ASF701 - Fan BLAUPUNKT - Free user manual and instructions

Product Type	Stand Fan
Model	ASF701
Brand	Blaupunkt
Power Supply	220-240V~50Hz
Power Input	55 W
Maximum Fan Flow Rate	70.74 m³/min
Fan Power Input (measured)	52.5 W
Service Value	1.35 (m³/min)/W
Standby Power Consumption	0.27 W
Fan Sound Power Level	59.6 dB(A)
Maximum Air Velocity	2.5 m/s
Number of Blades	5
Operating Modes	Standard, Natural, Night
Timer	Up to 1 hour (in 1-hour increments)
Oscillation	Yes (with oscillation lock)
Height Adjustment	Telescopic stand with locking screw
Display	Timer and temperature display (auto-off after 30s)
Control	Push buttons on control panel
Safety Features	Overheat protection, no automatic start, child safety (age 8+)
Cleaning	Wipe with dry cloth, blow out interior with compressed air or vacuum
Material	Plastic, metal
Certification	CE, EMC, LVD
Contact for Service	Tel: [phone], Email: [e-mail]

Frequently Asked Questions - ASF701 BLAUPUNKT

How do I assemble the fan?

First, attach the fan feet to the base to form a cross. Then place the stand on the base and secure with screws. Install the back guard, then the fan blade, then the front guard. Refer to the manual for detailed steps.

How do I clean the fan?

Unplug the fan before cleaning. Wipe the body and stand with a dry cloth. For the interior, use compressed air or a vacuum cleaner to remove dust. Do not use water or liquid cleaners.

What do the different operating modes do?

Standard mode runs the fan continuously at the selected speed. Natural mode varies the speed to simulate a natural breeze. Night mode gradually reduces speed every 30 minutes until lowest setting.

How do I set the timer?

Press the timer button to set a delay before the fan turns off. Each press adds one hour, up to a maximum. The display will show the remaining time. To cancel, set timer to 0.

Can I use the fan outdoors or in the bathroom?

No, this fan is intended for indoor use only. Do not use in humid areas like bathrooms or near water to avoid electric shock.

What should I do if the fan stops working?

Check if it is plugged in and the outlet is working. Ensure the power cord is not damaged. If the problem persists, contact the service center at [phone] or [e-mail].

Is the fan safe for children?

Children aged 8 and above can use the fan under supervision. Do not allow children to play with the fan or clean it without supervision. Keep the fan out of reach of young children.

How do I adjust the height?

Loosen the locking screw on the telescopic stand, adjust the stand to the desired height, then tighten the screw again.

Can I use an extension cord?

Yes, but ensure the total power consumption of all devices plugged into the extension cord does not exceed its rating. Avoid tripping hazards by arranging the cord properly.

What does the display sleep mode do?

The display automatically turns off 30 seconds after the last button press to reduce distraction. Press any button to wake it up.

USER MANUAL ASF701 BLAUPUNKT

Modern office fan with five blades mounted on a stand, no visible text or symbols

Enjoy it.

Stand fan

Stehender Lüfter

Wentylator stojący

Tyčový ventilátor

Efficiency information

ASF701
Description	Symbol	Value	Unit
Maximum fan flow rate	F	70,74	m3/min
Fan power input	P	52,5	W
Service value	SV	1,35	(m3/min)/W
Standby power consumption	PSB	0,27	W
Fan sound power level	LWA	59,6	dB(A)
Maximum air velocity	C	2,5	meters/sec
Measurement standard for service value	IEC 60879: 1986
Contact details for obtaining more information	2N-Everpol Sp. z o.o.ul. Puławska 403A02-801 Warsaw, Polandphone: [phone]e-mail: [e-mail]

Important notes

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

- This device is for domestic use only. Do not use for any other purposes.

- The device should only be connected to an socket with values corresponding to the values on the rating label.

- It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.

- Do not let cord hang over edge of counter, or touch any hot surface.

- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

- Before maintenance work always disconnect the unit from the power supply.

- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.

- Damage to the power cord or plug can lead to an electrocution hazard.

- Never leave the product connected to the power source

without supervision.

- Never put the power cable, the plug or the whole device into the water or any other liquids.

- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.

• Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.

• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as direct sun light or rain, etc... Never use the product in humid conditions (like bathroom or camping house).

• The power cable should be periodically checked for damage.

- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.

- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not

work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.

• All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
• Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
• Do not block the airflow or cover the device.
• Regularly clean the fan of dust so that dirt does not block the air flow.
• Do not insert any objects between the machine's protective grilles.
• Do not use the fan in rooms with high humidity, such as bathrooms, etc. Do not place the fan in places where it could fall into a bathtub, wash basin or other water tank.
• Never use the fan without the fan grilles installed.
• Do not turn on the fan if it is not assembled properly, particularly when fan grilles are not installed.
• Do not place the fan near curtains or other objects that can get accidentally caught by the fan.

CE

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

Technical data

Power: 55W

Power supply: 220-240V\~50Hz

1. Front guard
2. Blade nut
3. Fan blade
4. Back guard fixing nut
5. Back guard
6. Motor shaft stem
7. Motor housing
8. Oscillation lock

9. Guard fixing screw

10. Control panel with push buttons

10a. Timer/temperature display

10b. Mode indicator (standard, natural, night, timer)

10c. Fan speed indicator (L - low, M - medium, H - high)
10d. Timer setting button
10e. Operating mode toggle button
10f. Fan speed shift button
10g. Switch
11. Telescopic fan stand
12. Fan stand's height locking screw
13. Fan base screw cap
14. Fan foot mounting screws
15. Fan feet

APPLIANCE ASSEMBLY AND DISASSEMBLY

1. Make sure the appliance is disconnected from the power source.
2. Assembly:
   a) Arrange the fan feet (15) on a flat surface so that they form a cross base
   b) Place the fan stand (11) on the cross base (15) and fasten it with screws (14)
   c) Install the cap (13) of the fan base screws on the stand, so that it covers the screws
   d) Adjust the height of the stand (11) and screw in the locking screw (12)
   e) Mount the motor housing (7) on the fan stand (11)
   f) Install the back guard (5) on the motor body (pay attention to the notches).
   g) Install the back guard mounting nut (4).
   h) Install the fan blade (3) paying attention to the notches in the stem (6) and in the blade centre opening.
   i) Tighten the the blade fixing nut (2)
   j) Install the front guard (1) by fitting its edge into the catches on the back guard. Then, secure it by tightening the guard fixing screw (9).
3. Disassembly:
   a) Perform the disassembly in the reverse order of the assembly procedure.

FAN OPERATION

1. To switch on the fan, press the switch ⏻.
2. Select the desired operating mode pressing:
3. standard – after selecting a blowing force, the fan will continue to operate this way, until it is switched off
4. natural◆ the fan will change the blowing force to simulate the sensation of breeze; the natural mode will adjust the blowing force, depending on the selected breeze intensity.
5. night – the fan will operate in the natural mode and reduce the blowing intensity after every 30 minutes, until reaching the lowest intensity of the natural mode
6. To switch off the fan after a time delay, press the timer button ⏻. Each press increases the timer setting by one hour, until it returns to 0. To deactivate the timer, set the value to 0.
7. Display sleep mode. The fan will switch off the display 30 seconds after the last interaction. To reactivate the display, press any button.
8. To switch on the fan, press the switch button Ⓤ.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, make sure that the fan has been disconnected from the power source.

The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior should be blown out with compressed air or vacuumed with a vacuum cleaner.

Electromagnetic compatibility (EMC)

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their

respective owners. Specifications are subject to change without prior notice.

Enjoy it.