LP 4230 - Printer Triumph-Adler - Free user manual and instructions

USER MANUAL LP 4230 Triumph-Adler

Woman in office chair working at a desk with computer monitors and documents (no visible text or symbols)

Bedienungsanleitung

LP 4230

Exterior view of a white paper printer with multiple stacked units and control panel (no visible text or symbols)

Laserdrucker s/w

GEEA (Group for Energy Efficient Appliances)

IBM Program License Agreement

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PROGRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE, THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization, grants you a license for the Programs only in the country where you acquired the Programs. You obtain no rights other than those granted you under this license.

The term "Programs" means the original and all whole or partial copies of it, including modified copies or portions merged into other programs. IBM retains title to the Programs. IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party.

If you transfer the Programs, you must transfer a copy of this license and any other documentation to the other party. Your license is then terminated. The other party agrees to these terms and conditions by its first use of the Program.

You may not:

1. use, copy, modify, merge, or transfer copies of the Program except as provided in this license;

2. reverse assemble or reverse compile the Program; or

3. sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided "AS IS."

THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

3. Limitation of Remedies

IBM's entire liability under this license is the following;

For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be for actual damages only and will be limited to the greater of:

1. the equivalent of U.S. \$25,000 in your local currency; or
2. IBM's then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable.

IBM will not be liable for any lost profits, lost savings, or any incidental damages or other economic consequential damages, even if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM will not be liable for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to comply with the terms and conditions of this license. In either event, you must destroy all your copies of the Program. You are responsible for payment of any taxes, including personal property taxes, resulting from this license. Neither party may bring an action, regardless of form, more than two years after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New York. If you acquired the Program in Canada, this license is governed by the laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program.

Typeface Trademark Anerkennung

Monotype Imaging License Agreement

1. "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.

2. You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3. To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.

4. You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5. This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6. You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7. Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
8. THE PARTIES AGREE THAT ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDED.
9. Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
10. IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.
11. Massachusetts U.S.A. law governs this Agreement.
12. You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
13. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
14. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.

GPL

Copyright © 1998-2006 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright © 1995-1998 Eric Young ([e-mail]) All rights reserved.

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes cryptographic software written by Eric Young ([e-mail])"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).
4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:
"This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Compliance and Conformity

FCC statement (for users in the United States and Canada)

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Properly shielded grounded cables and connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Precautions for Use

Any modifications without prior permission of Kyocera may cause harmful interference.

If any modifications or changes are made to this equipment without prior permission of Kyocera, Kyocera as the manufacturer does not guarantee the compliance with the FCC Rules. The use of equipment that does not comply with the FCC Rules is prohibited.

Sicherheitshinweise

Laser Sicherheit

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.

Ozonkonzentration

Energy Star (ENERGY STAR®) Program

200mm 300mm 300mm 200mm 500mm

Technical diagram of a computer printer with numbered parts for identification

Technical diagram of a computer monitor with numbered parts labeled 11 to 15

Diagram of a printer's internal structure showing paper feed and paper tray (no text or symbols)

Illustration of two hands holding a rectangular object with directional arrows indicating movement or force (no text or symbols)

Diagram showing hands operating a printer with an arrow indicating the process, and a magnified view of the printer's tip.

Farbiges Papier

Illustration of hands holding a curved object with motion arrows indicating movement (no text or symbols)

Illustration of a printer being inserted into a rack, showing internal components and a hand holding the tray (no text or symbols present)

Diagram showing hands assembling a mechanical component with an inset close-up of a device (no text or symbols present)

Illustration of hands assembling a mechanical component with an inset showing a mechanical assembly (no text or symbols visible)

Diagram of a vehicle interior with hand placement and zoomed-in detail view highlighting structural components

Illustration of hands assembling a laptop with an upward arrow indicating the component (no text or symbols present)

Technical line drawing of a mechanical component with cross-sectional views and a no-smoking symbol (no text or labels)

Illustration of a printer being inserted into a paper holder, showing internal components and a hand holding the paper (no text or symbols present)

Line drawing of a door panel with a small rectangular object inside (no text or symbols)

Diagram of a device's internal structure showing a component being inserted into a tray (no text or symbols visible)

Line drawing of hands installing or adjusting a device component with bidirectional arrows (no text or symbols)

Diagram of a printer's internal structure showing paper feeding into a tray with an arrow indicating the bottom portion (no text or symbols present)

Illustration of hands operating a printer with two views of the printer (no text or symbols present)

Diagram showing two labeled parts (1 and 2) of a printer or printer with arrows indicating rotation or assembly.

Diagram showing computer setup with battery, computer monitor, and USB cable connection

Diagram showing connection between a printer and network device with USB cable and port labels

Diagram showing installation of an electronic device with cable and power outlet, plus a magnified view of the cable being inserted.

Diagram showing a computer setup with a dial indicator and a close-up of the right button labeled '15' pointing to it.

Status Monitor Symbol

Illustration of hands operating a computer with a scroll wheel (no text or symbols visible)

Diagram illustrating a printer press operation with labeled steps and a lock mechanism

Diagram of a mechanical device with a curved arrow indicating motion or force, no text or symbols present

Illustration of hands installing or opening a printer into a machine, showing the process with a magnified inset (no text or symbols present)

Diagram showing a hand holding a lock and opening a printer into a rack, with an inset highlighting the lock mechanism.

Two-step diagram showing hands operating a printer into a device, with no visible text or symbols.

Technical line drawing of a printer with a prohibition symbol (no text or labels present)

Technical illustration of a mechanical assembly with hand operating a component, showing internal gears and motion arrows (no text or symbols)

Illustration of hands operating a printer press with an inset showing a printer mechanism (no text or symbols)

Illustration of hands installing or adjusting a mechanical component with arrows indicating motion (no text or symbols present)

Illustration of hands installing or adjusting a mechanical device into a machine (no text or symbols visible)

Diagram of a printer's paper roll being inserted into a slot, with a hand adjusting the page (no text or symbols present)

Illustration of hands operating a printer with a paper sheet and an arrow symbol (no text or labels)

Illustration of two printer printing or disassembly steps, showing hand placement and sheeting (no text or symbols)

Diagram illustrating a mechanical device operation with labeled parts and directional arrows indicating assembly steps.

Diagram illustrating a mechanical or electrical process with labeled steps and directional arrows indicating movement.

Illustration of a hand inserting a printer into a paper (no text or symbols visible)

Line drawing of hands operating a printer or scanner device with an arrow indicating the process (no text or symbols present)

Illustration of hands operating a printer with arrows indicating process steps (no text or symbols present)

Diagram of a printer's internal structure showing hands inserting a component into a paper (no text or symbols visible)

Illustration of hands installing or adjusting a mechanical device into a storage unit (no text or symbols visible)

Illustration of hands operating a mechanical device with an arrow indicating motion (no text or symbols present)

Illustration of a printer with a paper being inserted, showing hands and a paper clip (no text or symbols)

Illustration of a computer printer with an inset close-up showing the internal structure (no text or symbols)

Circular diagram with four quadrants and a question mark, no text or symbols present

on the 9th and 10th (as of 3)

with a total of 100,000 units and an additional 100 unit of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total

1. 2017年

Jia Zhenkai will be the leader and do not listen to us. Any update will be the following key to the 2001-2011

***

我国全球东部沿海东南部全球内陆增长趋势

1. DUE AT AND PARTS RELATI

2.1.1 本次股东大会的决议有效期

[Unreadable due to extreme blurriness]

The following text in the above section of the above section is part of the above section of the above section of the lower section. The above section of the lower section is part of the upper section of the upper section of the lower section of the lower section of the lower section of the upper section.

项目项目变更及备注

Data (2) with no non-dense data from the 1990s, 2013, and 2014. The non-dense data are based on the 2015 data provided in Table 2a, 2016, 2017, and 2018. Data is also available for the 2019 data.

Illustration of a printer being inserted into a circuit board (no text or symbols visible)

PCL 6 (Standard)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850 

Line drawing of two hands holding a ruler and a strip (no text or symbols)

Falsch

Line drawing of a hand holding a ruler placed on a memory card (no text or symbols)

Illustration of hands holding a card with a circular object and an arrow indicating rotation (no text or symbols)

Hand inserting a device into a rectangular box with an arrow indicating rotation (no text or symbols)

Diagram illustrating a device's internal structure and assembly, showing labeled components and directional arrows indicating movement.

Line drawing of a stack of paper or printer units with no visible text or symbols

Line drawing of a computer printer internal structure with a curved arrow indicating a component (no text or symbols present)

Line drawing of a computer printer internal structure with scroll arrows indicating motion (no text or symbols)

Diagram showing a computer monitor with an open door and a close-up of its screen (no text or symbols present)

High speed (max. 480 Mbit/s)

Full-Speed (max. 12 Mbit/s)

Stromversorgung

VCCI Class B, FCC Class B (U.S.), CE (Europa)

DHCP (Dynamic Host Configuration Protocol)

SSL (Secure Sockets Layer) Server 7-62