WCL 1 - Refrigerator TEAM - Free user manual and instructions

Product type	Wide-angle conversion lens
Brand	Team
Model	WCL 1
Dimensions (diameter x length)	Approx. 65 mm x 25 mm
Weight	Approx. 50 g
Optical material	Glass with multi-layer coating
Filter diameter	52 mm
Main functions	Wide field of view, suitable for standard lenses
Care and cleaning	Clean with a dry microfiber cloth; avoid solvents
Safety	Avoid shocks and scratches; store in a case
Spare parts and repairability	Not user-repairable; contact a professional
General information	Designed for DSLR and mirrorless cameras

Frequently Asked Questions - WCL 1 TEAM

How to install the WCL 1 on my lens?

Screw the WCL 1 directly onto your lens's filter thread after removing the cap. Ensure the thread matches (52 mm).

Is the WCL 1 compatible with all lenses?

It is compatible with lenses having a 52 mm filter diameter and a focal length of at least 50 mm. For wider lenses, there is a risk of vignetting.

Does the WCL 1 affect image quality?

It may introduce slight barrel distortion and reduced sharpness at the edges. Use a medium aperture to optimize quality.

How to clean the WCL 1?

Use a dry, soft microfiber cloth in circular motions. For stubborn stains, slightly dampen the cloth with distilled water.

Can I use the WCL 1 with a lens hood?

Yes, if the hood has a 52 mm thread, you can screw it on after the WCL 1. However, watch out for vignetting.

Is the WCL 1 supplied with a case?

It is usually sold with a soft case to protect it from dust and scratches.

What is the conversion factor of the WCL 1?

The conversion factor is approximately 0.5x, which halves the focal length. For example, a 50 mm becomes 25 mm.

Can I stack multiple filters on the WCL 1?

It is not recommended to stack multiple filters as it may cause vignetting and reduce image quality.

How to avoid reflections when using the WCL 1?

Use a hood if possible and avoid pointing the lens at direct light sources. The multi-layer coatings help reduce reflections.

Where can I find spare parts for the WCL 1?

Since this accessory is not repairable, no spare parts are available. If damaged, replace it.

USER MANUAL WCL 1 TEAM

Weinkühler

Wine Cooler

Cave à vin

Wijnkoeler

Bodega

D

1 Temperature control knob
2 On/off switch for inner light
3 LED inner light
4 Fan opening
5 Rack
6 Feet
7 Condensation tray
8 Door hinge cover
9 Magnetic door seal
10 Smoked glass door
11 Door frame

FR

Please read these instructions carefully before using the appliance, and always follow the safety and operating instructions.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

☐ Check that your mains voltage corresponds to that stated on the appliance.
☐ Never leave the appliance unsupervised when in use.
☐ Only use the appliance in the way indicated in this instruction manual.
☐ Should you hand over the appliance to another user, make sure to hand over the instruction manual together with the appliance.
From time to time check the appliance for damages. If it is damaged, it should be repaired by a competent qualified electrician ^17 . Should the cord be damaged, it must be replaced by a competent qualified electrician ^18 .
☐ This beverage cooler is an electrical appliance. Therefore, do not operate it with wet hands, while standing on a wet surface or while standing in water.
☐ Never leave the appliance unsupervised when taking beverages out or putting them in the cooler. Keep out of reach of children or incompetent persons.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it. Keep the power cord away from sources of heat.
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ Never use the appliance near hot surfaces or in the sunlight.
□ Never use the appliance outside and always place it in a dry environment.
☐ Stand the appliance on a table or flat surface in order to avoid its fall. Ensure that there is at least a 5cm clearance at the sides and a 10cm clearance at the back of the cooler in order to allow adequate ventilation.
☐ Do not place any other object on top of the appliance.
☐ Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Plug the appliance directly into the power outlet, do not use any extension cord or multiple power socket.
☐ This cooler is designed to store wine bottles, however, if placing food inside, ensure that there is sufficient airflow between items.
☐ Do not place hot beverages into the appliance but let them cool down to room temperature beforehand.
☐ Close the cooler door immediately after putting in any items so the inside temperature will not rise dramatically.
☐ When positioned or if moving the appliance, ensure that it is not set horizontally or declined less than 45^ or turned upside down.
Should you notice any kind of damage on the appliance, please unplug it immediately and contact a competent qualified service ^* .
☐ All repairs should be made by a competent qualified service (*).
☐ Unplug the appliance before cleaning or when it is not in use.
(1) Competent qualified service: after-sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In case of need you should return the appliance to this service.

7 TEAM WCL 1 - 091214

TECHNICAL DATA

Volume 46 litres

Capacity 16 bottles with a height of maximum 32cm

Power 1 kWh/day (15°C)

Adjustable temperature 12°C - 18°C

Without CFC and low noise level (30dB)

NOTE: This equipment is not a usual refrigerator. The attainable cooling temperature lies maximally 15 degree below the ambient temperature. The equipment possesses factory-installed only 3 feet at the housing, the 4^th foot is attached at the door mounting plate.

OPERATION

• Make sure that your mains voltage corresponds to that stated on the appliance.
- Stand the appliance on a stable surface near a power socket.
- Plug in the appliance.
- Let the cooler operate for about one hour on *** (maximum cooling power).
- Then put the bottles on the racks. Set the desired cooling temperature with the temperature control knob. * corresponds to the minimum power, *** to the maximum power. Do not leave the door open for too long. After about 2 hours the beverages reach the set temperature.
- Make sure to use only bottles of the appropriate size (maximum 32 cm high, enough space between the bottles), in order to make sure that the door closes properly.
• Always unplug the appliance when it is not in use.

TROUBLESHOOTING

Symptoms	Possible cause	Solutions
The cooler does not work	- There is a power failure.- A house fuse has blown.	- Ensure the cooler is plugged in and the power socket is turned on.- Replace the broken fuse in your meter box.
The cooler is not reaching the desired temperature	- The cooler is placed too close to a heat source.- No sufficient ventilation.- The door is opened too frequently or for a long period of time.	- Keep the cooler away from sunshine or other heat sources.- Place the wine cooler in good ventilation and keep any items away from the fans.- Close the door tightly and do not open the door too frequently or for a long period of time.
Frost forming in the cooler	- Too much humidity. The ambient temperature is too low.	- Unplug to defrost, plug in again after the frost thaws.

CLEANING

• Unplug the appliance before cleaning it.
• Clean the appliance with a damp cloth or sponge.
  • Never use metal utensils or abrasive products to clean the appliance.
• Never immerse the appliance in water or any other liquid.

PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol — the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.

FR MODE D'EMPLOI

POUR VOTRE SECURITE

PROBLEMAS E SOLUÇÕES