Meraki GR10 - Access Point CISCO - Free user manual and instructions
Find the device manual for free Meraki GR10 CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Access Point |
| Model | Meraki GR10 |
| Brand | Cisco |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Dimensions (W x D x H) | 10.5 x 10.5 x 2.3 in (26.7 x 26.7 x 5.8 cm) |
| Weight | 1.8 kg (4.0 lb) |
| Power Supply | PoE+ (802.3at) or 12V DC adapter (optional) |
| Power Consumption | 25W (typical) |
| Mounting | Wall, pole, or ceiling mount included |
| Operating Temperature | -40°C to 55°C (-40°F to 131°F) |
| Weather Rating | IP67 |
| Management | Cisco Meraki Cloud Dashboard |
| Security | WPA3, 802.1X, VLAN, ACL |
| Antennas | Integrated directional antennas |
| Max Data Rate | 2.4 Gbps (aggregate) |
| Interfaces | 1x 2.5 GbE (RJ45) with PoE in |
| LED Indicators | Power, WAN, LAN, signal strength |
| Cleaning Instructions | Wipe with a dry cloth; do not use liquids or sprays |
| Spare Parts Availability | Mounting kit and replacement antennas available |
| Repair Service | Contact Cisco Meraki support or authorized reseller |
Frequently Asked Questions - Meraki GR10 CISCO
How do I set up the Meraki GR10 access point?
Connect the access point to a PoE+ switch, then claim it in your Meraki Dashboard under 'Add devices'. Follow the on-screen instructions to configure the network.
What power supply is required for the GR10?
The GR10 supports 802.3at PoE+ (Power over Ethernet) or an optional 12V DC adapter. Ensure your switch provides PoE+.
Can I mount the GR10 outdoors?
Yes, the GR10 is IP67 rated and designed for outdoor use. It can be mounted on a wall, pole, or ceiling using the included hardware.
How do I reset the GR10 to factory defaults?
Press and hold the reset button on the back of the device for 10 seconds using a paperclip. The LED will flash, indicating a reset.
Does the GR10 support Wi-Fi 6?
Yes, the Meraki GR10 supports Wi-Fi 6 (802.11ax) for improved capacity and efficiency in dense environments.
What is the maximum number of clients supported?
The GR10 can support up to 200 concurrent clients under typical conditions, depending on traffic.
How do I clean the GR10?
Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or sprays as they may damage the unit.
Can I use the GR10 with a non-Meraki switch?
Yes, but the switch must provide 802.3at PoE+ to power the access point. The Meraki Dashboard management still works via cloud.
What spare parts are available for the GR10?
Replacement mounting kits and antennas can be purchased from Cisco Meraki or authorized resellers.
How do I troubleshoot connectivity issues?
Check the LED indicators: solid green means normal operation. If flashing, verify PoE power and network connectivity. Use the Dashboard to view logs and signal strength.
User questions about Meraki GR10 CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Meraki GR10 - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Meraki GR10 by CISCO.