CLP 4550 - Printer Triumph-Adler - Free user manual and instructions
Find the device manual for free CLP 4550 Triumph-Adler in PDF.
User questions about CLP 4550 Triumph-Adler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Printer in PDF format for free! Find your manual CLP 4550 - Triumph-Adler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLP 4550 by Triumph-Adler.
USER MANUAL CLP 4550 Triumph-Adler
natural_image
Office worker in office chair working at computer with monitor and keyboard (no visible text or symbols)Bedienungsanleitung
CLP4550
natural_image
Exterior view of a black office typewriter with multiple paper sheets and control panels (no visible text or symbols)Farbdrucker
Einleitung
Monotype Imaging License Agreement
1 "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
8 THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED.
9 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
10 IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.
11 Massachusetts U.S.A. law governs this Agreement.
12 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
13 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.
GPL
Copyright © 1998-2006 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission.
For written permission, please contact openssl-core@openssl.org.
5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Original SSLeay License
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).
4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
Compliance and Conformity
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The use of a non-shielded interface cable with the referenced device is prohibited.
CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
* The above warning is valid only in the United States of America.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.
Ozonkonzentration
text_image
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKTEnergiesparfunktion
Energy Star (ENERGY STAR®)-Program
natural_image
Line drawing of four people gathered around a large industrial machine (no text or symbols visible)Lists the fonts installed on the printer and explains the available printer interfaces, the environmental setting commands, the optional products and the printer's specifications.
Konventionen
Status Monitor Symbol
natural_image
Diagram of a green rectangular tray inside a container, with no visible text or symbolsnatural_image
Two technical diagrams showing a green component with an arrow indicating direction, placed on a tray (no text or symbols present)Umschläge
natural_image
Diagram of a mechanical component with a green section and an inset showing a green arrow (no text or symbols)
natural_image
Illustration of hands holding a piece of wood with a directional arrow indicating movement (no text or symbols)natural_image
Illustration of two hands holding a rectangular object with a downward arrow indicating motion or change (no text or symbols)
natural_image
Illustration of a hand inserting a green plastic component into a housing (no text or symbols)natural_image
Illustration of a hand placing a green component into a machine drawer with arrows indicating motion (no text or symbols)natural_image
Diagram of a hand inserting a green component into a device casing (no text or symbols visible)natural_image
Technical line drawing of a mechanical assembly with an inset showing a component detail (no text or symbols)natural_image
Illustration of a hand inserting a green card into a machine drawer with an arrow indicating the direction (no text or symbols present)natural_image
Illustration of two hands holding a curved wooden plank with visible grain and a black arrow indicating rotation (no text or symbols)natural_image
Illustration of two hands holding a rectangular object with a downward arrow indicating motion or force (no text or symbols)natural_image
Illustration of a hand inserting a card into a computer monitor with a green screen and black arrow indicating rotation (no text or symbols)natural_image
Diagram of a device with a green plastic tray inserted into a housing, showing internal components and an arrow indicating direction (no text or symbols present)text_image
A4.7 B6.7 A3.7 B5.7 A1.7 F0.7 A2.7 B5.7 B4.7
natural_image
Illustration of a hand pressing down on a green surface inside a computer oven (no text or symbols visible)natural_image
Diagram showing a green arrow pointing to a mechanical component on a textured surface (no text or symbols)The following table provides the results of the 2018 and 2019 annual estimates, including estimates for the year ended March 31, 2017, and 2018. The results are based on the present estimate of the 2018 and 2019 estimates.
text_image
Details: Ordnerame: 1/2 ABCDEFGHIJKLMNOPQRSTUVWXYZ... [ Detail ]text_image
Details: ABCDEFGHIJKLMNOPQRSTUVWXYZ.txt [ Detail ]text_image
Emulation: 0/1 *PCL6 0 2 KPDL 0 3 KPDL (Auto)
text_image
Emulation setzen: ◆ OK 01 Emulation 02 KPDL Fehlerliste [ Beenden ]
text_image
KPDL Fehlerliste: ◆ OK 01 *Aus 02 Eintext_image
IP Adresse: 123.145.167.123 OKtext_image
Standard Gateway: ◆ OK 123.145.167.123 △
text_image
Bonjour: 01 Aus 02 *Ein
text_image
IPv6 einstellen: ◆ OK 01 TCP/IP (IPv6) 02 RA(Stateless) 03 DHCPv6 [ Beenden ]
text_image
TCP/IP (IPv6): 01 Aus 02*Eintext_image
RA(Stateless): 01 Aus 02 *FinRA (Stateless) Einstellungen
Dunkler -2
Dunkler -1
Normal 0
Heller +1
Heller +2
bar
Color Registration Correction Chart | Chart | Color | Value | |---|---|---| | 1 | N-3 | 10.5 | | 2 | G-3 | 10.4 | | 3 | C-3 | 10.3 | | 4 | S-3 | 10.2 | | 5 | V-3 | 10.1 | | 6 | T-3 | 10.0 | | 7 | G-3 | 9.9 | | 8 | C-3 | 9.8 | | 9 | I-3 | 9.7 | | 10 | E-3 | 9.6 | | 11 | F-3 | 9.5 | | 12 | D-3 | 9.4 | | 13 | E-3 | 9.3 | | 14 | G-3 | 9.2 | | 15 | H-3 | 9.1 | | 16 | I-3 | 9.0 | | 17 | G-3 | 8.9 | | 18 | C-3 | 8.8 | | 19 | S-3 | 8.7 | | 20 | T-3 | 8.6 | | 21 | G-3 | 8.5 | | 22 | C-3 | 8.4 | | 23 | I-3 | 8.3 | | 24 | E-3 | 8.2 | | 25 | F-3 | 8.1 | | 26 | D-3 | 8.0 | | 27 | G-3 | 7.9 | | 28 | H-3 | 7.8 | | 29 | V-3 | 7.7 | | 30 | T-3 | 7.6 | | 31 | G-3 | 7.5 | | 32 | C-3 | 7.4 | | 33 | I-3 | 7.3 | | 34 | E-3 | 7.2 | | 35 | F-3 | 7.1 | | 36 | D-3 | 7.0 | | 37 | G-3 | 6.9 | | 38 | H-3 | 6.8 | | 39 | V-3 | 6.7 | | 40 | T-3 | 6.6 | | 41 | G-3 | 6.5 | | 42 | C-3 | 6.4 | | 43 | I-3 | 6.3 | | 44 | E-3 | 6.2 | | 45 | D-3 | 6.1 | | 46 | G-3 | 6.0 | | 47 | H-3 | 5.9 | | 48 | V-3 | 5.8 | | 49 | T-3 | 5.7 | | 50 | G-3 | 5.6 | | 51 | C-3 | 5.5 | | 52 | I-3 | 5.4 | | 53 | E-3 | 5.3 | | 54 | D-3 | 5.2 | | 55 | G-3 | 5.1 | | 56 | H-3 | 5.0 | | 57 | V-3 | 4.9 | | 58 | T-3 | 4.8 | | 59 | G-3 | 4.7 | | 60 | C-3 | 4.6 | | 61 | I-3 | 4.5 | | 62 | E-3 | 4.4 | | 63 | D-3 | 4.3 | | 64 | G-3 | 4.2 | | 65 | H-3 | 4.1 | | 66 | V-3 | 4.0 | | 67 | T-3 | 3.9 | | 68 | G-3 | 3.8 | | 69 | C-3 | 3.7 | | 70 | I-3 | 3.6 | | 71 | E-3 | 3.5 | | 72 | D-3 | 3.4 | | 73 | G-3 | 3.3 | | 74 | H-3 | 3.2 | | 75 | V-3 | 3.1 | The chart displays a series of colored bars (color) corresponding to the color registration correction index (Y-axis). The X-axis is labeled by the number of letters (e.g., 'N', 'E', 'C') in the top row.text_image
Justiere Cyan: (I - A, 0 - 9) H-F: 0 V: 0 H-R: 0
text_image
Justiere Yellow: (I - A, 0 - 9) H-F: 0 V: 0 H-R: 0text_image
Einstell./Wartung: OK (I - A, 0 - 9) H-1: 0 H-2: 0 H-3: 0 H-4: 0 H-5: 0 H-6: 0 H-7: 0 V-3: 0
text_image
IGECA13579 HPDB02468 B B I H F E C A 0 2 3 5 6 8 9
text_image
Einstell./Wartung: OK (I - A, 0 - 9) H-1: B H-2: 0 H-3: 0 H-4: 0 H-5: 0 H-6: 0 H-7: 0 V-3: 0text_image
Justiere Cyan: (I - A, 0 - 9) H-1: 0 H-2: 0 H-3: 0 H-4: 0 H-5: 0 H-6: 0 H-7: 0 V-3: 0
text_image
Justiere Yellow: (I - A, 0 - 9) H-1: 0 H-2: 0 H-3: 0 H-4: 0 H-5: 0 H-6: 0 H-7: 0 V-3: 0natural_image
Illustration of a hand inserting a green box into a machine (no text or symbols visible)natural_image
Hand inserting a green scroll into a mechanical component (no text or symbols visible)natural_image
Illustration of hands installing or adjusting a green component on a mechanical device (no text or symbols visible)natural_image
Illustration of hands holding a green box with a black arrow pointing to it, inside a vehicle or industrial setting (no text or symbols visible)
natural_image
Illustration of hands operating a medical device with tubing and a green mesh component (no text or symbols visible)natural_image
Illustration of hands holding a green electronic device with two double-headed arrows indicating bidirectional movement (no text or symbols)natural_image
Illustration of hands installing or adjusting a green mechanical component with an arrow indicating the process (no text or symbols present)natural_image
Hand holding a green component in a mechanical assembly (no text or symbols visible)natural_image
Illustration of a hand inserting a green paper into a machine drawer (no text or symbols)text_image
Diagram showing a hand inserting a component into a device with an arrow indicating the process, accompanied by a close-up of the component being inserted.natural_image
Diagram of a mechanical component with a green component and black arrow indicating rotation (no text or symbols)natural_image
Hand inserting a green plastic component into a control panel (no text or symbols visible)natural_image
Simple line drawing of a mechanical component with a green handle and black arrow indicating direction (no text or symbols)natural_image
Line drawing of a mechanical component with a handle and green clamped parts (no text or symbols)natural_image
Hand placing a green plastic bag into a drawer with a black arrow indicating rotation (no text or symbols)natural_image
Line drawing of a hand inserting a green component into a device (no text or symbols visible)natural_image
Diagram of a green plastic electronic component being inserted into a computer interface (no text or symbols visible)natural_image
Illustration of a hand inserting a green paper into a machine (no text or symbols visible)natural_image
Technical line drawing of a mechanical component with a black arrow pointing to a green component (no text or symbols present)natural_image
Illustration of hands operating a printer with a green screen and black arrows indicating motion (no text or symbols)natural_image
Technical line drawing of a mechanical assembly with no visible text or symbolstext_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' control panel visiblenatural_image
Illustration of a hand inserting a green printer into a machine (no text or symbols visible)natural_image
Technical line drawing of a mechanical component with a black arrow pointing to a specific part (no text or symbols present)natural_image
Illustration of hands operating a printer with a green cover and black arrows indicating rotation (no text or symbols)natural_image
Illustration of hands operating a printer or scanner with a green cover, no text or symbols visibletext_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' control panel open, indicating file or action.natural_image
Illustration of hands operating a printer with a green cover and arrow indicating rotation (no text or symbols)natural_image
Illustration of a printer's internal structure with green paper being placed on top (no text or symbols visible)natural_image
Illustration of a hand inserting a green plastic component into a housing (no text or symbols)natural_image
Line drawing of a hand cleaning a green cloth on a mechanical device (no text or symbols)text_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' control panel, indicating a switch or press operation.natural_image
Illustration of a hand inserting a green card into a wall-mounted device (no text or symbols visible)natural_image
Illustration of a hand inserting a green card into a rack inside a refrigerator (no text or symbols visible)natural_image
Illustration of a hand using a green tool to adjust or install a device component, with an arrow indicating the process (no text or symbols present)natural_image
Illustration of a hand cleaning a green cloth on a wooden shelf (no text or symbols)natural_image
Illustration of a hand inserting a green card into a door panel (no text or symbols)natural_image
Illustration of a hand inserting a green card into a file holder (no text or symbols visible)natural_image
Illustration of a hand inserting a green plastic component into a machine (no text or symbols)natural_image
Line drawing of a hand cleaning a green cloth inside a machine (no text or symbols)natural_image
Illustration of a hand pressing down on a green fabric or material inside a machine (no text or symbols visible)natural_image
Illustration of a hand pressing down on a green tray inside a container (no text or symbols)natural_image
Illustration of hands inserting a green card into a printer (no text or symbols visible)natural_image
Illustration of a printer's internal structure with a green cover and black arrow indicating a process (no text or symbols present)text_image
Diagram showing hands installing a green component in an electronic device with labeled part B1natural_image
Illustration of a hand inserting a green tab into a computer motherboard (no text or symbols visible)natural_image
Illustration of a hand inserting a green plastic component into a housing (no text or symbols)natural_image
Technical line drawing of a mechanical assembly with a green component and directional arrow (no text or symbols)natural_image
Illustration of a printer's internal structure with a green cover and arrow indicating assembly (no text or symbols)natural_image
Illustration of a hand pressing down on a green plastic component into a machine (no text or symbols visible)natural_image
Illustration of hands installing or adjusting a green panel inside a device (no text or symbols visible)text_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' button labeled in the inset.natural_image
Illustration of hands inserting a green card into a printer (no text or symbols visible)natural_image
Illustration of hands operating a printer with a green cover and arrow indicating rotation (no text or symbols)natural_image
Illustration of hands operating a printer with a green screen and arrow indicating action (no text or symbols present)natural_image
Illustration of a hand inserting a green component into a device panel (no text or symbols visible)natural_image
Hand pressing down on a green plastic sheet inside a refrigerator (no text or symbols visible)
text_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' control panel, indicating a shift or refresh operation.natural_image
Illustration of hands operating a printer with a green screen and arrow indicating rotation (no text or symbols)natural_image
Illustration of a hand inserting a green plastic component into a rack with mechanical parts (no text or symbols)text_image
Diagram showing hand inserting a device into a printer with an 'PUSH' control panel labeled in Chinesetext_image
Diagram showing a hand pressing a green card into a device with a black arrow indicating the action.natural_image
Illustration of a hand inserting or removing a green card into a grid-like structure (no text or symbols)natural_image
Line drawing of a hand cleaning a green fabric on a mechanical component (no text or symbols)natural_image
Illustration of hands operating a printer with a green cover and arrow indicating action (no text or symbols present)natural_image
Illustration of a printer's internal structure with a hand holding a green cover, showing no text or symbols.natural_image
Illustration of a hand pressing down on a mechanical component with a green cover and arrow indicating direction (no text or symbols)
text_image
Diagram showing hands installing or adjusting a green component inside a device, with an arrow indicating the process and an inset close-up of the component.natural_image
Illustration of hands operating a printer with a green cover and arrow indicating motion (no text or symbols)natural_image
Illustration of a printer emitting air from a green cover, with motion lines indicating airflow (no text or symbols)natural_image
Illustration of a printer being inserted into a slot, showing mechanical components and paper feed (no text or symbols)text_image
Diagram showing a hand inserting a device into a printer with an 'PUSH' button, indicating a directional shift or press operation.Hi-Speed (max. 480 Mbit/s)
Full-Speed (max. 12 Mbit/s)
Stromversorgung
VCCI Class B, FCC Class B (U.S.), CE (Europe)
natural_image
Technical line drawing of a computer tower with screwdriver inserted, showing internal components and mounting holes (no text or symbols)natural_image
Technical line drawing of a printer or printer with a hand pointing to the component (no text or symbols visible)text_image
Technical diagram showing a machine assembly with labeled components and directional arrows indicating motion or movement.natural_image
Technical line drawing of an internal machine with a highlighted component (no text or symbols)natural_image
Illustration of a multi-tiered storage cabinet with drawers and control panels (no text or symbols)natural_image
Illustration of a kitchen appliance with a green cabinet and handle (no text or symbols)natural_image
Technical line drawing of a mechanical device with no visible text or symbolsDokument-Finisher
natural_image
Technical line drawing of a mechanical device with two protruding blades (no text or symbols)DHCP (Dynamic Host Configuration Protocol)
Attention.... 1-5, 4-5
Data 1-5, 4-5
Privater Druck. 4-36
Canceling a Printing Job. 4-6
D
Data Security Kit A-9
Datumseinstell. 4-73
Dickes Papier 3-11
Interface block. 4-92
Netzwerk. 4-86
Installation.... A-7
Status Monitor.... 2-10
Statusseite 4-13
Inhalt 4-13