V925P - Thermometer Vicks - Free user manual and instructions
Find the device manual for free V925P Vicks in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Thermometer |
| Model | V925P |
| Brand | Vicks |
| Measurement Type | Forehead (non-contact infrared) |
| Display | LCD screen with backlight |
| Measurement Range | 34.0°C - 42.2°C (93.2°F - 108.0°F) |
| Accuracy | ±0.2°C (±0.4°F) within 35.0°C-42.0°C |
| Measurement Time | Approximately 1 second |
| Power Source | 2 AAA batteries (1.5V each) |
| Battery Life | Up to 1 year under typical use |
| Auto Shut-off | Yes, after approx. 60 seconds of inactivity |
| Units Switchable | °C / °F |
| Memory | Stores last 25 readings |
| Dimensions (approx.) | 150 x 40 x 30 mm |
| Weight (with batteries) | Approx. 80 g |
| Operating Temperature | 10°C - 40°C (50°F - 104°F) |
| Cleaning | Wipe sensor with a soft, dry cloth; do not immerse in water |
| Safety | Medical device; keep away from children under 3 years; not for use on animals |
| Replaceable Parts | Batteries only |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - V925P Vicks
How do I switch between Celsius and Fahrenheit on the Vicks V925P?
While the device is off, press and hold the power button for about 5 seconds until the unit symbol changes. Release the button to set the preferred scale.
What type of batteries does the Vicks V925P require?
It requires 2 AAA alkaline batteries (1.5V each). Insert them with correct polarity as indicated in the battery compartment.
How do I clean the thermometer sensor?
Use a soft, dry cloth to gently wipe the sensor lens. Do not use abrasive cleaners or immerse the device in water.
Why does the thermometer show an error message?
An error message may appear if the sensor is dirty, the ambient temperature is out of range (10°C-40°C), or if the battery is low. Clean the sensor, move to a suitable environment, or replace the batteries.
Can I use the Vicks V925P on a child?
Yes, it is safe for children of all ages, including infants. Ensure the forehead is clean and dry before measurement. Keep the device out of reach of children when not in use.
How accurate is the Vicks V925P?
The thermometer has an accuracy of ±0.2°C (±0.4°F) over the range of 35.0°C to 42.0°C (95°F to 107.6°F). For best results, follow the measurement instructions and allow the device to stabilize to room temperature.
Does the Vicks V925P store previous readings?
Yes, it stores up to 25 previous readings. To access memory, press the memory button (if available) or refer to the manual for specific steps.
What does the 'Lo' or 'Hi' display mean?
'Lo' indicates the measured temperature is below 34.0°C (93.2°F), and 'Hi' indicates it is above 42.2°C (108.0°F). Ensure proper positioning and a clean sensor, then retake measurement.
How long does it take to get a reading?
The measurement takes approximately 1 second. Hold the thermometer 3-5 cm from the forehead, press the button, and wait for the beep.
Is the Vicks V925P waterproof?
No, it is not waterproof. Do not submerge in water. Clean only with a damp cloth and avoid contact with liquids.
User questions about V925P Vicks
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermometer in PDF format for free! Find your manual V925P - Vicks and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V925P by Vicks.
USER MANUAL V925P Vicks
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vicks
Model : V925P
Category : Thermometer