LP-3022 - Printer Utax - Free user manual and instructions

USER MANUAL LP-3022 Utax

Line drawing of a computer printer with ventilation slots and paper feed (no text or symbols)

Folio A4 B5 A5

Legal OficioII Letter

Line drawing of two hands exchanging a stack of papers (no text or symbols present)

Diagram showing a printer's internal structure being placed into a green plastic case, with an arrow indicating the process (no text or symbols present)

Diagram showing a hand inserting a component into a device, with an inset close-up of the component (no text or symbols present)

Illustration of hands using a tool to adjust or install a mechanical component, with no visible text or symbols.

Illustration of hands holding a laptop with a green screen, showing a magnified view of a small green object (no text or symbols present)

Diagram of a printer or printer with two views of the cover (no text or symbols present)

Illustration of a printer with a green cover being inserted, showing the printer's handle and base (no text or symbols present)

Diagram of a printer's internal structure showing base, top, and bottom layers with arrows indicating movement (no text or symbols)

Technical diagram showing a device's internal structure with labeled ports and directional arrows indicating movement or assembly.

Diagram showing a printer with a green insert and a prohibition symbol below it

Technical diagram showing a hand using a tool to adjust or install a mechanical component, with an inset close-up highlighting the component's detail.

Technical diagram showing installation of a mechanical component with a magnified inset highlighting the assembly process.

Line drawing of a hand inserting a small component into a device panel (no text or symbols)

Illustration of a computer setup with an open box and a close-up view showing a switch (no text or symbols present)

Technical line drawing of a mechanical device with internal components and a tool inserted (no text or symbols)

Reinigung

Technical line drawing of a mechanical component with internal parts and mounting holes (no text or symbols)

Druckeinheit

Line drawing of a mechanical component with wheels and housing (no text or symbols)

Tonerbehälter

Diagram showing hands operating a printer with a green cover and arrow indicating rotation or change

Illustration of a hand holding a green mechanical component with a double-headed arrow indicating compression (no text or symbols)

Line drawing of a wheeled cart with wheels and a green ramp, no text or symbols present

Illustration showing two steps of a printer's internal processing: top view with hand holding a green circuit board, bottom view with hands inserting a green component into a printer (no text or symbols present)

Two-step diagram showing hands operating a printer into a device, with arrows indicating the process (no text or symbols present)

Illustration of hands operating a green mechanical device with a black arrow indicating a component (no text or symbols present)

Technical line drawing of a mechanical housing component with a prohibition symbol (no text or labels present)

Diagram showing a device being inserted into a component, with an inset image highlighting the component's internal structure.

Illustration of hands operating a green mechanical presser with arrows indicating process flow (no text or symbols)

Diagram illustrating a printer press operation with labeled parts and directional arrows indicating assembly steps.

Illustration of hands inserting a device into a rack with a green arrow indicating motion (no text or symbols)

Illustration of hands inserting a green card into a printer (no text or symbols visible)

Diagram illustrating a printer press operation with downward arrows indicating press direction and a prohibition sign.

Two-step diagram showing hands installing or adjusting a green component inside a printer case (no text or symbols present)

Diagram of a printer's internal structure showing hands operating the printer (no text or symbols present)

Diagram of a printer internal structure with a hand inserting a component (no text or symbols visible)

Illustration of a printer presser with a hand pressing a green paper (no text or symbols visible)

Diagram of hands operating a printer with arrows indicating process flow (no text or symbols)

Illustration of hands holding a green card under a printer (no text or symbols visible)

Illustration of a computer with a hand inserting a green card into a rack (no text or symbols visible)

Diagram showing a printer being placed into a green plastic case, with an arrow indicating the process (no text or symbols present)

Line drawing of a toaster oven with a hand inserting a button to the front panel (no text or symbols)

Line drawing of a printer with a hand pressing a button (no text or symbols)

Two-step diagram showing hands installing or adjusting a green component inside a computer case (no text or symbols present)

Diagram of hands operating a green printer in a mechanical assembly (no text or symbols visible)

Diagram of a printer's internal structure showing a hand inserting a green component into a green paper holder (no text or symbols present)

Illustration of a printer's internal structure with a hand pressing a green paper (no text or symbols)

Diagram of hands operating a printer with arrows indicating process flow (no text or symbols present)

Diagram of a computer monitor with a screwdriver inserted, showing the cable being inserted (no text or symbols present)

Illustration showing two steps of inserting a green card into a computer drive (no text or symbols present)

Diagram of a computer chassis showing internal components and ventilation slots (no text or labels)

Diagram of a computer motherboard showing internal components and ventilation slots (no text or labels)

Technical line drawing of a computer chassis showing internal components and ventilation slots (no text or labels)

Diagram of a computer monitor with scroll wheel and directional arrows indicating motion (no text or symbols)

Diagram of a computer setup with two rollers and a green device inside, showing directional arrows (no text or symbols)

Diagram of a computer interface showing an open panel with a green screen and directional arrows, enclosed in an inset view (no text or symbols present)

Diagram of a computer monitor with scroll wheel and directional arrows indicating motion (no text or symbols)

Diagram of a computer setup showing an internal device connected to two cylindrical rollers with directional arrows indicating rotation (no text or symbols present)

Network Tool for Clients 2

M

Materialstau 2

Ausgabefach 23

Duplexeinheit 24, 26

Hintere Abdeckung 23

Kassette 23

Universalzufuhr 24

IBM Program License Agreement

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PROGRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term “Programs” means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1 use, copy, modify, merge, or transfer copies of the Program except as provided in this license;
2 reverse assemble or reverse compile the Program; or
3 sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided "AS IS."

THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

3. Limitation of Remedies

IBM's entire liability under this license is the following;

For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of:

1 the equivalent of U.S. \$25,000 in your local currency; or

2 IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.

Monotype Imaging License Agreement

1 "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Agfa Japan. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging KK. Monotype Imaging KK retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging KK, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging KK if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging KK. When this License expires or is terminated, you shall either return to Monotype Imaging KK or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging KK warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging KK-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging KK does not warrant that the Software is free from all bugs, errors and omissions.

8 THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED.
9 Your exclusive remedy and the sole liability of Monotype Imaging KK in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging KK.
10 IN NO EVENT WILL MONOTYPE IMAGING KK BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.
11 New York, U.S.A. law governs this Agreement.
12 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging KK.
13 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.