V977 - Thermometer Vicks - Free user manual and instructions

Product Type	Infrared Forehead Thermometer
Brand	Vicks
Model	V977
Color	White and Blue
Dimensions	Approx. 15.5 x 3.5 x 4 cm (6.1 x 1.4 x 1.6 in)
Weight	Approx. 90 g (3.2 oz) with batteries
Power Source	2 x AAA alkaline batteries (1.5V)
Measurement Range	34.0°C – 42.2°C (93.2°F – 108°F)
Accuracy	±0.2°C (±0.4°F) in clinical range (37.0°C – 39.0°C)
Display	LCD with blue backlight
Memory	Last 25 readings
Auto-Off	After 10 seconds of inactivity
Measurement Mode	Forehead (non-contact)
Units	Celsius / Fahrenheit switchable
Cleaning Instructions	Wipe the lens and body with a soft cloth dampened with 70% isopropyl alcohol. Do not submerge in water.
Safety Precautions	Keep out of reach of children under 6 years. Do not use on open wounds or near water. Stop use if skin irritation occurs.
Reparability	Battery compartment is user-replaceable. No other user-serviceable parts. Contact Vicks customer service for any issues.
Certifications	CE, FDA registered
Package Contents	Thermometer, 2 x AAA batteries, instruction manual

Frequently Asked Questions - V977 Vicks

How do I use the Vicks V977 thermometer?

Place the thermometer probe at the center of the forehead, about 2-3 cm away. Press the button and wait for the reading. Ensure the forehead is clean and dry. See the manual for detailed instructions.

How accurate is the Vicks V977?

The Vicks V977 has an accuracy of ±0.2°C (±0.4°F) in the clinical range of 37.0°C–39.0°C. For best results, follow the usage guidelines and avoid external factors like sweat or direct sunlight.

How do I change the batteries?

Open the battery compartment on the back, remove old batteries, and insert two new AAA alkaline batteries ensuring correct polarity. Close the cover securely.

How do I clean the thermometer?

Use a soft cloth slightly dampened with 70% isopropyl alcohol to wipe the lens and body. Do not submerge the device in water or use abrasive cleaners.

Can it be used on a baby?

Yes, the Vicks V977 is suitable for infants and children. However, for precise readings, ensure the baby's forehead is clean and they are calm. Do not use if the baby has been sweating or under a blanket recently.

Why does the thermometer show ‘Lo’ or ‘Hi’?

‘Lo’ indicates the temperature is below 34.0°C (93.2°F) – move the thermometer closer or ensure correct positioning. ‘Hi’ means above 42.2°C (108°F) – retry in a cooler environment or check for errors.

How do I switch between Celsius and Fahrenheit?

With the thermometer turned off, press and hold the button for about 3 seconds until the unit changes. Release the button and turn it on again to confirm.

What is the warranty period?

The Vicks V977 comes with a limited 2-year warranty against manufacturing defects. Keep your purchase receipt for proof.

Can I measure ear temperature with this model?

No, the V977 is a forehead thermometer designed for non-contact measurement on the forehead. It is not suitable for ear or oral use.

Why does the reading vary each time?

Variations can occur due to positioning, distance, or environmental factors. Ensure the probe is clean, the forehead is dry, and the device is at room temperature. Wait at least 30 seconds between measurements.

USER MANUAL V977 Vicks

• Pull plastic strip under battery cover.
• Remove 98.6°F label from display.

1 Turn On

Remove protective scanner cap.

Press and release power button.

Wait for beep and flashing °F.

2 Scan

Simple line drawing of a human face with two hand gestures, no text or symbols present

Move hair away from forehead and place scanner in the center of the forehead.

Press and release power button and scan forehead slowly from the center of the forehead to the temple - wait for confirmation beep.

3 Repeat

Repeat measurement if necessary - wait for flashing °F and repeat step 2.

PLEASE NOTE: The unit reads an “oral” equivalent temperature. Add 1°F to get a rectal equivalent. Take 3 measurements if readings appear low.

Some Helpful Guidelines For Best Results When Using the Forehead Thermometer

- Call your doctor when your child has diarrhea, vomiting or changes in appetite, lethargy (sluggishness) or is unusually sleepy.

- It is important to know each individual's Normal temperature when they are well. This is the only way to accurately diagnose a fever. Take multiple readings when healthy to determine Normal temperature.

- A child's normal temperature can be as high as 99.9°F or as low as 97.0°F. Re-measure with a standard digital thermometer for confirmation, especially on infants (It is recommended use a digital thermometer rectally on infants and on sleeping infants if there is a question about the measurement. Be sure to note this unit reads 1°F lower than a rectal digital measurement).

Forehead Thermometer

Instruction Manual

Thank you for purchasing the Vicks Forehead Thermometer (V977).

The Forehead Thermometer is a high quality product incorporating the latest technology and tested in accordance with international standards. With its unique technology, the Forehead Thermometer can provide a stable, heat-interference-free reading with each measurement.

The instrument performs a self-test every time it is switched on to always guarantee the accuracy of measurements. The Forehead Thermometer is intended for the monitoring of human body temperature in the home. It is intended for use on people of all ages.

Please read these instructions carefully before using this instrument and keep the instructions and the thermometer in a safe place.

Table of Contents

1. The Advantages of your Forehead Thermometer
2. Important Safety Instructions
3. Product Description
4. How the Forehead Thermometer Measures Body Temperature
5. Control Displays and Symbols
6. Directions for Use
7. Error Messages
8. How to recall 12 readings in the memory mode
9. Cleaning and Storage
10. Replacing the Battery
11. Warranty
12. Technical Specifications

1. The Advantages of your Forehead Thermometer

Measurement in 3 seconds

The innovative infrared technology allows measurement of forehead temperature in only 3 seconds.

Accurate and reliable

Due to the unique probe assembly construction, the advanced infrared sensor, and the complete calibration process this unit can offer a very accurate and reliable temperature measurement comparable to one taken from the oral site with a regular digital thermometer.

Gentle and Easy to Use

• The Forehead Thermometer is non-invasive. A measurement can be taken even while a child is sleeping.
• Design is easy to hold and use.
• The Forehead Thermometer is less threatening to a child than a rectal thermometer and easier to use than other methods.

Auto-Display Memory

The last reading is automatically displayed for 3 seconds when the unit is switched ON.

Multiple Reading Recalls

Users can recall the last 12 readings when entering the MemoryTracker™ recall mode, enabling efficient tracking of temperature history and variations.

Safe and Hygienic

• No risk of broken glass or mercury ingestion.
  • Completely safe for use on children.

Fever InSight™ Feature

Fever InSight helps you to better understand the meaning of your child's temperature with the colour indicated on the display. The screen displays Green if no fever, Yellow when the temperature is slightly elevated and a Red alert for fever. 10 audible beeps indicate temperatures + 99.5°F alert that the patient may have a fever.

Color Range (°F) Meaning
Green 97.0-99.5 Acceptable
Yellow 99.6-100.8 Elevated
Red 100.9+ Possible High Fever

2. Important Safety Instructions

• Never use the thermometer for purposes other than those it has been intended for. Please follow the general safety precautions when using on children.
• Never immerse the Forehead Thermometer into water or other liquids (not waterproof). For cleaning and disinfecting please follow the instructions in the "Cleaning and Storage" section.
• Keep the instrument away from direct exposure to the sun and keep it in a dust-free, dry area at the temperature between 60.8°-104°F.
• Do not use the thermometer if there are signs of damage on the measuring sensor or on the instrument itself. If damaged, do not attempt to repair the instrument! Please contact our Consumer Relations Department at: 1-800-477-0457.

- This Forehead Thermometer consists of high-quality precision parts. Do not drop the instrument. Protect it from severe impact and shock. Do not twist the instrument or the measuring sensor.

WARNING:

• Use of this Forehead Thermometer is not intended as a substitute for consultation with your physician or pediatrician.
  • Thermometer is not waterproof! Please NEVER immerse into liquids!

3. Product Description

(1) Power Button
(2) Scanner
(3) LCD Display
(4) Memory Button
(5) Battery Cover
(6) Protective Scanner Cap

4. How the Forehead Thermometer Measures Body Temperature

The Forehead Thermometer measures infrared energy radiated from the skin above of the eyebrow area and the surrounding tissue. This energy is collected through the lens and converted to a temperature value. Temperature readings obtained by scanning above the eyebrow area will provide the greatest accuracy.

The Forehead Thermometer has been clinically tested and proven to be safe and accurate when used in accordance with its operating instruction manual.

5. Control Displays and Symbols

LCD Display Display	Meaning Description
	Self check ensures proper functioning	Press the On/Off button to run on the unit, all segments will be shown for 2 seconds.
	Recall of last reading The	last reading will be shown on the display automatically for 3 seconds.
	Ready to measure The unit is ready for the measurement, the °F icon will keep flashing.
	Measurement complete The	reading will be shown on the LCD display with the °F icon flashing, the unit is ready again for the next measurement.
	Low battery indication When the unit is turned on, the battery icon will keep flashing to remind the user to replace the batteries.

6. Directions for Use

1. Press the Power button on front of unit. The LCD is activated to show all segments for 2 seconds.

2. The last measurement reading will be shown on the display automatically for 3 seconds with the «M» icon.

3. When the °F icon is flashing, a beep sound is heard and the thermometer is ready for the measurement.

4. Place the probe gently and flush onto the area approximately 1/2 inch above the center of the eyebrow. If the eyebrow area is covered with hair, sweat or dirt, please clean the area beforehand to improve the reading accuracy.

5. Press the Power button once and release it. Start to move the instrument steadily from 1/2 inch above the center of the eyebrow to 1/2 inch above the tail of the eyebrow area and back up again. A long beep will sound after 3 seconds to signal measurement complete. If the probe movement is too slow to reach the tail of the eyebrow before the long beep sound is heard, repeat the measurement as above from step 4, and move the probe a little quicker this time.

6. Read the recorded temperature from the LCD display.

(1)

(2)

(3)

(4)

(5)

(6)

To avoid an inaccurate measurement, note the following:

• Patients should stay in steady - state room condition for at least 30 minutes.
- Don't remove the measurement device from the measuring area before hearing the final beep.
- Don't take a measurement while or immediately after nursing a baby.
- Don't use the forehead thermometer in high humidity environments.
• Patients should not drink, eat, or be physically active before/while taking the measurement.
- Before placing the thermometer sensor onto the measurement area, remove dirt, hair, or sweat.
- Use an alcohol swab to carefully clean the sensor and wait for 5 minutes before taking a measurement on another patient.
- Always take the temperature in the same location, since the temperature readings may vary from different locations.

- In the following situations it is recommended that three temperatures in the same location be taken and the highest one taken as the reading:

1) Newborn infants in the first 100 days.
2) Children under three years of age with a compromised immune system and for whom the presence or absence of fever is critical.
3) When the user is learning how to use the thermometer for the first time until he/she has familiarized himself/herself with the instrument and obtains consistent readings.

1. Error Messages

Display / Problem	Display Meaning Possible cause and remedy
	Measured temperature too highCAUTION: High fever requires immediate medical attention!	Displays «H» when measured temperature higher than 108.0 °F.
	Measured temperature too low Displays «L» when measured temperature lower than 93.2 °F.
	Room temperature too high Displays «H» in conjunction with the «S» when room temperature is higher than 104.0°F.
	Room temperature too low Displays «L» in conjunction with the «t» when room temperature is lower than 60.8 °F.
	Error function display When system has a malfunction.
	Blank display Please check if the battery has been loaded correctly. Also check polarity (<+> and <->) of batteries.
	Dead battery indication If the steady battery icon is the only symbol shown on the display, the battery should be replaced immediately.

Use the following steps to recall the last 12 temperature measurements.

Display Display Meaning Description
		Recall Mode Press the	button to enter Recall Mode when power is off. The memory icon «M» flashes.
		Reading 1 (the last reading)	Press and release the button to recall the last reading. The number 1 will appear showing the last saved reading.
		Reading 2 (the second latest reading)	Press and release the button to recall the second latest reading.
		Reading 12 (the last reading)	Press and release the button consecutively to recall readings in succession, up to the last 12 readings.

Pressing and releasing the Power 📂 button after the last 12 readings have been recalled will resume the above sequence from reading 1.

9. Cleaning and Storage

Use an alcohol swab or cotton swab moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring probe. Ensure that no liquid enters the interior of the thermometer. Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the instrument in water or other cleaning liquids. Take care not to scratch the surface of the LCD by replacing the protective cap after use.

Diagram of a medical procedure showing a hand holding a tool near a circular target (no text or labels)

10. Replacing the Battery

The Forehead Thermometer is supplied with 2 AAA batteries. Replace with 2 new AAA batteries when the flashing battery symbol appears on the LCD display. To change the batteries, slide open the battery cover as shown and remove batteries. Replace the batteries being sure to align properly as indicated inside the battery compartment.

Remove the battery from the instrument if it is not required for extended periods of time in order to avoid damage to the thermometer resulting from a leaking battery.

Dispose of batteries according to local waste management directions.

Diagram showing two views of a remote control device with battery and switch components, no text or symbols present

11. Warranty

Your Forehead Thermometer is durable and manufactured for normal, household use. Following directions carefully will ensure years of dependable operation. If for any reason (other than misuse or normal battery replacement) you are dissatisfied with your Forehead Thermometer, we will repair or replace it, at our option, free during the three year warranty period. Modification to the product by the consumer is not authorized and voids the warranty.

If the thermometer does not function properly, first check the battery. Replace if necessary. If repair is necessary call our Consumer Relations Department at 1-800-477-0457 or write to Kaz Incorporated, Consumer Relations Department, 250 Turnpike Road, Southborough, MA 01772 USA, or e-mail [e-mail], explaining just how the thermometer is improperly working. Our consumer service representative will provide further instruction on how to correct the trouble yourself or will ask you to return the thermometer for repair or replacement.

12. Technical Specifications

Type: Forehead Thermometer V977
Measuring Range:	Forehead measuring range: 93.2°F to 108.0°F.
Resolution:	0.1°F
Accuracy:	Laboratory: ±0.4°F, 96.8 ~ 102.2°F(Ambient Temperature: 60.8°F to 104°F)
Display:	Liquid Crystal Display, 4 digits plus special icons
Acoustic:	a. The unit is turned ON and ready for the measurement: 1 short «beep» sound.b. Complete the measurement: 1 long beep sound.c. System error or malfunction: 3 short «beep» sounds.
Memory:	a. Auto-Display the last measured temperature when switched on.b. 12 readings recall in the Memory Mode.
Backlight	a. The display will be lighted for 4 seconds when the unit is turned ON.b. The display will be lighted again for 5 seconds when the measurement has been completed.
Operating temperature:	60.8°F to 104°F
Storage/transport temperature:	-4°F to 122°F
Automatic Switch-off:	Approx. 1 minute after last measurement has been taken
Battery:	(2) AAA Batteries - at least 1000 measurements
Weight:	3.51oz. (with battery), 2.72oz. (w/o battery)
Standards:	Complies with ASTM E-1965-98 requirements

íkaz

Manufacturing Quality Healthcare Products for Over 75 Years

Kaz, Incorporated • Hudson, NY 12534 • www.kaz.com

This product is manufactured by Kaz, Inc. under a license to the Vicks trademark. Vicks is a registered trademark of The Procter & Gamble Company, Cincinnati, Ohio, USA

©2008 KAZ, Incorporated

Made and printed in China