IAN 366612 - Uncategorized Livarno Lux - Free user manual and instructions

Product Type	LED Fireplace Style Lantern
Model	IAN 366612
Brand	Livarno Lux
Power Source	3 x LR6/AA (1.5V) batteries (included)
Light Source	LED (non-replaceable)
Timer Function	Yes, 6 hours on / 18 hours off automatic cycle
Switch Positions	ON, OFF, TIMER
Protection Class	IP20 (indoor use only, no water protection)
Safety Class	III (SELV - safe extra low voltage)
Mounting Options	Freestanding on level surface or hanging via suspension ring
Battery Compartment	Bottom of product, screw-locked cover
Indoor Use Only	Yes
Cleaning	Dry cloth only; do not use chemicals or immerse in water
Disposal	Separate from household waste; recycle batteries per local regulations
Certification	CE (EMC 2014/30/EU, RoHS 2011/65/EU)
Distributor	Tradix
Service Hotline	00800 30012001 (free, mobile networks may vary)
IAN Number	366612_2101

Frequently Asked Questions - IAN 366612 Livarno Lux

How do I insert or replace the batteries?

Turn the product off. Unlock and remove the cover on the bottom of the battery compartment. Insert 3 LR6/AA batteries according to polarity. Close the cover securely.

How does the timer function work?

Slide the switch to the TIMER position. The lantern will automatically turn off after 6 hours and turn back on after 18 hours, repeating daily as long as the switch remains in TIMER.

Can I use this lantern outdoors?

No, the lantern is rated IP20 and designed for indoor use only. It is not protected against water or moisture.

How do I clean the lantern?

Remove batteries before cleaning. Wipe with a dry, soft cloth only. Do not use any detergents, chemicals, or immerse in water.

What type of batteries does it require?

It requires 3 LR6/AA (1.5V) batteries. They are included in the package.

Is it safe to leave the lantern unattended with the timer on?

Yes, the timer function is designed for safe unattended operation. The lantern will automatically switch off after 6 hours and on again after 18 hours.

Can I replace the LED bulbs?

No, the LEDs are non-replaceable. If the light fails, the entire unit should be disposed of according to local regulations.

How do I hang the lantern?

Screw the provided suspension ring into the top of the lantern. Then hang it on a suitable hook or cord ensuring it is secure and will not fall.

Where can I dispose of the product and batteries?

Do not dispose with household waste. Batteries must be recycled at designated collection points. The lantern can be taken to a local recycling center.

What should I do if the product is defective?

Contact the service hotline [phone]) or email [e-mail]. Have the till receipt and IAN number (366612_2101) ready.

USER MANUAL IAN 366612 Livarno Lux

LED FIREPLACE STYLE LANTERN

LED FIREPLACE STYLE LANTERN

INSTRUCTION MANUAL

HR

LED SVJETILJKA U OBLIKU KAMINA

PRLEVOD IZVORNIH UPUTA ZA UPORABU

RS

LED FENJER U OBLIKU KAMINA

UPUTIVO ZA UPOTREBU

BG

LED ФЕНЕР ПОД ФОРМАА НА

КАМИНА

ОМИПИНАЛНО УПЫТВАНЕ ЗА УПОТРЕБА

DEATCH

LED-KAMINLATERNE

BEDIENLNGSANLEITUNG

60

Before reading, please unfold the illustrations page and familiarise yourself with all device functions. The illustration numbers appear in the corresponding position within the text.

H

Instruction manual 5

graph TD
    A["1) Electron flow"] --> B["3 x 16x/AA"]
    B --> C["2) Electron flow"]
    D["+ - +"] --> E["Diagram showing electron movement and charge distribution"]
    F["C1"] --> G["Diagram showing electron flow"]
    H["C2"] --> I["Diagram showing electron flow"]

GB CY

LED FIREPLACE STYLE LANTERN Instruction manual

1. Introduction 5
2. Safety 6
3. Scope of delivery (A) 6
4. Technical specifications ....6
5. Safety information 6
   5.1 Safety instructions regarding batteries .....7
6. Start-up 8
   6.1 Inserting/replacing the battery (B) 8
   6.2 Mounting suspension hooks 8
   6.3 Use 8
7. Cleaning and care instructions......8
8. Conformity declaration 8
9. Disposal 9
10. Processing in case of guarantee claim .....9
11. Distributor 9
12. Service address 9

1. Introduction Congratulations!

With this, you have chosen a high-quality product. The operating instructions are an integral part of this product. They contain important information for safety, use and disposal. Familiarise yourself with all of the operating and safety information before using the product. Only use the product as described and for the specific areas of application. Provide all of the documentation when passing the product on to third parties. Keep the instructions for future reference.

Explanation of symbols

The following symbols and signal words are used in these operating instructions, on the product or on the packaging.

Hereinafter, the LED Fireplace Style Lantern will be referred to as product.

WARNING!

This signal symbol/word indicates a hazard with a high level of risk which, if not avoided, may result in death or serious injury.

CAUTION!

This signal symbol/word indicates a hazard with a low level of risk which, if not avoided, may result in minor or moderate injury.

NOTE!

This signal word warns of possible property damage or provides you with useful additional information regarding the use.

Note about handling these operating instructions.

This symbol indicates interior use only.

This symbol indicates usage.

This symbol indicates potential danger to children.

This symbol indicates the age rating of the product.

This symbol indicates potential danger from cut injuries.

This symbol indicates potential danger in relation to electric shocks.

This symbol indicates potential danger in relation to overheating.

This symbol indicates potential danger in relation to explosions.

This symbol indicates potential danger from handling batteries / rechargeable batteries.

This symbol indicates that batteries are included in the scope of delivery.

This symbol indicates that the product is equipped with a TIMER.

三

This symbol indicates direct current.

IP20 This symbol indicates Protection Class IP20. (No protection against water, but against solid objects of more than 12.5 mm diameter. The product may only be used in a dry environment.)

This symbol indicates protection class III. SELV: safe extra-low voltage

! WARNING!

Risk of injury!

3. Scope of delivery (A)

i
•
n
。
-
下
4
1.
n
i n F i n
i n F i n
i n F i n
i n F i n
i n F i n
i n F i n
i n F i n
i n F i n
i n F i n

GB/CY GB/CY

CAUTION!

Danger of overheating!

Remove packaging prior to use.

6. Start-up

1. Remove all packaging materials.

2. Check whether all parts are available and undamaged.

If this is not the case, notify the specified service address.

6.1 Inserting/replacing the battery (B)

Before the first use OR when the light of the LEDs becomes weaker, the 1c/2c batteries must be inserted OR replaced.

For this, proceed as follows:

1. Switch the product 1c/2c off (see "6.3. Use")

2. Unlock (1) and remove (2) the cover 3 from the battery compartment 4.

3. Remove any depleted batteries from the battery compartment 4.

4. Insert (3) the 3 supplied batteries 1/2 OR 3 new IR6/AA batteries into the battery compartment 4 according to the polarity.

5. Afterwards, close the battery compartment 4

6.2 Mounting suspension hooks

- Screw the suspension ring 1b/2b into the product 1a/2a. See Fig. C1 for the product 1c OR Fig.

C2 for the product 2.

The product 1a/2a is now ready to use.

Setting up the product

Set up the product 1c/2c in an appropriate place.

NOTE!

- The surface should be even, so that the product 1c /2c cannot fall over. The place should have sufficient free space around the 1c/2c product.

- Place a protective blanket underneath the product 1a/2a. Sensitive surfaces could become scratched by the product 1c/2c.

Hanging up product

Alternatively, you can hang the product 1c/2a on an existing hook on a cord.

NOTE!

- Make sure that the place is suitable.

Make sure that the product 1a/2a is safeguarded from falling down.

Make sure that there is sufficient free space around the product 1c/2d, in case the product 1c/2c starts to swing. It could collide with another object and the pane could break. There is a risk of injury!

Ensure that the materials used, such as hooks and string, are adapted to the load from the weight of the product 1a/2a. If you are not certain, ask a specialist.

6.3 Use

On/Off switching off the product (D)

To turn on the product 1c/2c, slide the switch 5 on the bottom of the battery compartment 1c/2c to the "ON" position. To switch off, slide the switch 5 to the "OFF" position.

Timer function (D)

The product 1c/2c is equipped with a timer function. If you move the switch 3 to the "TIMER" position, the timer function will switch on. If the timer function is switched on, the product 1c/2c will switch off automatically after 6 hours. After another 18 hours, the product 1c/2c will automatically switch back on. As long as the switch 5 is left in the "TIMER" position, this daily rhythm will be repeated.

7. Cleaning and care instructions

CAUTION!

Risk of injury!

Before cleaning, you must remove the batteries from the battery compartment. There is a risk of electric shock!

- only clean with a dry cloth

- do not use any strong detergents and/or chemicals

- do not immerse in water

- store in a cool, dry place and protected from UV light

8. Conformity declaration

CE This device complies with the fundamental requirements and other relevant regulations of the European Electromagnetic

Compatibility Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The complete original conformity declaration is available from the importer.

9. Disposal

Disposal of the packaging

The packaging and operating instructions are made of 100 % environmentally

friendly materials, which you may dispose of at local recycling centres.

Disposal of the product

The product may not be disposed of with normal household waste. Please find out about disposal options for the product from your local authority or town administration.

Disposal of the battery / rechargeable batterie

- Defective or used rechargeable batteries have to be recycled in accordance with Directive 2006/66/EC and its amendments.

- Batteries and disposable batteries are not permitted to be disposed of with household waste. They contain harmful heavy metals. Marking: Pb (= lead), Hg (= mercury), Cd (= cadmium). You are legally obligated to return used batteries and rechargeable batteries. After use, you can either return batteries to our point of sale or in the direct vicinity (e.g. with a retailer or in municipal collection centres) free of charge. Batteries and rechargeable batteries are marked with a crossed-out waste bin.

With this QR code, you can directly reach the Lidl Service website (www.lidl-service.com) and can open your operating instructions be entering the article number (IAN) 366612_2101.

11. Distributor

Hotline: [phone](free of charge, mobile networks may vary)

E-Mail: [e-mail]

E-Mail: [e-mail]

03/2021/PO31030017

Tradix Item No.: 366612-21-A,-B

IAN 366612_2101

10. Processing in case of guarantee claim

To ensure quick processing of your concern, please follow the instructions below:

- Please have the till receipt and article number available (e.g. IAN 366612_2101) as proof of the purchase.

- You can find the article number on the rating plate on the product, as an engraving on the product, the title place of your instructions (bottom left) or the sticker on the back or underside of the product.

- If malfunctions or other defects occur, first contact the service department below by telephone or e-mail.

- You can then send a product that has been recorded as being defective, including the proof of purchase (till receipt) and stating what the defect is and when it occurred, postage-free to the service address provided to you.

On www.lidl-service.com, you can download these an many other manuals, product videos and installation software.

HR HR

HR

Tradix BR: 366612-21-A,-B

IAN 366612_2101

Apt. Na ha Tradix: 366612-21-A,-B

Apt. № на Tradix: 366612-21-A,-B

IAN 366612\_2101

*Чл.112

3 x LR6/AA-Batterien 2c