BLACK & DECKER BSL150 - Flashlight

BSL150 - Flashlight BLACK & DECKER - Free user manual and instructions

Find the device manual for free BSL150 BLACK & DECKER in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BLACK & DECKER BSL150 - page 13
View the manual : English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Rechargeable LED Spotlight
Brand Black & Decker
Model BSL150
Light Source LED
Lumens 150 lm
Beam Distance 200 m
Battery Type Lithium-Ion (Integrated)
Battery Voltage 3.7 V
Battery Capacity 1.8 Ah
Charging Time 4 - 6 hours
Runtime - High Beam 2 hours
Runtime - Medium Beam 4 hours
Runtime - Flashing Light 5 hours
Runtime - Red Flashing Warning >10 hours
Operating Modes High, Medium, Flash, Red Warning
Weight 0.62 lbs (0.33 kg)
Charging Input AC adaptor (100-240V~50/60Hz) and 12V car adaptor
Protection Double insulated; rubber lens guard
Switch Type Trigger switch with quick-off feature
Cleaning Blow dust from vents; wipe with damp cloth and mild soap
Maintenance No user-serviceable parts; repairs by authorized service centers
Included Accessories AC charger, 12V car adaptor, carrying strap
Disposal Separate collection; do not dispose with household waste

Frequently Asked Questions - BSL150 BLACK & DECKER

How many lumens does the BSL150 spotlight produce?
The BSL150 produces 150 lumens on high beam.
What is the battery type and capacity?
It uses an integrated Lithium-Ion battery with a voltage of 3.7V and capacity of 1.8Ah.
How long does it take to fully charge the spotlight?
Full charging takes approximately 4 to 6 hours.
What are the different lighting modes and their runtimes?
Four modes: High beam (120 lumens, 2 hrs), Medium beam (36 lumens, 4 hrs), Flashing light (5 hrs), and Red flashing warning (more than 10 hrs).
Can I charge the spotlight in a car?
Yes, it comes with a 12V car adaptor for charging from a vehicle's cigarette lighter.
Is it safe to look directly at the LED?
No, never look directly into the LED as it can cause eye damage.
How should I clean and maintain the spotlight?
Clean by blowing dust from vents and wiping with a damp cloth and mild soap. Do not use solvents.
What should I do if the spotlight gets wet?
The spotlight is not waterproof and should only be used in dry indoor areas. If wet, dry thoroughly before use.
Where can I get the spotlight repaired?
Take it to an authorized BLACK+DECKER service center for repairs. The unit has no user-serviceable parts.
How should I dispose of the spotlight at the end of its life?
Do not dispose with household waste. Follow local regulations for separate collection of electronic products.

User questions about BSL150 BLACK & DECKER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Flashlight in PDF format for free! Find your manual BSL150 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSL150 by BLACK & DECKER.

USER MANUAL BSL150 BLACK & DECKER

MANUAL DE INSTRUÇÕES

INSTRUCTIONS MANUAL

REFLECTOR LED RECARGABLE

FÁROL PORTÁTIL LED RECARREGÁVEL

WARNING: READ INSTRUCTIONS MANUAL BEFORE USING PRODUCT.

English (original instructions) 13

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not a…

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

Fig. A BLACK+ DECKER 1 5 2 3 7 8 6 4

1 Rubber ring guard
2 Charge LED
3 Charging socket
4 Carrying strap
5 Trigger switch
6 Charger jack plug
7 AC charger
8 12V Car adaptor

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: To reduce the risk of injury, read the instruction manual.

NOTE: The image may differ slightly from the actual unit.

ENGLISH

DO NOT RETURN THIS PRODUCT TO THE STORE,

first contact your local BLACK+DECKER office

or nearest authorized service center.

NING! Read and understand all instructions.

Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

GENERAL SAFETY RULES

SAFETY INSTRUCTIONS

BLACK & DECKER BSL150 - SAFETY INSTRUCTIONS - 1

ral power tool safety warnings.

Warning! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

  • Read all of this manual carefully before using the appliance.
  • The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
  • Retain this manual for future reference.

Using your Appliance

Always take care when using the appliance.

a) This appliance is not intended for use by young or infirm persons without supervision.
b) The appliance is not to be used as a toy.
c) Use in a dry location only. Do not allow the unit to become wet.
d) Do not immerse the appliance in water.
e) Do not open body casing. There are no user-serviceable parts inside.
f) Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
g) To reduce the risk of damage to plugs and cords never pull the cable to remove the plug from a socket outlet.

After Use

h) When not in use, the appliance should be stored in a dry, well ventilated place out of the reach of children
i) Children should not have access to stored appliances
j) When the appliance is stored or transported in a vehicle it should be placed in the boot or restrained to prevent movement following sudden changes in speed or direction.

k) The appliance should be protected from direct sunlight, heat and moisture.

Inspection and Repairs

1) Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
m) Do not use the appliance if any part is damaged or defective.
n) Have any damaged or defective parts repaired or replaced by an authorised repair agent.
o) Never attempt to remove or replace any parts other than those specified in this manual.

Service

p) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Electrical Safety

BLACK & DECKER BSL150 - Electrical Safety - 1

Your tool is double insulated; therefore no earth wire is required. Always check that the main voltage corresponds to the voltage on the rating plate.

WARNING! If the power cord is damaged, it must be replaced by the manufacturer, authorized BLACK+DECKER Service Center or an equally qualified person in order to avoid damage or injury. If the power cord is replaced by an equally qualified person, but not authorized by BLACK+DECKER, the warranty will not be valid.

Labels on Tool

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V....volts

Hz hertz

min ...... minutes

or DC.....direct current

Class I Construction (grounded)

.../min.....per minute

BPM.....beats per minute

Construction (double insulated)

n0 ......no load speed

n ......rated speed

⊕ ....earthing terminal

⚠️......safety alert symbol

▲......visible radiation

......wearrespiratory protection

weareye

protection

O....wearhearing

protection

readall

documentation

BLACK & DECKER BSL150 - Labels on Tool - 1

This appliance is intended for indoor use only.

BLACK & DECKER BSL150 - Labels on Tool - 2

The charger automatically shuts off if the ambient temperature becomes too high. As a consequence the charger will be inoperable. The charging base must be disconnected from the mains supply and taken to an authorised service centre for repair.

BLACK & DECKER BSL150 - Labels on Tool - 3

This product must not be disposed of with normal household waste.

ADDITIONAL SPECIFIC SAFETY RULES

Additional Safety Instructions for Spotlights

WARNING: To reduce the risk of injury, the user must read the instruction manual.

RISK OF DAMAGE TO THE EYES! never look directly in the LED.

  • Allow the spotlight to fully cool down before storage or charging.
  • Keep combustible materials away from spotlight lens. Extreme heat can cause fires.
  • Never place the light face-down on any surface when it is switched on or cooling.
  • Do not leave the spotlight unattended. Keep children and animals away from the work area.
  • Inspect the lens for damage following impact or if the spotlight is dropped. Do not operate without the lens in place or with a damaged lens.
  • The lens is manufactured from glass. The lens may crack or break if subject to an impact. If the lens is damaged it must be replaced by manufacturers original parts. Wear gloves as sharp edges may cause injury. Never look directly into the light or shine the light into another person's eyes.
  • Do not immerse spotlight in water.
  • This product is sensitive to electrostatic discharge. During the electrostatic discharge, the lamp may switch on and off automatically.
    • The light can only be used in dry in door areas.
  • Use only with the BLACK+DECKER charging adapters that are provided with unit. Plug in the charging adapter at the spotlight first, then plug into the charging source.

ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS

Batteries

  • Never attempt to open for any reason.
  • Do not charge damaged batteries.
  • Do not expose the battery to water.
  • Do not expose the battery to heat.
  • Do not store in locations where the temperature may exceed 40 °C.
  • Charge only at ambient temperatures between 4°C and 40°C .
  • Charge only using the chargers provided with the tool.

- When disposing of batteries, follow the instructions given in the section "Protecting the environment".

Chargers

Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.

WARNING! Never attempt to replace the charger unit with a regular mains plug.

Use your BLACK+DECKER charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury and damage.

  • Have defective cords replaced immediately.
  • Do not expose the charger to water.
  • Do not open the charger.
  • Do not probe the charger.

All batteries lose charge with time, specially when they are warm. Recharge the unit every two months for 24 hours when not in frequent use.

If the unit is not going to be used for extended periods, disconnect the charger and store in a cool, dry place.

Handling Rechargeable Devices

DANGER OF FIRE! Only use batteries approved by the manufacturer. Only use chargers approved by the manufacturer. Keep battery away from metal objects that could cause short circuiting when not in use. There is a risk of injuries and fires.

  • Prior to connecting the charger, verify that the power supply connection corresponds with the connecting data of the device.
  • The fuse must be a residual current circuit-breaker with a measured residual current of no more than 30 mA.
  • Only charge the battery in closed rooms.
  • Fluid can escape from the battery when used incorrectly. Battery fluid may result in skin irritations and burns. Avoid contact! In the event of accidental contact, rinse thoroughly with water. Immediately seek the aid of a physician in the event of eye contact.

OPERATION

Press the rubber trigger switch multiple times to toggle between lighting modes.

4 Modes of Operation

• High beam (120 lumen, 2 hrs)
• Medium beam (36 lumen, 4hrs)
- Flashing light (5 hrs)
• Red flashing warning light (more than 10 hrs)

Maximum beam distance: 200 meters

Quick beam off: When the light is ON for 5 seconds or longer, press the switch once to turn OFF.

The spotlight is designed for heavy duty use as it is equipped with a bright globe, rubber lens protector and lightweight handle grip.

ENGLISH

The spotlight is ideal for security, outdoor, camping fishing, night game drives, mining, industrial and general use. LED globes are shockproof and never need replacing. The casing is durable and lightweight therefore easy to carry and point wherever it is needed.

MAINTENANCE

Your BLACK+DECKER tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Your charger does not require any maintenance apart from regular cleaning.

WARNING: To reduce the risk of serious personal injury, turn off the tool and disconnect it from the power source before making adjustments or removing / installing devices or accessories. An accidental start could cause injuries.

il important! To ensure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified organizations, always using identical replacement parts. Unit contains no user service able parts inside.

CLEANING

WARNING: Blow dirt and dust from all ventilation with dry air, at least once a week. To reduce the risk of injury, always use ansi z87.1 Approved eye protection when performing this task.

WARNING: Never use solvents or other abrasive chemicals to clean non-metallic parts of the tool. These chemicals can weaken the plastic materials used in these parts. Use a cloth dampened only with water and neutral soap. Never allow liquid to penetrate inside the tool or immerse any of the parts in a liquid.

ACCESSORIES

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center.

WARNING! The use of any accessory not recommended for use with this tool could be hazardous.

PROTECTING THE ENVIRONMENT

BLACK & DECKER BSL150 - PROTECTING THE ENVIRONMENT - 1

Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your BLACK+DECKER product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

BLACK & DECKER BSL150 - PROTECTING THE ENVIRONMENT - 2

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the

household, at municipal waste sites or by the retailer when you purchase a new product.

BATTERIES

BLACK & DECKER BSL150 - BATTERIES - 1

BLACK+DECKER batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment:

  • Run the battery down completely, then remove it from the tool.
  • NiCd, NiMH and Li-Ion batteries are recyclable. Take them to any authorized repair agent or a local recycling station.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For more information about our authorized service centers and if you need technical advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.blackanddecker-la.com

TECHNICAL DATA

1 Top LEDLumen(W)150 (3)
Weight Ibs (kg) 0.62 (0.33)
Charging cable connectionWith AC adaptor and 12V car adaptor
CHARGER (adaptor)
TYPE AR B3 B2 BR
Input voltage V 220 120 220 127/220
FrequencyHz 50 6050/60 60
Output voltage6 V---
CurrentmA500
Charge time hr4 - 6
BATTERY
Voltage3.7 V---
CapacityAh1.8
Running timehrHigh: 2
Low: 4
Type of batteryLithium Ion Integrated

CNPJ: 53.296.273/0001-91

Insc. Est.: 701.948.711.00-98

S.A.C.: 0800.703.4644

Col. Santa Fé, Alvaro Obregón

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BLACK & DECKER

Model : BSL150

Category : Flashlight