HOOVER HDG6DCK3BWIFI - Range hood

HDG6DCK3BWIFI - Range hood HOOVER - Free user manual and instructions

Find the device manual for free HDG6DCK3BWIFI HOOVER in PDF.

📄 44 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HOOVER HDG6DCK3BWIFI - page 4
View the manual : English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Under-cabinet range hood
Brand Hoover
Model HDG6DCK3BWIFI
Width 60 cm
Depth 50 cm
Height 15 cm (without chimney)
Weight 8.5 kg
Power Supply 220-240 V, 50 Hz
Maximum Power 150 W (motor) + 2x3 W (lamps)
Airflow (Max) 650 m³/h
Number of Speeds 3 + intensive
Noise Level (Max) 68 dB(A)
Control Type Touch control with Wi-Fi
Lighting 2x LED, 3 W each
Filter Type Aluminum grease filter
Charcoal Filter Optional (for recirculation mode)
Installation Modes Ducted or recirculation
Duct Diameter 150 mm
Remote Control Via smartphone app
Energy Class A+
Annual Energy Consumption 35 kWh
Grease Filter Cleaning Reminder Yes
Child Lock Yes

Frequently Asked Questions - HDG6DCK3BWIFI HOOVER

How do I install the Hoover HDG6DCK3BWIFI range hood?
Refer to the installation section in the manual. Ensure the hood is mounted securely to the wall or cabinet above the cooking surface. The ducting must be properly connected if using extraction mode. For recirculation, install activated charcoal filters.
Can I use this range hood in recirculation mode?
Yes, the HDG6DCK3BWIFI can be used in recirculation mode. You will need to purchase and install optional activated charcoal filters. The manual provides instructions for fitting them.
How do I clean the grease filters?
The aluminum grease filters can be removed and washed by hand with warm soapy water or in the dishwasher. Ensure they are completely dry before reinstalling. Clean them every 3-6 months depending on usage.
How do I connect the Wi-Fi feature?
Download the Hoover H-Flex app on your smartphone. Power on the hood, activate Wi-Fi by pressing and holding the Wi-Fi button for 3 seconds. Follow the app instructions to connect to your home network.
What should I do if the range hood is not extracting properly?
Check if the grease filters are clogged and clean them. Ensure the duct is not blocked or kinked. If using recirculation, replace the charcoal filters. Also verify that the speed setting is appropriate for the cooking level.
How often should I replace the charcoal filters?
Charcoal filters should be replaced every 3-6 months, depending on usage frequency and cooking type. They are not washable. The hood may have an indicator light to remind you.
Is there a remote control included?
No physical remote control is included. The hood can be controlled via the touch panel or the Hoover H-Flex app on your smartphone.
What is the noise level of this range hood?
The noise level varies by speed. At the highest speed, it is approximately 68 dB(A). Lower speeds are quieter. The intensive mode is louder but more powerful.
How do I reset the filter cleaning indicator?
After cleaning or replacing the filters, press and hold the filter reset button (usually the timer or light button) for 3-5 seconds until the indicator light turns off. Consult the manual for exact steps.
Can I install this range hood under a microwave?
No, this is a standard under-cabinet range hood intended for installation below a cabinet or on the wall. It should not be installed beneath a microwave. Follow the recommended mounting height (65-75 cm above cooking surface) for safety.

User questions about HDG6DCK3BWIFI HOOVER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual HDG6DCK3BWIFI - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDG6DCK3BWIFI by HOOVER.

USER MANUAL HDG6DCK3BWIFI HOOVER

INSTALLATION AND USER'S MANUAL

CONTENT

INTRODUCTION

SAFETY PRECAUTION

SPECIFICATION 05

INSTALLATION (VENT OUTSIDE) 06

INSTALLATION (VENT INSIDE) 14

DESCRIPTION OF COMPONENTS 15

OPERATION 15

MAINTENANCE 18

TROBULESHOOTING 19

CONFORMITY WITH DIRECTIVES 20

ENVIRONMENTAL PROTECTION 20

INTRODUCTION

Thank you for choosing this cooker hood.

This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance. In order to operate the unit correctly and safety, please read this instruction manual carefully before installation and usage.

The cooker hood uses high quality materials, and is made with a streamlined design. Equipped with large power electric motor and centrifugal fan, it also provides strong suction power, low noise operation, non-stick grease filter and easy assembly installation.

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive 2014/53/EU and with the relevant Statutory Requirements (for the UKCA market).

The full text of the declaration of conformity is available at the following internet address: www.candy-group.com.

SAFETY PRECAUTION

☐ Never let the children operate the machine.
☐ The cooker hood is for home use only, not suitable for barbecue, shop and other commercial purpose.
☐ The cooker hood and its filter should be clean regularly in order to keep in good working condition.
☐ Clean the cooker hood according to the instruction manual and keep the unit from danger of burning.
☐ Forbid the direct baking from the gas cooker.
☐ Please keep the kitchen room a good convection.
Before connecting this appliance check that the power supply cord is not damaged. A damage supply cord must be replaced by qualified service personnel only.
☐ There shall be adequate ventilation of the room when the range hocs is used at the same time as appliances burning gas or other fuels;
☐ The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels;
☐ Regulations concerning the discharge of air have to be fulfilled. This appliance if not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person slide for their safety.

Children should be supervised to ensure that they do not play with the appliance.
☐ Do not flambé under the range hood.

CAUTION: Accessible parts may become hot when used with cooking appliance

- These shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room);

  • the details concerning the method and frequency of cleaning.
  • there is a fire risk if cleaning is not carried out in accordance with the instructions; - do not flame under the range hood;
  • CAUTION: Accessible parts may become hot when used with cooking appliances.

Electrical Shock Hazard

Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.

Failure to follow these instructions can result in death, fire, or electrical shock.

graph LR A["LED"] <--> B["LED"]

The lamp used in this product is not suitable for use in the lighting of a room.

The purpose of this lamp is to provide illumination for using the product.

Electrical Installation

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.

The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.

The cable must not be bent or compressed.

Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed

This appliance is supplied with a 3 core mains cable coloured as follows:

Brown = L or Live

Blue = N or Neutral

Green and Yellow = E or Earth

EUR N (Blue) L (Brown) ⊕ (Green/Yellow) UK DOUBLE POLE SWITCHED FUSED SPUR OUTLET USE A 3AMP FUSE

The fuse must be rated at 3 Amps.

Standard Installation Accessories List

Spec.Illustration PictureQty
CasingHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 21
Upper ChimneyHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 31
Lower ChimneyHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 41
Lower chimney bracketHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 51
Upper chimney bracketHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 61
Hanging BoardHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 71
φ8 rawl plugsφ8×φ6 white colorHOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 89
ScrewsST4.0×30HOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 99
φ7.2screwsST4.0×8HOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 102

If you have an outlet to the outside, your cooker hood can be connected below picture by means of an extraction duct (enamel, aluminum, flexible pi inflammable material with an interior diameter of 150mm)

Diagram of airflow around a mechanical component with directional arrows indicating movement (no text or symbols)

  1. Before installation, turn the unit off and unplug it from the outlet.

HOOVER HDG6DCK3BWIFI - WARNING: This is a Class I appliance and MUST be earthed - 12

  1. The cooker hood should be placed at a distance of 65\~75cm above the cooking plane for best effect.

65cm 75cm

  1. Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten the bracket onto the wall with the screws provided.

Wall plug Screw(4mm x 30mm) Wall bracket 107.5mm

For inclined panel Model

- eed to drill 2x8mm extra holes & fixing screws & screw plugs before installation. Voor schuine modellen

Technical line drawing of a rectangular device with internal components and alignment lines (no text or symbols)

  1. Leave up the cooker hood and hang onto the wall bracket hook.

Wall bracket Cooker hook

  1. Fix the one-way-valve to the air outlet of the cooker hood. Then, attached the exhaust pipe onto the one-way-valve as shown below.

Exhaust pipe Cooker hood

6.

i. Place the glass in appropriate position on the top the cooker hood.

ii. Fix with 4 screws and washer. In order to avoid the glass cracking, please do not tighten the screws too strongly.

i. By Put the inner chimney into outer chimney .Then pulling out the inner chimney upwards. Adjust to reach the height required

Isometric line drawing of a brick chimney mounted on a platform, with no visible text or symbols

ii. Sliding the chimney to adjust the chimney height. When the height you required is reached, then hang the fixing hole to the screws as showed in below pictures.

Inner chimney Outer chimney

8.

i. Drill 2 x 8mm holes to accommodate the plate II. Screw and tighten the plate II onto the wall with 2 screws provided.
ii. Assembly the chimney onto the unit and fix it with 2 screws.

Plate II Wall plug Screw 4mm x 8mm Screw (4mm x 30mm)

StandardInstallationAccessoriesList

Spec.IllustrationPictureQty
AirDeflectorHOOVER HDG6DCK3BWIFI - For inclined panel Model - 71
BracketHOOVER HDG6DCK3BWIFI - For inclined panel Model - 81
φ8 rawl plugs φ8×φ6 white colorHOOVER HDG6DCK3BWIFI - For inclined panel Model - 92
Screws ST4.0×30HOOVER HDG6DCK3BWIFI - For inclined panel Model - 102
Screws ST3.5×12HOOVER HDG6DCK3BWIFI - For inclined panel Model - 112

Airdeflectorismentionedasincludedandnotoptional.

  1. FixthebrackettotheT-shapedplasticoutletwith2pcsST3.5x12mmscrews providedasshownbelow:

Diagram showing a mechanical assembly before and after transformation, with no visible text or symbols.

  1. Drill2holesonthewalltoaccommodatethewallplugs,thenscrewand tightenthebracketontothewallwith2pcsST4x30mmscrewsprovided.

Diagram of a kitchen chimney mounted on a brick wall, with no visible text or symbols

  1. Attach the exhaust pipe onto the air outlet of the cooker hood as shown below:

Line drawing of a black smokestack mounted on a white chimney against a brick wall (no text or symbols)

  1. Install the chimney to the unit and fix it.

Line drawing of a double-hopper kitchen chimney mounted on a brick wall (no text or symbols)

o“Pleasekindlybenoted:T-shapedplasticoutletandv-flapscannotbeused at the same time. You can usethemintwoways:1) Addv-fla utlet;2)UseT-shapedplasticoutlet,noaddv-flap.”

o"Note: Theproductisprovidedwithv-flapaccessory. Thisaccessoryisnot mandatoryforinstallation,operationanduseoftheproduct."

INSTALLATION (VENT INSIDE)

If you do not have an outlet to the outside, exhaust pipe is not required the installation is similar to the one show in section "INSTALLATION (VENT OUTSIDE)".

Diagram of a mechanical or fluid system with directional arrows indicating flow or movement (no text or symbols)

Activated carbon filter can be used to trap odors.

In order to install the activated carbon filter, the grease filter should be detached first. Press the lock and pull it downward.

Simple line drawing of a hand pressing down on a flat surface with an arrow indicating downward motion (no text or symbols)

Illustration of a hand pressing down on a piano keyboard (no text or symbols)

Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.

Technical line drawing of a mechanical component with no visible text or symbols

NOTE:

o Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
o When activated carbon filter attached, the suction power will be lowere

DESCRIPTION OF COMPONENTS

HOOVER HDG6DCK3BWIFI - DESCRIPTION OF COMPONENTS - 1

HOOVER HDG6DCK3BWIFI - DESCRIPTION OF COMPONENTS - 2

Empty rectangular frame with no text, symbols, or content inside

HOOVER HDG6DCK3BWIFI - DESCRIPTION OF COMPONENTS - 4

HOOVER HDG6DCK3BWIFI - DESCRIPTION OF COMPONENTS - 5

OPERATION

HOOVER HDG6DCK3BWIFI - OPERATION - 1

Timer button

  1. Setting the time of the day

When hood in standby mode (motor not working), press the timer button to enter the time setting.

Press the 'Fan speed' key to set the hour of the day and press the 'Light' key to set the minute.

  1. Setting the Timer

When the hood is in operation mode, press the timer button to set the countdown.

Press the timer button one timer then the countdown will increase one minute. The max countdown is 60 minutes.

HOOVER HDG6DCK3BWIFI - Timer button - 1

FAN SPEED Button

Standby mode: the backlit of all buttons and LCD display are off, long press the speed button or lamp button approximately at 0.5 seconds: the buzzer buzz once, the backlit of the button will light on, the speed icon or lamp icon in the LCD display will light on, and the cooker hood enter into power on mode; if only the motor working, short press the “-” button to speed 1, the cooker hood will enter into standby mode if press the “-” button again, or only the lamp is on, short press the lamp button then enter into standby mode.

Boost Function:

1. Boost 1(speed 4):Fan speed at level 5 +TURBO

HOOVER HDG6DCK3BWIFI - Boost 1(speed 4):Fan speed at level 5 +TURBO - 1

Press the speed button to speed 4, the fan icon in the LCD display shows motor is working and the speed icon in the LCD display shows speed is working at level 5+ TURBO, the cooker hood is working at boost mode.

2. Boost 2(speed 5):Fan speed at level 6 +TURBO

HOOVER HDG6DCK3BWIFI - Boost 2(speed 5):Fan speed at level 6 +TURBO - 1

Press the speed button to speed 5, the fan icon in the LCD display shows motor is working and the speed icon in the LCD display shows speed is working at level 6 + TURBO, the cooker hood is working at boost mode.

Note: Enter into Boost speed while the hood is in use and it will increase speed for 5 minutes, before slowing down again.

HOOVER HDG6DCK3BWIFI - Boost 2(speed 5):Fan speed at level 6 +TURBO - 2

Wi - Fi Connection

Setting the time of the day

Long press WiFi icon and enter into connecting mode: the backlit of WiFi icon keep flashing indicate the connection is under connecting, the backlit of WiFi icon is light on indicate it is connected, same for standby mode; long press WiFi icon again and the connection will be stopped;

HOOVER HDG6DCK3BWIFI - Wi - Fi Connection - 1

LIGHT Button

For lighting ON & OFF.

LCD display

1 2 3 4 TURBO 00:00 5 6 7 8

  1. Motor symbol, will rotate when the motor is working;
  2. Time display;
  3. Timer symbol, will appear when timer is setting and counting;
  4. Light symbol;
  5. Motor speed;
  6. Turbo speed symbol, will appear when the speed is highest setted;
  7. Alarm symbol, will appear 5 seconds when the counting down of timer is over.
  8. Cleanning alarm, appear when total working time up to 14 hours or at the first time using after plugging.

Download hOn App

HOOVER HDG6DCK3BWIFI - Download hOn App - 1

First of all, you should download hOn APP and install to your portable device. Then enroll your hood.

QR code image containing encoded data, no visible human-readable text

HOOVER HDG6DCK3BWIFI - Download hOn App - 3

NOTE

Get ready to add your appliance

1 Stay close to your appliance
2 While in front of your appliance, ensure that your smartphone is connected to a 2.4GHz Wi-Fi network with a stronger signal
CHANGE WI-FI SETTINGS
3 Public networks are not allowed due to low security and reliability.
4 Prepare to enter your Home Wi-Fi password.

ENROLLMENT HOOVER HOOD

Exterior view of a black industrial air conditioner unit with a sensor icon and signal symbol (no text or symbols on the device itself)

The image of the hood has the only purpose of presenting it. May not be perfectly representative.

1- Press the WiFi button until the icon starts blinking When the pairing is completed the WiFi icon will be on.

MAINTENANCE

Before cleaning switch the unit off and pull out the plug.

I. Regular Cleaning

Use a soft cloth moistened with hand-warm mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material or stiff brush to clean the unit.

II. Monthly Cleaning for Grease Filter

ESSENTIAL: Clean the filter every month can prevent any risk of fire.

The filter collects grease, smoke and dust..... so the filter is directly affecting the efficiency of the cooker hood. If not cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with household cleaning detergent.

III. Annual Cleaning for Activated Carbon Filter

Apply SOLELY to unit that installed as a recirculation unit (not vented to the outside). This filter traps odors and must be replaced at least once a year

depending on how frequent the cooker hood used.

IV. Changing a light bulb

Remove the screws on the glass, take off the hood glass. Find the bulb that requires replacement, you will find it located in the light fixture which is inside the exposed section of the canopy.

Pure electrical circuit lines without any symbols

Disconnect the light wiring point and remove the bulb holders and wiring from the hood. Important: It's not possible to replace the bulbs individually, it will be necessary to obtain the bulbs, bulb holders and wiring as a complete part. (LED light: MAX 1.5W)

Fit the replacement bulbs, bulb holders and wiring in the same manners as the originals. Then reconnect the light wiring point.

Refit the hood glass and fasten the glass screws. Make sure the screws are fully tightened.

TROBULESHOOTING

Fault CauseSolution
Light on, but fan does not workThe fan blade is jammed.Switch off the unit and repair by qualified service personnel only.
The motor is damaged.
Both light and fan do not workHalogen light bulb burn.Replace the bulb with correct rating.
Power cord looses. Plug in to the power supply again.
Serious Vibration of the unitThe fan blade is damaged.Switch of the unit and repair by qualified service personnel only.
The fan motor is not fixed tightly.Switch off the unit and repair by qualified service personnel only.
The unit is not hung properly on the bracket.Take down the unit and check whether the bracket is in proper location.
Suction performance not goodToo long distance between the unit and the cooking planeReadjust the distance to 65-75cm
Technology Wi-Fi
Standard802.11 b/g/n
Frequency Band(s)[MHz]2400 MHz - 2483.5 MHz
Maximum Power[mW]100mW
Product information for networked equipment
power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated:2 W
How to activate wireless network port:If the Hood has been enrolled with the APP, turn on the Hood to activate wireless network port.
How to deactivate wireless network port:If the Hood has been enrolled with the APP, turn off the Hood to deactivate wireless network port. If the Hood hasn’t been enrolled with the APP, wireless network port will be deactivated even the Hood is on.

CUSTOMER ASSISTANCE SERVICE

If you cannot identify the cause of the operating anomaly, switch off the appliance and contact the Assistance Service.

PRODUCT SERIAL NUMBER. Where can I find it?

It is important you to inform the Assistance Service of your product code and its serial number (a 16 character code which begins with the number this can be found on the guarantee certificate or on the data plate located on the appliance.

It will help to avoid wasted journeys to technicians, thereby (and most significantly) saving the corresponding callout charges.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer for recycling advice.

HOOVER HDG6DCK3BWIFI - ENVIRONMENTAL PROTECTION - 1

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Azul = N (Neutral) o NEUTRAL

Verde y amarillo = E (Earth) o TIERRA

HOOVER HDG6DCK3BWIFI - ENVIRONMENTAL PROTECTION - 2

Diagram of airflow around a mechanical component with directional arrows indicating movement (no text or symbols)

Simple line drawing of a hand pressing down on a piano keyboard (no text or symbols)

Cierre

NOTA:

HOOVER HDG6DCK3BWIFI - NOTA: - 1

NOTA

Get ready to add your appliance

1 Stay close to your appliance
2 While in front of your appliance, ensure that your smartphone is connected to a 2.4GHz Wi-Fi network with a stronger signal

CHANGE WI-FI SETTINGS

3 Public networks are not allowed due to low security and reliability.
4 Prepare to enter your Home Wi-Fi password.

REGISTRO CAMPANA HOOVER

Exterior view of a black stainless steel kitchen air duct with a mounted chimney, shown with an inset image of a Wi-Fi signal icon (no text or symbols on the device itself)

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HOOVER

Model : HDG6DCK3BWIFI

Category : Range hood