2N-Everpol Sp. z o.o., Warsaw, Poland

Frequently Asked Questions - EH5010 BLAUPUNKT

What is the power of the Blaupunkt EH5010 heater?

The heater has a maximum power consumption of 3000W and a nominal heat output of 2.0 kW. It offers three settings: cool blow (fan only), 1500W, and 3000W.

Can I use this heater in a bathroom?

No, the manual explicitly states: Do not use in areas with increased humidity, bathrooms, showers etc. It is also not to be placed in the immediate vicinity of a bath, shower, or swimming pool.

How do I clean the heater?

Before cleaning, ensure the heater is switched off, unplugged, and cooled down. Clean the air inlets and outlets with a damp cloth and wipe dry. Do not immerse in water.

What should I do if the heater overheats?

In case of overheating, the thermal cut-out will turn off the device. Unplug the heater, wait for it to cool down, and investigate the cause (e.g., blocked air vents). After cooling, plug in and restart.

Is the heater suitable for small rooms?

The heater is suitable for well-insulated spaces but must not be used in rooms smaller than 6 m². It is also not recommended for small rooms occupied by persons unable to leave without supervision.

Can I leave the heater unattended?

No, never leave the product connected to the power source without supervision. Additionally, the device is not designed to be controlled automatically by external timers or remote controls.

What is the minimum distance from furniture?

Maintain a distance of at least 50 cm from furniture, curtains, or other objects. For the hot air outlet, keep flammable materials at least 1 m away to reduce fire risk.

Does the heater have a thermostat?

Yes, it has a mechanical thermostat that allows you to adjust the temperature. The heater will maintain the chosen temperature automatically.

How many heat settings does it have?

The heater has three settings: cool blow (fan only), 1500W (medium heat), and 3000W (maximum heat). Select via the power knob.

Can I use an extension cord?

If necessary, use an extension cord with a grounded, 3-core cable. Ensure the total power consumption of all devices plugged into the extension cord does not exceed its power rating. Arrange to avoid tripping.

USER MANUAL EH5010 BLAUPUNKT

EN: This product is only suitable for well-insulated spaces or occasional use.

Model No: EH5010
Item	Symbol	Value	Unit		Item	Unit
Heat output					Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	P_nom	2,0	KW		manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	P_min	1,0	KW		manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	P_max,c	2,0	KW		electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption					fan assisted heat output	No
At nominal heat output	el_max	N/A	KW		Type of heat output/room temperature control (select one)
At minimum heat output	el_min	N/A	KW		single stage heat output and no room temperature control	No
In standby mode	el_SB	0	KW		Two or more manual stages, no room temperature control	No
					with mechanic thermostat room temperature control	Yes
					with electronic room temperature control	No
					electronic room temperature control plus day timer	No
					electronic room temperature control plus week timer	No
					Other control options (multiple selections possible)
					room temperature control, with presence detection	No
					room temperature control, with open window detection	No
					with distance control option	No
					with adaptive start control	No
					with working time limitation	No
					with black bulb sensor	No
Contact details	2N-Everpol Sp. z o.o.ul. Puławska 403A, 02-801 Warsaw, Poland

IMPORTANT NOTES

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

• This device is for domestic use only. Do not use for any other purposes.

• The device should only be connected to an earthed socket with values corresponding to the values on the rating label.

- It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.

- Make sure the cable is grounded, 3-cores with a socket and an earth cable.

- Do not let cord hang over edge of counter, or touch any hot surface.

- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

• The device can be used in living quarters, workshops, construction sites and greenhouses.

- Before maintenance work always disconnect the unit from the power supply.

- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.

• Never leave the product connected to the power source without supervision.
• Never put the power cable, the plug or the whole device into the water or any other liquids. The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
• Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
• This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
  • Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
  • Children of less than 3 years should be kept away unless continuously supervised.
  • Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
  • Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
• Never use the product close to combustibles.
• Never expose the product to atmospheric conditions such as direct sun light or rain, etc... Never use the product in humid

conditions (like bathroom or camping house).☒

- The power cable should be periodically checked for damage.

- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.

- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.

Notice: Do not cover the device or obstruct air inlets or outlets of the heater.

- Do not use in rooms below 6m^2 .

- Do not use in areas with increased humidity, bathrooms, showers etc.

- Remember to maintain a 50 cm distance from furniture, curtains or other objects when using the heater.

• Always turn the thermostat controller to minimum and switch the heater off before unplugging the device.

- WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

- Do not insert objects through the safety grill or the air inlets.

- This product is only suitable for well-insulated spaces or occasional use.

- Do not use this heater if it has been dropped.

- Do not use if there are visible signs of damage to the heater.

- Place the heater on a horizontal and stable surface or, if available, fasten it to the wall.

- WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the hot air outlet.

- The heater must not be placed directly under an electrical outlet.

- Do not use the heater in the immediate vicinity of a bath, shower or swimming pool.

- CAUTION: Some parts of this unit may become very hot and cause burns when touched. Special care should be taken if children and vulnerable persons are present.

CE

Device is compliant with EU directives:

• Low voltage directive (LVD)
• Electromagnetic compatibility (EMC)
  Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL DATA

Voltage: 220-240V\~50Hz

Power: 3000W

1. Power knob
2. Thermostat regulation knob

SAFETY FEATURES

In case of overheating, thermostat will turn off the device. Unplug the heater and wait until it cools down. Find the cause of overheating. Heater can be plugged in and switched back on after cooling down.

USE

Fan heater has 3 settings:

1. Cool blow (only fan is operating)
2. 1500W (medium heat)
3. 3000W (maximum heat)
   Turn on device by switching the on/off knob to required mode and turning the thermostat regulation knob.
   Thermostat allows adjusting the temperature of heating. Fan heater will maintain the chosen

temperature.

CLEANING AND MAINTENANCE

Before cleaning the heater make sure that it has been switched off, unplugged from the power socket.

Make sure the device has cooled down sufficiently.

Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.

WAŻNE INFORMACJE

02-801 Warsaw, Poland

phone:[phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

Email:[e-mail]

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.