R5 Wireless - Headphones KLIPSCH - Free user manual and instructions

Product type	Over-ear wireless headphones (circum-aural)
Brand	Klipsch
Model	R5 Wireless
Dimensions (H x W x D)	20 x 15 x 8 cm
Weight	250 g
Power source	Rechargeable lithium-ion battery 400 mAh
Battery life	Up to 20 hours
Connectivity	Bluetooth 5.0
Main functions	Play/pause, volume control, call management, voice command
Care and cleaning	Wipe with a soft, dry cloth. Do not use chemical products.
Safety	Do not expose to moisture. Use at room temperature. Keep out of reach of children.
Spare parts and repairability	Replaceable ear pads and charging cable. Contact after-sales service.
General information	Foldable headphones, compatible with iOS and Android, USB-C cable included
Box contents	R5 Wireless headphones, USB-C cable, user manual

Frequently Asked Questions - R5 Wireless KLIPSCH

How to pair the R5 Wireless headphones with my phone?

Enable Bluetooth on your phone. On the headphones, press and hold the power button for 5 seconds until the LED flashes blue. Select Klipsch R5 Wireless from the list of devices.

What to do if the headphones do not turn on?

Check that the battery is not completely discharged. Plug in the USB-C cable and charge for at least 2 hours. If the problem persists, try another cable or contact support.

How to adjust volume on the headphones?

Use the + and - buttons on the right earpiece. A short press increases or decreases volume. A long press allows skipping to the next or previous track.

The headphones disconnect frequently, what to do?

Make sure the battery is sufficiently charged. Keep the headphones away from interference (Wi-Fi, microwaves). Reset the pairing by deleting the headphones from your phone and re-pairing.

How to clean the headphones ear pads?

Remove the ear pads if possible. Wipe them with a slightly damp cloth and air dry. Never use harsh detergents.

Can I use the headphones while charging?

Yes, you can use the headphones in wired mode via the USB-C cable. However, wireless use during charging is not recommended as it may reduce battery life.

How to make a call with the headphones?

During an incoming call, press the multi-function button once to answer. To hang up, press again. To reject a call, press and hold the button for 2 seconds.

What does the red flashing LED mean?

A flashing red LED indicates low battery. Charge the headphones as soon as possible. A steady red LED while charging means the battery is charging.

How to reset the headphones to factory settings?

Press and hold the + and - buttons simultaneously for 10 seconds. The LED will flash red and blue, then turn off. The headphones are then reset.

Where can I find replacement parts for the R5 Wireless?

Visit the official Klipsch website or contact customer service. Replacement ear pads and USB-C cables are available.

USER MANUAL R5 Wireless KLIPSCH

Klipsch REFERENCE

R5 WIRELESS OWNER'S MANUAL

CONTENU • CONTENIDO • INHALT • CONTENUTO • CONTEÚDO • 目录

CONTRÔLES • CONTROLES • STEUERUNG • CONTROLLI • CONTROLES • 控制

graph LR
    A["CHARGING JACK"] --> B["STATUS INDICATOR"]
    B --> C["+"]
    C --> D["+"]
    D --> E["+"]
    E --> F["+"]
    F --> G["+"]
    G --> H["+"]
    H --> I["+"]
    I --> J["+"]
    J --> K["+"]
    K --> L["+"]
    L --> M["+"]
    M --> N["+"]
    N --> O["+"]
    O --> P["+"]
    P --> Q["+"]
    Q --> R["+"]
    R --> S["+"]
    S --> T["+"]
    T --> U["+"]
    U --> V["+"]
    V --> W["+"]
    W --> X["+"]
    X --> Y["+"]
    Y --> Z["+"]
    Z --> AA["+"]
    AA --> AB["+"]
    AB --> AC["+"]
    AC --> AD["+"]
    AD --> AE["+"]
    AE --> AF["+"]
    AF --> AG["+"]
    AG --> AH["+"]
    AH --> AI["+"]
    AI --> AJ["+"]
    AJ --> AK["+"]
    AK --> AL["+"]
    AL --> AM["+"]
    AM --> AN["+"]
    AN --> AO["+"]
    AO --> AP["+"]
    AP --> AQ["+"]
    AQ --> AR["+"]
    AR --> AS["+"]
    AS --> AT["+"]
    AT --> AU["+"]
    AU --> AV["+"]
    AV --> AW["+"]
    AW --> AX["+"]
    AX --> AY["+"]
    AY --> AZ["+"]
    AZ --> BA["+"]
    BA --> BB["+"]
    BB --> BC["+"]
    BC --> BD["+"]
    BD --> BE["+"]
    BE --> BF["+"]
    BF --> BG["+"]
    BG --> BH["+"]
    BH --> BI["+"]
    BI --> BJ["+"]
    BJ --> BK["+"]
    BK --> BL["+"]
    BL --> BM["+"]
    BM --> BN["+"]
    BN --> BO["+"]
    BO --> BP["+"]
    BP --> BQ["+"]
    BQ --> BR["+"]
    BR --> BS["+"]
    BS --> BT["+"]
    BT --> BU["+"]
    BU --> BV["+"]
    BV --> BW["+"]
    BW --> BX["+"]
    BX --> BY["+"]
    BY --> BZ["+"]

STATUS INDICATOR • Indicateur d'état • Indicador de estado • Statusanzeige • Indicatore di stato • Indicador de status • 状态指示灯

CHARGING JACK • Prise de chargement • Conector de carga • Ladestecker • Connettore di carica • Tomada de carregamento • 充电插孔

*HOLD 2 SECONDS • Appuyer pendant 2 secondes • Mantenga oprimido durante 2 segundos • Stummschaltung 2 Sekunden gedrückt halten • Tenere premuto per 2 secondi • Manter pressionado por 2 segundos • 保持 2 秒

**HOLD 5 SECONDS • Appuyer pendant 5 secondes • Mantenga oprimido durante 5 segundos • Stummschaltung 5 Sekunden gedrückt halten • Tenere premuto per 5 secondi • Manter pressionado por 5 segundos • 保持 5 秒

1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all these instructions.
5. DO NOT use this apparatus near water or moisture.
6. If you hear ringing or experience pain or discomfort in your ears during or after using any in-ear audio product, that is a sign you are listening too loud.
   When your ears are exposed to high volumes (in excess of 85dB) for over an hour, you may be permanently damaging your hearing.
7. TURN DOWN your listening device's volume to zero before you insert the Klipsch headphones and turn on the device. Once you have the headphones on, gradually increase the volume to a comfortable, moderate volume.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. ONLY USE attachments/accessories specified by the manufacturer.

10. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11. NEVER operate a motor vehicle while listening to or wearing your headphones. Not only dangerous, it is illegal in many places.

12. NEVER operate heavy machinery while listening to or wearing your headphones.
13. We don't recommend you use the headphones while riding a bicycle, running, or walking in heavy traffic areas.

WARNING:

Except in case of emergency, Klipsch recommends you do not use these headphones or headsets (headphones plus microphone) as aviation communication equipment as they are not engineered for many environmental conditions common in commercial or non-commercial aircraft (including, but not limited to: altitude, temperature, noise conditions, unpressurized aircraft, etc.) resulting in possible interference to critical communications.

The Occupational Safety Health Administration (OSHA) has issued headphone usage recommendations for maximum daily exposure and sound pressure levels (measured in decibels (dB)). A decibel is a unit of measure of sound, and decibels increase exponentially as sound gets louder. For example, conversational speech is typically around 60dB, and a rock concert in a stadium is often about 110dB.

OSHA GUIDELINES FOR NOISE EXPOSURE LIMITS

Sound Pressure Level	Recommended Maximum Exposure Per Day
90dB 8 Hours
92dB 6 Hours
95dB 4 Hours
97dB 3 Hours
100dB 2 Hours
102dB 1.5 Hours
105dB 1 Hours
110dB 30 Minutes
115dB 15 Minutes or less
120dB Avoid as damage may occur

EU COMPLIANCE INFORMATION

Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC Directive 2014/53/EU; European Union RoHS Directive 2011/65/EU; European Union WEEE Directive 2002/96/EC; European Union Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Directive 1907/2006.

Symbol of a trash bin with crossed lines indicating no waste or restriction (no text or numbers present)

WEEE NOTICE

Note: This mark applies only to countries within the European Union (EU) and Norway.

This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

FCC AND CANADA EMC COMPLIANCE INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Approved under the verification provision of FCC Part 15 as a Class B Digital Device.

Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device.

Caution: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC rules, this device is to comply with Class B limits. all peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables my result in interference to radio or reception.

This Class B digital apparatus complies with Canadian ICES-003.

WIRELESS TRANSMITTER COMPLIANCE INFORMATION

This device complies with ISEDC licence-exempt RSS standard (s) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

PRODUCT REGISTRATION

Register your product online at www.klipsch.com/register

• Klipsch will keep you up-to-date on new products and promotions.
• Your personal information will never be resold.
• This registration information is not used for warranty purposes. Please retain your receipt for warranty claims.

GETTING STARTED

1. Turn on the headset by pressing the Power/Pair button for 5 seconds. The headset will automatically go to pairing mode and the status indicator will begin pulsing BLUE.
2. Connect to "Klipsch R5 Wireless" from your device.
3. Once connected, the headset will periodically blink BLUE.

Note: The headset will automatically pair to the last device connected to it when turned on.

TURNING OFF

Press the Power/Pair button for 5 seconds to turn the headset off.

CHARGING

Use the included Micro-USB cable to charge the headset from your computer or USB wall adapter (not included). The status indicator will glow RED until the headset is charged, at which point it will turn off.

ADDITIONAL FEATURES

1. You can mute the microphone by pressing and holding "Volume Up" and "Volume Down" simultaneously during a call.
2. You can access voice control by double pressing Play/Pause.
3. You can reject a second incoming call by pressing and holding Play/Pause.

SPECIFICATIONS

Bluetooth ^® 4.0

A2DP Codecs: SBC, AAC, aptX®

Range: up to 10m (33 feet)

Input rating: 5V DC, 0.5A

STATUS INDICATOR

PAIRING
FEATURE	LED COLOR
Standby Red
Discoverable	Blue
Connected Blue
CHARGING
FEATURE	LED COLOR
Charging Red
Fully Charged	Red
USE
FEATURE	LED COLOR
Low Battery	Red
Incoming Call	Blue

LED INDICATOR

Pure electrical circuit lines without any symbols

Double Flashing

Simple wavy line diagram with no text or symbols

Slowly Pulsing

Pure electrical circuit lines without any symbols

Flashing

LED INDICATOR

On

Off

LED INDICATOR

Pure electrical circuit lines without any symbols

Slowly Flashing

Pure zigzag line pattern without any text, numbers, or symbols

Pulsing

ENGLISH - WARRANTY - U.S.

Klipsch Group, Inc, (KGI) warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one (1) year from the date of purchase, if it is properly used and maintained. If this product proves defective in either material or workmanship, KGI, at its option, will (a) repair the product, or (b) replace the product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, KGI at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. KGI assumes no responsibility or liability for such modification. To obtain a repair or replacement under the terms of this warranty, please return to dealer first, if possible, and the dealer will direct you accordingly for repairs or replacement. You will be required to submit a copy of the original receipt.

Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.

Limitations:

• This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with KGI's instructions.
• This limited warranty is null and void for products with altered

or missing serial numbers and for products not purchased from an authorized dealer.

- This limited warranty terminates if you sell or otherwise transfer this product to another party.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO COUNTRY. KGI'S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. KGI DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KGI MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY OUTSIDE THE U.S.

The Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States. To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the distributor that supplied this product.

INFORMATIONS DE CONFORMITÉ UE

Symbol of a trash bin with no text or numbers present

AVIS DEEE

INFORMATIONS DE CONFORMITÉ FCC ET CEM CANADA REMARQUE

Pure electrical circuit lines without any symbols

Double Clignotant

Simple wavy line diagram with no text or symbols

Lentement Impulsion

Pure electrical circuit lines without any symbols

Clignotant

INDICATEUR DEL

Sous tension

Hors tension

INDICATEUR DEL

Pure electrical circuit lines without any symbols

Symbol of a trash bin with crossed lines indicating no waste or restriction (no text or labels)

AVISO DE LA DEEE

Alcance: Hasta 10 m (33 pies)

Voltaje nominal de entrada: 5 V CC, 0.5 A

INDICADOR DE ESTADO

Pure electrical circuit lines without any symbols

Doble Destello

Simple wavy line diagram with no text or symbols

Despacio Legumbres

Pure electrical circuit lines without any symbols

Destello

INDICADOR LED

Encendido

Apagado

INDICADOR LED

Pure electrical circuit lines without any symbols

Despacio Destello

Pure zigzag line pattern without any text, numbers, or symbols

Legumbres

Simple line drawing of a trash bin with crossed x- and y-axes, no text or symbols present.

WEEE-HINWEIS

Pure electrical circuit lines without any symbols

Doppelt Blinkt

Simple wavy line diagram with no text or symbols

Langsam Impuls

Pure electrical circuit lines without any symbols

Blinkt

LED-ANZEIGE

Ein

Aus

LED-ANZEIGE

Pure electrical circuit lines without any symbols

Langsam Blinkt

Pure zigzag line pattern without any text, numbers, or symbols

Impuls

GERMAN - GARANTIE - USA

Symbol of a trash bin with crossed lines indicating no waste or restriction (no text or labels)

Pure electrical circuit lines without any symbols

Simple wavy line diagram with no text or symbols

Lentamente Pulso

Pure electrical circuit lines without any symbols

Lampeggiante

INDICATORE LED

Acceso

Spento

INDICATORE LED

Pure electrical circuit lines without any symbols

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)

Pure electrical circuit lines without any symbols

Duplo Intermitente

Simple wavy line diagram with no text or symbols

Lentamente Pulsando

Pure electrical circuit lines without any symbols

Intermitente

INDICADOR LED

Ligar

Desligar

INDICADOR LED

Pure electrical circuit lines without any symbols

Lentamente Intermitente

Pure zigzag line pattern without any text, numbers, or symbols

Pulsando

Symbol of a trash bin crossed with no text or labels

WEEE 注意事项

Pure electrical circuit lines without any symbols

双闪烁

Simple wavy line diagram with no text or symbols

缓脉动

Pure electrical circuit lines without any symbols

闪烁

LED 指示灯

开

关

LED 指示灯

Pure electrical circuit lines without any symbols

缓闪烁

Pure zigzag line pattern without any text, numbers, or symbols

脉动

CHINESE - 保修条例 - 美国

Symbol of a trash bin with crossed lines indicating no waste or restriction (no text or numbers present)

Pure electrical circuit lines without any symbols

مزدوج وميض

Simple wavy line diagram with no text or symbols

نبيض نبيض

Pure electrical circuit lines without any symbols

وميش

مؤشر الحالة LED

على

اب timestamp

مؤشر حالة LED

Pure electrical circuit lines without any symbols

نبيض وميض

Pure zigzag line pattern without any text, numbers, or symbols

نبيض

KEEPERS OF THE SOUND

KLIPSCH.COM

3502 Woodview Trace • Indianapolis, IN 46268 • 1-800-KLIPSCH Designed and engineered in Indianapolis, IN by Klipsch, US

©2018, Klipsch Group, Inc. is a wholly-owned subsidiary of Voxx International Corporation. Klipsch and Keepers of the Sound are trademarks of Klipsch Group Inc., registered in the U.S. and other countries. Product of China.

V01 - 180829