Aironet 3600i - Access Point CISCO - Free user manual and instructions
Find the device manual for free Aironet 3600i CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | Cisco Aironet 3600i |
| Wireless Standard | 802.11n (Dual-band 2.4 GHz & 5 GHz) |
| MIMO Configuration | 3x4 (3 spatial streams) |
| Maximum Data Rate | 450 Mbps (per radio) |
| Ethernet Ports | 1x Gigabit Ethernet (PoE+) |
| Dimensions | 8.5 x 8.5 x 1.75 in (21.6 x 21.6 x 4.4 cm) |
| Weight | 2.0 lbs (0.9 kg) |
| Power Supply | PoE+ (802.3at) or optional AC adapter (12V, 2.5A) |
| Power Consumption | 12.95W typical |
| Security | WPA2, WPA3, 802.1X, AES encryption |
| Antennas | Internal dual-band antennas (3x4 MIMO) |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Humidity | 10% to 90% (non-condensing) |
| Mounting Options | Ceiling (rail), wall, or desk |
| Management | Cisco IOS, CLI, web UI, or Cisco Prime |
| LED Indicators | Power, Ethernet, Radio, Status |
| Regulatory Certifications | FCC, CE, IC, UL, Wi-Fi Alliance |
| Maintenance & Cleaning | Wipe with dry cloth; avoid liquids and abrasives |
| Spare Parts & Repairability | Replacement antennas and mounting brackets available; no user-serviceable internal parts |
Frequently Asked Questions - Aironet 3600i CISCO
How do I reset the Cisco Aironet 3600i to factory defaults?
Press and hold the MODE button (located on the back panel) for 10-15 seconds while powering on the device. The LEDs will flash, indicating a reset. Configuration will be restored to factory defaults.
What is the default IP address and login credentials?
The default IP address is 10.0.0.1 (or obtain via DHCP). Default username: Cisco, password: Cisco (case-sensitive). Change immediately for security.
Does this access point support PoE?
Yes, the Aironet 3600i supports PoE+ (802.3at). It can also be powered via an optional 12V DC adapter if PoE is not available.
Can I use the Aironet 3600i as a standalone access point without a controller?
Yes, it supports autonomous mode (standalone) using Cisco IOS software. It can also operate in lightweight mode with a wireless LAN controller.
How do I configure the SSID and security settings?
Access the web interface via browser, go to Wireless > SSID Management. Select or create an SSID, set security to WPA2-Personal or Enterprise, and configure encryption.
What are the supported wireless frequencies?
It supports 2.4 GHz (channels 1-11/13) and 5 GHz (channels 36-165 depending on regulatory domain). Dual-band simultaneous operation is supported.
How do I update the firmware?
Download the latest firmware from Cisco Support Site. Upload via web interface under Administration > File Management > Software Management. Reboot after upgrade.
What is the maximum number of clients supported?
Cisco recommends up to 200 clients per radio (400 total) under optimal conditions, but performance varies with environment and traffic.
Can I mount the access point on a wall?
Yes, the Aironet 3600i includes mounting brackets for ceilings (T-rail), walls, and desks. Ensure proper ventilation and secure mounting.
How do I troubleshoot connectivity issues?
Check LED indicators: solid green means good, blinking means activity. Verify PoE or power supply. Access the CLI with 'show interfaces' and 'show wireless client' commands.
User questions about Aironet 3600i CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Aironet 3600i - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aironet 3600i by CISCO.