Nika CH66038-60SAM - Range hood Respekta - Free user manual and instructions
Find the device manual for free Nika CH66038-60SAM Respekta in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Range Hood |
| Brand | Respekta |
| Model | Nika CH66038-60SAM |
| Width | 60 cm |
| Height | 17 cm |
| Depth | 50 cm |
| Weight | 12 kg |
| Power Supply | 230 V, 50 Hz |
| Motor Power | 200 W |
| Maximum Extraction Rate | 650 m³/h |
| Noise Level (max) | 65 dB |
| Controls | Push buttons |
| Lighting | LED, 3 W |
| Grease Filter | Aluminum mesh, washable |
| Carbon Filter | Optional, for recirculation mode |
| Number of Speeds | 3 |
| Installation Type | Under cabinet / built-in |
| Duct Diameter | 150 mm |
| Energy Class | A |
| Warranty | 2 years |
Frequently Asked Questions - Nika CH66038-60SAM Respekta
How do I install the Respekta Nika CH66038-60SAM range hood?
The hood is designed for built-in installation under a cabinet. Ensure adequate clearance above the hob (at least 65 cm for electric, 75 cm for gas). Connect the exhaust duct (150 mm diameter) to the outside or use the recirculation mode with a carbon filter. Secure the hood with the provided screws.
How often should I clean the grease filter?
Clean the aluminum mesh grease filter every 2-3 months depending on usage. Remove it from the hood, wash with warm soapy water or in the dishwasher, and dry thoroughly before reinstalling.
Can I use the hood without an external exhaust?
Yes, you can use the recirculation mode. You need to install an optional carbon filter (not included) to absorb odors. The air is then re-circulated into the kitchen.
What is the maximum noise level of this hood?
The maximum noise level is 65 dB at the highest speed. In normal operation, the noise is lower and comparable to a conversation.
How do I replace the LED light?
The LED light is not user-replaceable. If it fails, contact Respekta customer service for assistance. Avoid attempting to replace it yourself to prevent electrical hazards.
What does the slider/button control?
The push buttons control the fan speed (3 levels) and the light. Some models may have a slider; refer to your specific model. Press the speed button to cycle through levels; press the light button to turn on/off.
How do I reset the filter cleaning indicator?
Some Respekta models have a filter cleaning reminder. After cleaning the filter, press and hold the light button (or a specific button) for 3-5 seconds until the indicator turns off. Consult your manual for exact instructions.
What is the energy class of this hood?
The Respekta Nika CH66038-60SAM is rated energy class A, meaning it is energy-efficient and consumes minimal power during operation.
Can I install the hood myself or do I need a professional?
While the installation is straightforward, it involves electrical wiring and ductwork. If you are not experienced, it is recommended to hire a qualified electrician or technician to ensure safety and proper functioning.
Where can I find spare parts or accessories like carbon filters?
Spare parts including carbon filters can be purchased from Respekta's official website or authorized retailers. Use the model number (CH66038-60SAM) to find compatible accessories.
User questions about Nika CH66038-60SAM Respekta
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Nika CH66038-60SAM - Respekta and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nika CH66038-60SAM by Respekta.