MA406 - Alarm Clock Manta - Free user manual and instructions

Brand	Manta
Model	MA406
Product Type	Alarm Clock Radio
Dimensions (approx.)	15 cm × 10 cm × 8 cm
Weight (approx.)	400 g
Power Supply	AC 120V/60Hz (via included AC power cord)
Battery Backup	1 × 9V battery (not included) for clock and alarm retention during power failure
Radio Bands	FM 88–108 MHz, AM 540–1600 kHz
Preset Memory	10 AM + 10 FM stations
Alarm Modes	Alarm 1 (buzzer or radio), Alarm 2 (buzzer or radio)
Sleep Timer	10–90 minutes (adjustable in 10-minute increments)
Snooze Duration	9 minutes
Display	LED display showing time, frequency, and alarm icons
Speaker	Built-in speaker
Controls	AM/FM/ON/OFF, Hour/TU-, Min/TU+, Set/PRE/M+, AL1/Vol-, AL2/Vol+, Sleep/Snooze
Cleaning	Wipe with a dry cloth; do not use liquid cleaners
Safety	Keep away from water and moisture; unplug during storms or if unused for long periods
Spare Parts / Reparability	No user-serviceable parts inside; refer to qualified service personnel for repairs
General Information	User manual available in multiple languages; supports PDF download

Frequently Asked Questions - MA406 Manta

How do I set the time on my Manta MA406?

Press and hold the Set/PRE/M+ button until the clock display blinks. Then press Hour/TU- or Min/TU+ to adjust the hour and minute. Press Set/PRE/M+ again to confirm.

How do I set an alarm?

For Alarm 1: Press AL1/Vol- once for buzzer mode or twice for radio mode. The alarm time will flash. Use Hour/TU- and Min/TU+ to set the hour (minutes default to 00?). Press Set/PRE/M+ to confirm? (The manual does not specify a final confirmation, but the setting is saved after the display stops flashing.)

How do I turn on the radio?

Press AM/FM/ON/OFF once to turn on the radio. Press it again to switch between AM and FM bands. Adjust volume with AL1/Vol- (decrease) and AL2/Vol+ (increase). Tune frequency using Hour/TU- and Min/TU+.

How do I store radio presets?

With the radio on, select the desired band and tune to a station. Long press Set/PRE/M+ until the preset number flashes. Use Hour/TU- or Min/TU+ to choose a preset number (P1–P10). Press Set/PRE/M+ to store. Repeat for other stations.

How does the sleep timer work?

While the radio is on, press Sleep/Snooze repeatedly to cycle through sleep durations: 90, 80, 70,…, 10, OFF. The radio will automatically turn off after the set time.

How do I use the snooze feature?

When the alarm sounds, press Sleep/Snooze to temporarily stop it. The alarm will resume after 9 minutes. The alarm icon will blink during snooze.

Can I use batteries for backup?

Yes, insert one 9V battery (not included) into the battery compartment to keep the clock and alarm settings during a power failure.

How do I turn off the radio or alarm?

To turn off the radio, press and hold AM/FM/ON/OFF until it shuts off. To stop an alarm, press AM/FM/ON/OFF (alarm will not resume) or Sleep/Snooze (alarm will resume after 9 minutes).

What should I do if the display blinks after a power outage?

This indicates the clock lost power. Reset the time and alarm by following the time setting procedure in the manual.

How do I clean my Manta MA406?

Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any liquids or chemicals.

USER MANUAL MA406 Manta

Abstract black-and-white circular logo with interlocking curved shapes (no text or symbols)

MANTA

Radio FM with Alarm Clock

MA406

Instrukcja obsługi

User's Manual

Bedienungsanleitung

1. am/fm/on/off
2. hour/tu-
3. min/tu+
4. set/pre/m+
5. al 1 / vol-
6. al 2 / vol +
7. sleep/snooze
8. dial pointer
9. display
10. speaker
11. ac power cord

The normal function of the product may be disturbed by strong electro magnetic interference. if so, simply reset the product to resume normal operation by following the instruction manual. in case the function could not resume, please use the product in other location.

Connecting the radio

Plug the ac cord into the power outlet. when electrical power has been interrupted and restored, the clock display will blink. make sure to reset both the correct time and alarm time for proper operation.

Time setting

Press and hold the time set/pre/m+ (4), then the clock display will blink. press the min/tu+ (3) or hour/tu- (2) to set the clock display to the correct time. press set /pre/m+ (4) again when finished the setting, the time display will not blink.

USER'S MANUAL

Radio operation

Press am/fm/on/off (1) once, it will turn on the radio, press am/fm/on/off (1) again to select am band or fm band. press min/tu+ (3) or hour / tu-(2) to adjust your desired frequency. press al 2/vol + (6) to increase the volume, press al 1/vol- (5) to decrease the volume,

Frequency:

FM 88 – 108 mhz

AM 540 – 1600 khz

Memory operation

The clock radio can store 10am and 10fm presets.

On radio playing mode, select your desired band (fm/am), press up min/tu+ (3) or hour / tu-(2) to choose your desired frequency, long press set/pre/m+ (4) to enter into preset mode, the preset

Number will show and flash on the led display (11), then short press hour/tu- (2) or min/tu+ (3) to select your desired memory numbers from p1 to p10.

Press the set/pre/m+ (4) to confirm your memory setting.

Repeat the above steps, you can store your desired stations.

After setting is ok, press set/pre/m+ (4) to select your preset frequency to enjoy radio broadcasting.

Long press am/fm/on/off button (1) to turn off the radio.

Alarm function

Setting alarm 1 by buzzer

In clock display mode, press al 1/vol-button (5) once to select alarm by buzzer, the al1 buzzer icon and alarm time display will flash. using hour/tu-button (2) and min/tu+ button (3) to set your desired alarm hour.

Setting alarm 1 by radio

USER'S MANUAL

In clock display mode, press al 1/vol- button (5) twice to select alarm by radio, the al1 rad icon and alarm time display will flash. using hour/tu- button (2) and min/tu+ button (3) to set your deisred alarm hour.

Setting alarm 2 by buzzer

In clock display mode, press al 2/vol+ button (7) once to select alarm by buzzer, the al2 buzzer icon and alarm time display will flash. using hour/tu- button (2) and min/tu+ button (3) to set your deisred alarm hour.

Setting alarm 2 by radio

In clock display mode, press al 2/vol+ button (6) twice to select alarm by radio, the al2 rad icon and alarm time display will flash. using hour/tu-button (2) and min/tu+ button (3) to set your desired alarm hour.

Sleep function

If you want to listening the radio while fall asleep. you can use sleep function by setting the sleep time.

With the radio on, press the sleep / snooze button(7) to enter into sleep mode, the 90 no. shows on the led display (9). it states 90-minutes of sleep time and to be setted in sequence 90-80-70-60-50-40-30-20-10-off. press the sleep / snooze button (7) to choose your desired sleep time, the sleep timer will change by 10 minutes each time you press the sleep button (7). the unit will stop playing when the timer countdowns from the preset sleep time to the end and then switch off by itself.

Snooze function

On alarm sound mode, press am/fm/on/off (1) to stop the alarm, the alarm will not resume. but if you press the sleep/snooze button (7) to stop the alarm, the al icon of the led display (9) will blink, and the alarm will resume after 9 minutes.

USER'S MANUAL

Battery backup

This clock has a backup power system to ensure continuous operation during power failure. insert one 9-volt battery and the clock mechanism will continue to maintain the current time and alarm program.

EN

BEDIENUNGSANLEITUNG

Bedienungsanleitung

DE

Beschreibung