3 Shelf Floor Lamp 51032 - Floor lamp Easy Home - Free user manual and instructions
Find the device manual for free 3 Shelf Floor Lamp 51032 Easy Home in PDF.
| Product Type | Floor lamp with 3 shelves |
| Model Number | 51032 |
| Brand | Easy Home |
| Overall Height | Approx. 70.5 inches (179 cm) |
| Shelves Dimensions | Each shelf: 15.75 x 11.8 inches (40 x 30 cm) |
| Base Diameter | 12.6 inches (32 cm) |
| Material | Metal frame with wooden shelves |
| Light Socket Type | E26 (standard medium base) |
| Max Bulb Wattage | 60W incandescent or equivalent LED |
| Bulb Included | No |
| Power Cord Length | 6 ft (1.8 m) |
| Switch Type | On/Off foot switch |
| Assembly Required | Yes (tools included) |
| Weight | Approx. 8.8 lbs (4 kg) |
| Recommended Bulb Type | LED or CFL for energy efficiency |
| Cleaning Instructions | Wipe with dry cloth; avoid abrasive cleaners |
| Safety Rating | UL/ETL certified (typical) |
| Warranty | 1 year limited |
Frequently Asked Questions - 3 Shelf Floor Lamp 51032 Easy Home
User questions about 3 Shelf Floor Lamp 51032 Easy Home
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Floor lamp in PDF format for free! Find your manual 3 Shelf Floor Lamp 51032 - Easy Home and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3 Shelf Floor Lamp 51032 by Easy Home.
USER MANUAL 3 Shelf Floor Lamp 51032 Easy Home
English... 3
Español...9
Contents
Tools 4
Contents......4
Assembly....5
Safety 8
Warranty card....15
Warranty information....16
TOOLS YOU WILL NEED:
1- Phillips head screwdriver

CONTENTS:
Screw (8) | [ABC]Threaded pipe (12) | Socket board (1) |
Thick board (1) | Thin board (2) | Plastic frame (1) |
Cushions (4) | Long poles (12) | Short poles (4) |
Plastic covers (4) | Clips (3) | Shade panels (4) |
Light bulb (1) | ||
ASSEMBLY INSTRUCTIONS:
Remove all packing from around the lamp and identify each part to make sure you have everything ready for installation. Lay out each part on a clean, flat surface, such as a table or carpet.
- Begin assembling the lamp at the bottom and then proceed upward towards the lamp shade. First, install 4 long poles (H) onto the corners of the thick board (D) using 4 screws (A). Tighten each screw using a Phillips head screwdriver and make sure the long poles are aligned correctly to each corner of the thick board after you are done tightening. Next, cover the screw holes on the bottom of the thick board using the 4 cushions provided (G). Diagram (1)

- Screw threaded pipe (B) halfway into the top of each long pole. Place one of the thin boards (E) through the threaded pipe on top of the long poles that you just attached to the thick board. Then tighten another 4 long poles on top of the thin board and make sure the corners of the poles are aligned with the corners of the thin board after tightening. Then place another thin board through the threaded pipes (B) on top of the second set of long poles. Diagram (2)
![graph TD A["Top Block"] --> B["B"] B --> C["Bottom Block"] C --> D["H"] D --> E["E"] E --> F["B"] F --> G["H"] G --> H["E"] H --> I["B"] I --> J["H"] J --> K["E"] K --> L["B"] style A fill:#f9f,stroke:#333 style C fill:#ccf,stroke:#333 style J fill:#cfc,stroke:#333](/content/2026/05/790296/images/8216917cfb04e76e95764aebde9f9bb345ed87f10080c481f6266bd2bb010009.jpg)

-
To install the light bulb socket, take socket board (C) and tighten the light bulb socket securely using the washer and butterfly nut. Then drop the pull chain directly through the hole provided. Screw in the light bulb provided (M) into the light bulb socket. Tighten the 4 short poles (I) on socket board (C), making sure all the corners are correctly aligned after tightening. Diagram (3)
-
Insert the 4 shade panels (L) into place. Once the shade panels are in place, install the plastic frame (F) on top of the (I) poles, using 4 screws (A) and tightening with a Phillips head screwdriver. Insert 4 plastic covers (J) over the holes on top of the plastic frame (F). Align the power cord down one side of the lamp. Attach the power cord to the poles using the included clips (K). Diagram (4)

SAFETY:
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
Contenido
Herramientas.... 10
Contenido.... 10
Ensamblaje....11
Seguridad 14
CONTENIDO:
ABC Tornillo (8) | Tubo roscado (12) | Tablero de conexión (1) |
DEF Tablero grueso (1) | Tablero fino (2) | Marco plástico (1) |
GHI Cojines (4) | Postes largos (12) | Postes cortos (4) |
Cubiertas de plástico (4) | Ganchos (3) | Pantallas (4) |
Bombillas (1) | ||
INSTRUCCIONES DE ENSAMBLAJE:
Date of purchase* ____
* We recommend you keep your receipt with this warranty card
Location of purchase*
Description of malfunction:

If you have a malfunction please contact our Customer Service department and send this completed warranty card with receipt to:
EuroCentra, Inc.
801 Circle Ave.
Forest Park, IL
60130
service@801service.net
| AFTER SALES SUPPORT | 51032 | |
| USA 866 558 8096service@801service.net | ||
| 09/2017 | ||
Hotline:
866-558-8096
Operating hours:
Monday - Friday,
10am - 6pm EST

YEAR WARRANTY
ALDI INC. FULL WARRANTY CONDITIONS
Dear Customer,
The ALDI warranty is a full warranty offering you the following benefits:
Warranty period: 2 years from date of purchase.
Costs: Free replacement product or refund at EuroCentra's discretion.
ADVICE:
Please contact our service hotline by phone or e-mail should you need to make a claim or if you have a question regarding this product.
In order to make a claim under the warranty, please send us:
- The original receipt and the properly completed warranty card.
The warranty does not cover damage caused by:
Accident or unanticipated events (such as lightning, water, fire etc.).
Improper use or transport.
Disregard of safety and maintenance instructions.
Other improper treatment or modification.
Commercial use.
The warranty is non-transferable and applies only to the original purchase and does not apply to subsequent owners of the product. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss, loss of profits, direct, indirect, special or consequential damage arising out of, or in connection with use of this product.
This warranty is only valid in the United States. This warranty gives you specific legal rights. However, you may have other rights that vary from state to state. Some states do not allow limitation on implied warranties or exclusion of consequential damages therefor these restrictions may not apply to you. Due to constant product development and market changes, EuroCentra, Inc. can only guarantee that replacements will be available within the two-year warranty period.

TARJETA DE GARANTÍA
LÁMPARA DE PISO CON 3 REPISAS
Sus datos:
Nombre:
Dirección:

Correo electrónico:
Fecha de la compra*
10 a.m. a 6 p.m. EST

CONDICIONES DE LA GARANTÍA
Estimado cliente:
Screw (8)
Socket board (1)
Thick board (1)
Thin board (2)
Plastic frame (1)
Cushions (4)
Long poles (12)
Short poles (4)
Plastic covers (4)
Clips (3)
Shade panels (4)
Light bulb (1)
ABC Tornillo (8)
Tubo roscado (12)
Tablero de conexión (1)
DEF Tablero grueso (1)
Tablero fino (2)
Marco plástico (1)
GHI Cojines (4)
Postes largos (12)
Postes cortos (4)
Cubiertas de plástico (4)
Ganchos (3)
Pantallas (4)
Bombillas (1)